6 layers122 × 98 mm
RF
143 boardsKiCad boards from 46 GitHub repositories tagged “rf”, the most starred first; open any of them in PCBKit.
- 6 layers45.5 × 96 mm
- 4 layers66.5 × 93.5 mm
- 4 layers55 × 73.5 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 6 layers58.6 × 38 mm
Rosenberger 32K242-40ML5 testboard v2
toammann/Multilayer_SMA2Microstrip
Development of an SMA coaxial to microstrip transition using open source software (openEMS)
2 parts55CC0-1.0 - 2 layers25.4 × 45.7 mm
- 2 layers99.6 × 87.6 mm
RF ProtoBoard Extended
maelh/radio-frequency-prototype-boards
Radio frequency prototype boards (based on MegawattKS' design)
12 parts30BSD-3-Clause - 2 layers44.5 × 43.2 mm
Power meter
sh123/nano_power_meter
Dual channel Arduino Nano milliwatt power meter for HF/VHF/UHF/SHF bands
23 parts30GPL-2.0 - 4 layers100 × 100 mm
MWGEN G1
MR-DOS/MWGEN-G1
12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
373 parts18GPL-3.0 - 4 layers35 × 70 mm
- 2 layers100 × 70 mm
- 4 layers238.4 × 144.7 mm
- 4 layers40 × 30 mm
- 4 layers59 × 18 mm
STM32WLE5 RF dongle
FBS93/STM32WLE5_RF_dongle
Compact RF dongle designed for wireless communication through USB.
70 parts9 - 2 layers
Vhf uhf IQ Modulator
antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
88 parts7GPL-3.0 - 2 layers20 × 19.5 mm
XL7105-SY B Breakout
mcauser/XL7105-SY-B-Breakout
Breakout board for the XL7105-SY-B 2.4GHz RF transceiver module
2 parts6MIT - 2 layers54.1 × 21.9 mm
- 2 layers40.3 × 44.2 mm
MiniWhip
oe2lsp/miniWhip
miniWhip Antenna, E-Field Antenna, capacitive antenna, DXLwhip, DXL-miniWhip, DXLminiWhip
41 parts6GPL-2.0 - 4 layers49.3 × 34.1 mm
Dattalogger Board
DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
30 parts4 - 4 layers50.1 × 85.2 mm
LIONv3
RodrigoCAndrade/LIONv3-R
The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
89 parts4 - 2 layers46 × 75.9 mm
NRF24Radio STM32G431KB
denysderihlazov/stm32-nrf24-wireless-node
Custom STM32G431KBT6 + nRF24L01 wireless communication module with SSD1306 OLED interface, 2-layer PCB and STM32 HAL firmware. Hardware (KiCad), Gerbers, BOM and documentation included.
56 parts3MIT - 2 layers20 × 65 mm
019-tayloe quadrature product detector
Halogenek/modular-rf-bench
Cheap and simple setup for learning RF electronics
30 parts3 - 2 layers45.7 × 47.5 mm
