
Ms88sf2-breakout
galopago/dil-breakout-pcb
Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.

Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.
SA818 BREAKOUT is an open-source printed circuit board by galopago, from the galopago/dil-breakout-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 36 × 48.3 mm with 14 parts on 24 nets, routed with 166 tracks and 57 vias.
Its parts include 4 connectors, 3 capacitors, 3 resistors, 2 inductors and 1 IC. It belongs with the radio and wireless and interfaces and adapters boards of this library.
This board allows RAK Wireless 3172 modules to be used on breadboard for prototyping. Open source and manufacturing files available. The main features are:

The PCB was developed in KiCad V5.1,
Pitch compatible with solderless breadboard

Space saver option when enclosure's height allows it
| FRONT | SIDE | UPPER |
|---|---|---|
![]() | ![]() | ![]() |
Space saver option for batteries or additional electronics. Uses long pin headers with spacers to reach the maximun allowable height
| SIDE | RISED |
|---|---|
![]() | ![]() |
| SINGLE | PANEL |
|---|---|
![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 2 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3, J4 |
| 2 | L | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 1 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Conn_02x09_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Horizontal | J2 |
| 1 | SA818 | NICERF:SA818 | U1 |
The 13 most common of 14 parts.

galopago/dil-breakout-pcb
Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.

galopago/dil-breakout-pcb
Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.

galopago/dil-breakout-pcb
Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 36 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the galopago/dil-breakout-pcb repository on GitHub, at the commit this page was made from: the board is sa818/SA818_BREAKOUT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).