Skip to the content

Open hardware

629 boards

KiCad boards from 316 GitHub repositories tagged “open-hardware”, the most starred first; open any of them in PCBKit.

  • 2 layers70.7 × 70.7 mmWhistler mic array, the printed circuit board in 3D

    Whistler mic array

    ccc909/Whistler

    Open-source 16-channel USB MEMS microphone array: KiCad PCB design, XMOS XU316 (xcore.ai) USB Audio Class 2 firmware with DFU, BOM and JLCPCB-ready production files. CERN-OHL-S.

    96 parts1CERN-OHL-S-2.0
  • 2 layers68.6 × 53.3 mmModbusRTU Test Shield, the printed circuit board in 3D

    ModbusRTU Test Shield

    CMB27/ModbusRTU-Test-Shield

    A shield for Arduino boards that provides an RS-485 transceiver, RS-232 transceiver, and a selection of buttons, lights, and knobs.

    46 parts1CERN-OHL-P-2.0
  • 2 layers151.2 × 89.3 mmLoadShed, the printed circuit board in 3D

    LoadShed

    DJM0/LoadShed

    Off-grid 4-channel PWM load controller with regulated 12 V output from any 12–32 V battery. Sunrise/sunset + RTC scheduling, LiFePO₄ battery protection, dimming pots and an OLED. ATtiny3216 firmware + KiCad hardware.

    94 parts1MIT
  • 4 layers116.6 × 55.6 mmECG Learning Board, the printed circuit board in 3D

    ECG Learning Board

    emptydave/ecg_teaching_board

    Educational bio-signal acquisition board for teaching electrophysiology

    97 parts1CERN-OHL-W-2.0
  • 2 layers76.6 × 79.4 mmEIT Multiplexer, the printed circuit board in 3D

    EIT Multiplexer

    ErenErenel/EIT-Multiplexer-PCB

    EE499 Capstone — Low-power 16-channel analog multiplexer PCB for Electrical Impedance Tomography (EIT). RP2040 + ADG1606, KiCad design files.

    62 parts1
  • 2 layers348.5 × 142.5 mmKeeb, the printed circuit board in 3D

    Keeb

    FabioCanavarro/MochaDeck

    Full hardware design files for a custom mechanical keyboard. Contains the KiCad schematics, BOMs, and 3D .step files.

    165 parts1
  • 2 layers60.5 × 91.5 mmKicad sailframes e1, the printed circuit board in 3D

    Kicad sailframes e1

    FForzano/xgsail-e1

    Open-hardware ESP32 sailing tracker (E1): GNSS/IMU/wind/pressure logging, ESP-NOW mesh for live fleet position + race-start detection, BLE/WiFi upload. Firmware, KiCad PCB, and a published TypeScript client SDK.

    21 parts1Apache-2.0
  • 2 layers100 × 52.5 mmMk 52 keyboard, the printed circuit board in 3D

    Mk 52 keyboard

    Fyfar/mk_52_keyboard

    KiCAD keyboard layout for MK-52 soviet calculator

    33 parts1CERN-OHL-P-2.0
  • 2 layers43.8 × 21 mm036INCH 5DIGIT, the printed circuit board in 3D

    036INCH 5DIGIT

    galopago/panel-mount-7-segment-display

    Open source 7 segment serially controlled led display that fits inside a generic 45x26mm panel mount plastic enclosure. Upgrade your function specific panel meter PCB with a new one controllable by your preferred MCU.

    10 parts1MIT
  • 2 layers75 × 49 mmRak811-lora adaptable node, the printed circuit board in 3D

    Rak811-lora adaptable node

    galopago/rak811-lora-adaptable-node

    RAK811 based LoRa node, with multiple expansion possibilities and designed to fit inside a generic 83x58x33mm waterproof enclosure box.

    23 parts1CC-BY-4.0
  • 2 layers75 × 49 mmRak4200-lora adaptable node, the printed circuit board in 3D

    Rak4200-lora adaptable node

    galopago/rak4200-lora-adaptable-node

    RAK4200 based LoRa node, with multiple expansion possibilities and designed to fit inside a generic 83x58x33mm waterproof enclosure box.

