Skip to the content

FPGA

229 boards

KiCad boards from 122 GitHub repositories tagged “fpga”, the most starred first; open any of them in PCBKit.

  • 8 layers217.5 × 187.5 mmBoard c openroute partial, the printed circuit board in 3D

    Board c openroute partial

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    314 parts3
  • 4 layers81.7 × 61 mmPmod interface board, the printed circuit board in 3D

    Pmod interface board

    alpyen/zynq-gbcartreader

    Embedded Software Development project to read & write GameBoy cartridges.

    31 parts3
  • 2 layersSchematics, the printed circuit board in 3D

    Schematics

    jamestiotio/compstruct

    SUTD 2020 50.002 Computation Structures Code Dump

    13 parts3MIT
  • 4 layers129.5 × 115.6 mmPixy-68000, the printed circuit board in 3D

    Pixy-68000

    kekyo/Pixy

    My own Single-Borard-Computer projects.

    94 parts3Apache-2.0
  • 2 layersDisplay and comms, the printed circuit board in 3D

    Display and comms

    LeHack/SPSP

    Particulate matter pollution monitoring system (:poland: System Pomiaru Stężenia Pyłu w powietrzu)

    27 parts3
  • 2 layers74.9 × 110.5 mmWz80-io, the printed circuit board in 3D

    Wz80-io

    makesthingsxyz/wz80

    A z80 based computer.

    22 parts3MIT
  • 2 layers182.9 × 31.7 mmCga2vga, the printed circuit board in 3D

    Cga2vga

    poisk-1/cga2vga

    ПОИСК-1 CGA-to-VGA converter

    20 parts3MIT
  • 2 layers233.5 × 181.5 mmDisplay, the printed circuit board in 3D

    Display

    alpyen/fpga-mediaplayer

    HDL, Hardware & Software Development project to playback a video with sound and learn while doing so.

    774 parts2
  • 4 layers100 × 100 mmAFE, the printed circuit board in 3D

    AFE

    Blaze-Pascal/Masters-Multi-Channel_DAQ

    Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…

    216 parts2GPL-3.0
  • 4 layers60 × 37 mmTdr, the printed circuit board in 3D

    Tdr

    blazra/tdr

    TDR using Lattice ECP5 High Data Rate Transceiver

    144 parts2
  • 4 layers67 × 157 mmICE40hxk4 dev board, the printed circuit board in 3D

    ICE40hxk4 dev board

    smartbench/mainboard

    Smartbench Project - Mainboard (KiCad)

    383 parts2
  • 4 layers183.4 × 143.1 mmMotherboard, the printed circuit board in 3D

    Motherboard

    apistol78/rv32

    Risc-V pipelined CPU and SoC written in SystemVerilog

    126 parts1
  • 2 layers50.8 × 20.3 mmATF150x uDEV, the printed circuit board in 3D

    ATF150x uDEV

    bkw777/ATF150x_uDEV

    Tiny dev board for ATF1502AS(V)(L)-xAx44 and ATF1504AS(V)(L)-xAx44

    14 parts1
  • 4 layers65 × 56.5 mmTangnano9k kr260-hat, the printed circuit board in 3D

    Tangnano9k kr260-hat

    calperxd/tangnano9k-kr260-hat

    FPGA HAT for the AMD Kria KR260 based on the Tang Nano 9K (Gowin GW1NR-9, FT2232H, 16-bit parallel link on J21): KiCad 10 schematic, 4-layer PCB and JLCPCB production files

    181 parts1
  • 2 layers36 × 20.3 mmEeprom, the printed circuit board in 3D

    Eeprom

    fm4dd/pmod-eeprom

    1Mbit I2C EEPROM PMOD

    17 parts1
  • 2 layers41 × 20.3 mmFlash, the printed circuit board in 3D

    Flash

    fm4dd/pmod-flash

    Macronix MX25R6435F SPI Flash PMOD

    15 parts1
  • 2 layers62 × 69 mmFilter, the printed circuit board in 3D

    Filter

    gulotmg/fpga-mcu-dac-adc-conversion-pipeline

    500 kSPS acquisition pipeline: Spartan-7 DDS + DAC7311 + STM32 bare-metal ADC + LabVIEW spectral analysis (IEEE 1241-2023)

    44 parts1MIT
  • 4 layers65 × 48 mmMACHXO2 test, the printed circuit board in 3D

    MACHXO2 test

    jay-waghmare/MachXO2-KiCad-Board

    Custom MachXO2 FPGA Development Board - KiCad Design - Power, Clock, JTAG, LEDs - By Jay Waghmare

    52 parts1MIT
  • 2 layers25.4 × 20.3 mmPmod DA2, the printed circuit board in 3D

    Pmod DA2

    kambadur/Projects

    Everything related to MCUs, FPGAs, C, Verilog, Matlab/Simullink

    7 parts1GPL-3.0
  • 2 layers269.2 × 149.9 mmMainwork, the printed circuit board in 3D

    Mainwork

    MaximSpeczyk/IoT-FPGA

    University Project Teamwork for Advanced Embedded Systems and Hardware Engineering.

    125 parts1
  • 2 layers60.5 × 40.1 mmPROGLOG01, the printed circuit board in 3D

    PROGLOG01

    mlab-modules/PROGLOG01

    Small low-power open-source toolchain compatible FPGA

    66 parts1
  • 2 layersShrikefi werable, the printed circuit board in 3D

    Shrikefi werable

    novafang23/FPGA-Accelerated-Personal-Health-Companion-Edge-Disaster-Monitor

    100% offline, FPGA-accelerated edge disaster monitor & health companion (SIH26181). Features synthesizable Verilog RTL for 20ns PPG timing, ESP32-S3 FreeRTOS firmware, on-device INT8 TinyML triage, and multi-hazard…

    11 parts1MIT
  • 4 layers32 × 66 mmSombrero MSX Goa'uld, the printed circuit board in 3D

    Sombrero MSX Goa'uld

    Papipapito/MSXgoauld_fusion

    Placas MSX Goa'uld SD (Tang Nano 20K) con conector ZIF FFC de 40 vías: en el zócalo del Z80 o por cable con goauldext. Versiones 1.7b, 1.8N y 1.8S. Derivado de jabadiagm (GPL-3.0).

    20 parts1GPL-3.0
  • 2 layers122 × 81 mm8-bit cpu, the printed circuit board in 3D

    8-bit cpu

    Robert-Riordan-UCD/8_Bit_CPU_FPGA

    An 8-bit CPU running on a TangNano 9k FPGA. Written in SystemVerilog and tested with PYUVM.

    20 parts1