4 layers24 × 27.3 mm
Aaronjamt Framework IR Module
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915
4 layers46 × 69 mm
high frequency RF amp based on GALI2+ monolithic amplifiers
- Size
- 46 × 69 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 24
- Pads
- 134
- Tracks, vias
- 141, 46
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Apr 2024
- Updated
- 6 Apr 2024
Overview
Amp is an open-source printed circuit board by WillMatthews, from the WillMatthews/rf-amp repository on GitHub, published under the MIT licence. It is a 4-layer board of 46 × 69 mm with 39 parts on 24 nets, routed with 141 tracks and 46 vias.
Its parts include 14 capacitors, 6 connectors, 5 ICs, 4 resistors and 3 inductors. It belongs with the audio and music and radio and wireless boards of this library.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | C | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C6, C12 |
| 5 | C | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11 |
| 5 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J1, J2, J3, J4, J5 |
| 4 | 240R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | GALI-2 | Package_TO_SOT_SMD:SOT-89-3 | U1, U2, U3 |
| 3 | L | inductor:GU1604 | L1, L2, L3 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | LM317L_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5 |
| 2 | R_POT_TRIM | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1, RV2 |
| 1 | RF_Shield_One_Piece | RF_Shielding:Laird_Technologies_BMI-S-230-F_50.8x38.1mm | J7 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
Questions
How big is the Amp PCB?
It measures 46 × 69 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Amp use?
39 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amp KiCad files?
From the WillMatthews/rf-amp repository on GitHub, at the commit this page was made from: the board is amp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amp design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers20.3 × 48.3 mm
BlueMacro
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
39 parts100BSD-3-Clause - 4 layers26 × 30 mm
Day 03 ECG SPO2
i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
39 parts95CERN-OHL-P-2.0 - 4 layers67.8 × 18.3 mm
- 4 layers51.5 × 26.5 mm
Servo dev board
OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
39 parts39Apache-2.0 - 4 layers54 × 11.6 mm
BrodBoost PD
axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
39 parts38 - 4 layers79 × 39.1 mm
Connector pcb
festlv/mso5000-logic-probe
Cheap logic probe for Rigol MSO5000-series oscilloscopes
39 parts37MIT - 4 layers46.7 × 46.7 mm
1.5V switcher test
oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects
39 parts34CERN-OHL-S-2.0