    19 parts1CC-BY-4.0
  • 8 layers99 × 61 mmBattery management system cell monitoring unit, the printed circuit board in 3D

    Battery management system cell monitoring unit

    gerhardmalberg/bms-cmu-bq79616-hardware

    Open-source 6S–16S battery monitoring hardware based on TI BQ79616-Q1. Includes KiCad designs, manufacturing files, and electrical, thermal and mechanical simulation studies.

    198 parts1CERN-OHL-P-2.0
  • 4 layers92 × 88 mmIOT, the printed circuit board in 3D

    IOT

    Habib-creater/ESP32-IoT-Monitoring-Control-Board

    4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.

    63 parts1
  • 2 layers77.1 × 29.7 mmBuck converter, the printed circuit board in 3D

    Buck converter

    hasanberkdasar/Buck-converter

    XL4015 buck converter prototype: 8–30 V DC input to regulated 5 V USB-A output

    11 parts1MIT
  • 6 layers25.9 × 16.8 mmKnuckle, the printed circuit board in 3D

    Knuckle

    HeyPCB/knuckle

    35 mm round FOC driver for a GBM2804 gimbal motor that answers on the Open Duck Mini's servo bus as an STS3215. 6-layer KiCad 10 board plus printed standoff, cover and horn adapter.

    45 parts1CERN-OHL-S-2.0
  • 2 layers53.9 × 62.6 mmMoon light, the printed circuit board in 3D

    Moon light

    HeyPCB/moon-light

    Luna, the night-light moon: A sleepy moon that turns on at dusk and tucks itself in after you fall asleep. KiCad 10, heypcb.ai merch.

    36 parts1CERN-OHL-S-2.0
  • 4 layers101 × 51.5 mmQuack core, the printed circuit board in 3D

    Quack core

    HeyPCB/quack-core

    Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.

    138 parts1CERN-OHL-S-2.0
  • 2 layers85 × 65 mmFuente regulable, the printed circuit board in 3D

    Fuente regulable

    iowlabs/camara_electroforesis

    Dispositivo para la instrumentación de experimentos de electroforesis. Considera tanto el diseño de un modelo 3D para el tanque, como la electrónica para una fuente generadora de voltaje.

    80 parts1GPL-3.0
  • 4 layers67.3 × 55.2 mmIsno super v1.0, the printed circuit board in 3D

    Isno super v1.0

    Isno-Open/OpenSuperRF

    Design ouvert de la carte radio ISNO Super v1.0 (ESP32-S3, CC1101 433/868) pour firmwares radio comme OpenProfalux. CERN-OHL-S v2.

    101 parts1CERN-OHL-S-2.0
  • 2 layers100 × 65 mmFabric Analyser PCB, the printed circuit board in 3D

    Fabric Analyser PCB

    Jerome-Graves/fabric-analyser

    Automated cross-polarised optical scanner for measuring crystal orientation fabric (COF) in ice-core thin sections: RP2350 firmware, Python control/calibration software, KiCad hardware, and full docs.

    21 parts1MIT
  • 2 layers100 × 65 mmPulse echo azimuthal scanner, the printed circuit board in 3D

    Pulse echo azimuthal scanner

    Jerome-Graves/pulse-echo-azimuthal-scanner

    Single-transducer ultrasonic scanner measuring crystal orientation fabric of ice core disks: hardware, firmware, control software and machine manual

    18 parts1MIT
  • 2 layers85 × 52 mmTusb2036-eval, the printed circuit board in 3D

    Tusb2036-eval

    k0swe/tusb2036-eval

    Eval board for TUSB2036 USB hub controller

    70 parts1CC-BY-4.0
  • 2 layers160.9 × 71.1 mmRc transmitter, the printed circuit board in 3D

    Rc transmitter

    kmezynski/rc_transmitter

    Arduino based RC transmitter with NRF24L01+ module

    30 parts1MIT
  • 4 layers25 × 37.3 mmLinKey, the printed circuit board in 3D

    LinKey

    Konkzor/LinKey

    Une clé WIFI lisant la sortie TIC du Linky connectée au broker MQTT d'un Home Assistant

    42 parts1CERN-OHL-W-2.0