
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box…
Getting to blinky is an open-source printed circuit board by ALeggeUp, from the ALeggeUp/getting-to-blinky repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 14.5 × 8.6 mm with 17 parts on 12 nets, routed with 114 tracks and 10 vias.
It is built around the ICM7555N, BC808-40 and BC818-40, with the JS202011SCQN among its other parts. Its parts include 8 resistors, 2 diodes, 2 transistors, 1 capacitor and 1 IC.

This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.2K | Resistors_SMD:R_0805_HandSoldering | R5, R7 |
| 2 | 55 | Resistors_SMD:R_0805_HandSoldering | R2, R3 |
| 2 | 720 | Resistors_SMD:R_0805_HandSoldering | R6, R8 |
| 2 | LED | LEDs:LED_0805 | D1, D2 |
| 1 | 10U | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Hand | C1 |
| 1 | 110K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 470 | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | BC808-40 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | BC818-40 | TO_SOT_Packages_SMD:SOT-23 | Q2 |
| 1 | Battery_Cell | ALU_Connectors:BAT-HLD-001-CR2032 | BT1 |
| 1 | ICM7555 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | JS202011SCQN | ALU_Connectors:JS202011SCQN | SW1 |
| 1 | MountingHole_2.5mm | Mounting_Holes:MountingHole_2.5mm | HOLE |

mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework




PStinno/led-spinner-pcb
My first two layer PCB, spinning LED effect with no micro-controller or code.

timbalicious/netrunner_paragon_pcb
Possibly functional PCB alt-art Paragon for the Netrunner LCG


It measures 14.5 × 8.6 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ICM7555N, BC808-40, BC818-40 and JS202011SCQN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ALeggeUp/getting-to-blinky repository on GitHub, at the commit this page was made from: the board is getting-to-blinky.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).