2 layers100 × 50 mm
PCB layout
319 boardsKiCad boards from 113 GitHub repositories tagged “pcb-layout”, the most starred first; open any of them in PCBKit.
- 2 layers50 × 50 mm
Pcb ch552 devboard
cfrankb/pcb_ch552_devboard
CH552 Devboard with ON/OFF switch, BOOT and RESET buttons. Indicator lights and lots of pins.
33 parts1 - 2 layers21 × 50 mm
Atmega32u4 dev board
Coolbots7/development-boards
Collection of PCBs for testing core designs.
39 parts1 - 2 layers35.5 × 20.8 mm
Two led indicator
Deepu-Bhai5/two-led-indicator-pcb
A beginner KiCad PCB design project for a two-channel LED indicator, covering schematic capture, PCB layout, routing, DRC validation, and Gerber generation.
5 parts1 - 2 layers41 × 31 mm
STM32 hardware design Course
Fred98246/STM-32-PCB-Design
Custom STM32F103C8T6 development board
32 parts1MIT - 2 layers51.8 × 31 mm
ESP32-WROOM-32
Habib-creater/esp32-wroom-32-usb-development-board
Professional ESP32-WROOM-32 development board with USB-UART programming, 3.3V regulation, BOOT/RESET control, GPIO expansion, I2C ESD protection, and complete KiCad manufacturing documentation.
29 parts1CERN-OHL-S-2.0 - 2 layers90 × 40 mm
LiIon Battery Protection
imguxuuuu/Battery-Protection-PCB
Manufacturing-ready Li-Ion Battery Protection PCB designed using KiCad 9 with complete documentation, Gerber files, simulations, and manufacturing package.
11 parts1MIT - 6 layers
- 2 layers60 × 50 mm
Servo Controller-555
shlok-ac/Servo-Controller-555
A 555 timer based servo controller designed in KiCad, including the schematic, PCB layout, 3D model, and fabrication files
20 parts1CERN-OHL-S-2.0 - 2 layers58.4 × 31.8 mm
- 4 layers42.5 × 58.5 mm
STM32 GPS Tracking Module
tejashviraj19/PCB-Design-Lab
PCB Design projects, KiCad layouts, embedded hardware experiments, and fabrication-ready PCB designs.
61 parts1 - 2 layers85.7 × 85.7 mm
Attiny85 time switch
UCSIG/attiny85_time_switch
Low-power time switch using the ATtiny85 microcontroller.
32 parts1MIT - 2 layers90 × 43 mm
- 2 layers
Alinhamento com furos KiCad - novo
Vitorbnc/haxmark460
Direct PCB printer based on a Lexmark E460dn
11 parts1Apache-2.0 - 2 layers48.9 × 56 mm
EMLeakage
1sand0s/AT89S51-8051-General-Purpose-Board
This is a general purpose AT89S51 (8051) board.
23 partsMIT - 2 layers73.7 × 57.1 mm
LightDudu4Lila
AleBerta311/LightPCB
A simple PCB schematic for USB LED light that turns on when it's dark.
36 partsGPL-3.0 - 2 layers43.2 × 47 mm
Current sink or swim
ALeggeUp/current-sink-or-swim
Project work from The Online Electronics Aprenticeship program at Contextual Electronics
29 partsCC-BY-SA-4.0 - 2 layers14.5 × 8.6 mm
Getting to blinky
ALeggeUp/getting-to-blinky
This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box…
17 partsCC-BY-SA-4.0 - 2 layers23.4 × 24.6 mm
Ifm spark dev
ALeggeUp/ifm-spark-dev
IFM Spark Dev Board is a minimal Cortex-M0 dev board for experimentation. The firmware is an example project that uses Gradle to build and test an embedded application.
25 partsCC-BY-SA-4.0 - 2 layers26 × 23.5 mm
Power wheel ubuck
ALeggeUp/power-wheel-ubuck
This project is a synchronous buck converter providing 5V at 3A from 4.5-V to 17-V input.
45 partsCC-BY-SA-4.0 - 2 layers100 × 61 mm
Badge
AnakinDmaker/badge_pcb
KiCad PCB design for a custom ESP32-S3 smart badge — schematic, layout, and silkscreen art
27 partsMIT - 6 layers120 × 40 mm
CM5Carrier
AsadImranRafique/CM5-Carrier-Board
Custom Raspberry Pi CM4/CM5 carrier board with PoE, Gigabit Ethernet, M.2 NVMe, microSD and peripheral interfaces.
54 partsApache-2.0 - 2 layers55.9 × 69.9 mm
Arduino ir relay
danshick/arduino-ir-relay
Schematic, PCB, custom footprints, plots, and code for an arduino based remote control relay rig
17 parts - 10 layers133.4 × 31.3 mm
Ddr4-8gb udimm
dganin-hw/ddr4-8gb-udimm
Модуль памяти DDR4 UDIMM 8 ГБ: проект KiCad, 10-слойная плата, файлы для производства. Прототип, не изготавливался.
306 parts