Skip to the content

Open hardware

629 boards

KiCad boards from 316 GitHub repositories tagged “open-hardware”, the most starred first; open any of them in PCBKit.

  • 2 layers334.6 × 100.2 mmLira, the printed circuit board in 3D

    Lira

    AndreaGiulianini/lira

    57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.

    233 parts2MIT
  • 2 layers143 × 118 mmMultiplexer cell tester, the printed circuit board in 3D

    Multiplexer cell tester

    Big-Red-Sat/Perovskite-Curve-Tracer

    This repository contains the source hardware and software files for a passive, solar cell, curve tracer.

    111 parts2
  • 2 layers40 × 21.1 mmMicroscope LED, the printed circuit board in 3D

    Microscope LED

    CGrassin/microscope_led_light_circuit

    A dimming LED circuit designed for optical microscopes.

    20 parts2CC-BY-4.0
  • 2 layers66.6 × 41.3 mmUPIC46, the printed circuit board in 3D

    UPIC46

    emertcakir/uPIC46

    PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs

    111 parts2MIT
  • 4 layers48.8 × 46.3 mmShard, the printed circuit board in 3D

    Shard

    Ender878/Shard

    Custom ESP32-S3 development board.

    54 parts2MIT
  • 2 layers72.4 × 185.2 mmBreadShield, the printed circuit board in 3D

    BreadShield

    forrestbao/BreadShield

    The Arduino shield for breadboards

    5 parts2CC-BY-SA-4.0
  • 2 layers36 × 48.3 mmSA818 BREAKOUT, the printed circuit board in 3D

    SA818 BREAKOUT

    galopago/dil-breakout-pcb

    Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.

    14 parts2MIT
  • 4 layers92 × 99.5 mmGranit, the printed circuit board in 3D

    Granit

    laenzlinger/granit

    Custom carrier board for Raspberry Pi CM4/CM5 — minimal offsite backup appliance with JMS578 USB-to-SATA bridge

    120 parts2CERN-OHL-P-2.0
  • 2 layers94 × 72 mmThermostat, the printed circuit board in 3D

    Thermostat

    mbtown01/frosti

    "Financially Reactive Open Source Thermostat Initiative" (FROSTI), a RaspberryPi-based hardware+software solution

    65 parts2
  • 4 layers100 × 79 mmMobo, the printed circuit board in 3D

    Mobo

    ndr-lmnc/regolo

    REGOLO an open source 10-channel USB control surface designed for software-based audio volume control.

    134 parts2CERN-OHL-S-2.0
  • 2 layers49.4 × 43.7 mmChaos papagali, the printed circuit board in 3D

    Chaos papagali

    Pakequis/Chaos_papagali

    A annoying device that imitates the vibration of a phone

    41 parts2MIT
  • 6 layers268 × 230 mmRf board, the printed circuit board in 3D

    Rf board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    357 parts2CERN-OHL-S-2.0
  • 4 layers70.5 × 128.5 mmPulsephone main board, the printed circuit board in 3D

    Pulsephone main board

    pulseopen/PulsePhone

    An almost fully modular open source phone running off of the DART-MX8M-MINI SoM.

    94 parts2GPL-3.0
  • 2 layers70 × 60 mmAgentping carrier, the printed circuit board in 3D

    Agentping carrier

    rwrife/AgentPing

    Physical desk-side inbox and response surface for AI coding agents using a Windows/.NET bridge and ESP32-C6 AMOLED touch display.

    29 parts2MIT
  • 2 layers26 × 40 mmNervous ECG, the printed circuit board in 3D

    Nervous ECG

    sensors-inl/Nervous-ECG

    ECAD design files, firmware source code and standalone application for the ECG sensor of the Nervous project.

    65 parts2MIT
  • 2 layers52 × 30 mmCoppertone buffer, the printed circuit board in 3D

    Coppertone buffer

    seunghyukchoe/copper-mcp

    Local-first PCB automation for KiCad with safe MCP tools and deterministic autorouting research.

    26 parts2Apache-2.0
  • 2 layers89.2 × 87.9 mmWheelOfJoy, the printed circuit board in 3D

    WheelOfJoy

    SukkoPera/WheelOfJoy

    8-player joystick adapter for the Commodore 16, 116 and Plus/4

    39 parts2
  • 2 layers47.8 × 45.4 mmWheelOfJoy, the printed circuit board in 3D

    WheelOfJoy

    SukkoPera/WheelOfJoyMini

    4-player joystick adapter for the Commodore 16, 116 and Plus/4 with 2-button support

    26 parts2
  • 4 layers48.9 × 49.8 mmFC REV2, the printed circuit board in 3D

    FC REV2

    xXsenseiXx/KHATAF-F411

    Open-hardware 4-layer STM32F411 drone flight controller designed in KiCad for INAV and Betaflight.

    73 parts2
  • 2 layers80.3 × 155 mmUnitron, the printed circuit board in 3D

    Unitron

    alustig3/unitron

    Kitchen tool for working with important cooking units

    83 parts1CERN-OHL-P-2.0
  • 2 layers97.8 × 35.6 mmQl flex, the printed circuit board in 3D

    Ql flex

    arleybls/ql-flex-memory

    512kB external RAM expansion board for the Sinclair QL, with SuperBASIC/68008 RAM test software (KiCad, CERN-OHL-S v2)

    16 parts1CERN-OHL-S-2.0
  • 2 layers27.2 × 36 mmPicoloader, the printed circuit board in 3D

    Picoloader

    Auroxin/picoloader-hw

    Open-hardware PicoLoader for the Nintendo GameCube: a solderless RP2040 modchip. KiCad 10 sources for the v1.1A (2 MB) and v1.2A (16 MB) boards, the 30-pin flex PCB and the 3D-printed mounting parts. GPL-2.0.

    37 parts1GPL-2.0
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers161.8 × 100 mmEinstein boltzmann, the printed circuit board in 3D

    Einstein boltzmann

    CarlosCraveiro/einstein-boltzmann

    Remake of the board of the 5-th EPO (2017), using KiCAD 7.0, to measure the Boltzmann constant through the analysis of the thermal noise of a resistor.

    63 parts1CERN-OHL-S-2.0