

ICE40hxk4 dev board
Smartbench Project - Mainboard (KiCad)
- Size
- 67 × 157 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 383
- Nets
- 303
- Pads
- 1,209
- Tracks, vias
- 4,073, 370
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Mar 2017
- Updated
- 15 Mar 2018
Overview
ICE40hxk4 dev board is an open-source printed circuit board by smartbench, from the smartbench/mainboard repository on GitHub. It is a 4-layer board of 67 × 157 mm with 383 parts on 303 nets, routed with 4,073 tracks and 370 vias.
It is built around the MIC7300YMM, CD4051BM96 and CPC1017N, with the 93LC56BT-I/OT, AS4C1M16S-7TCN and FT2232HL among its other parts. Its parts include 145 resistors, 134 capacitors, 42 connectors, 25 ICs and 23 diodes. It belongs with the computers and single-board computers and sensors and measurement boards and the FPGA and CPLD boards of this library.
Main components
11MIC7300YMM
MSOP-8-40℃~+85℃ 0.25pA 0.5pA 1 1uV/℃ 2.2V~10V 37nV/√Hz@1kHz 500V/ms 85dB 9mV ESD protection Rail-to-Rail Input, Rail-to-Rail Output MSOP-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierCD4051BM96
SOIC-16-150mil-55℃~+125℃ 1 125Ω 20MHz 30pF 3V~20V 60ns 8:1 SOIC-16-150mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersCPC1017N
SOP-4-2.54mm1.2V 1.5kV 100mA 10ms 10ms 16Ω 60V One set normally open: 2A (SPST - normally open) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSLittelfuse/IXYSSolid State Relays (MOS Output)93LC56BT-I/OT
SOT-23-6-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 2MHz 6ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) SPI SOT-23-6 EEPROM ROHSMicrochip TechnologyEEPROMAS4C1M16S-7TCN
TSOP-50-10.0mm0℃~+70℃ 143MHz 16Mbit 3V~3.6V TSOP-50-10.0mm SDRAM ROHSAlliance MemorySDRAMFT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorisedMIC2005A-2YM5-TR
SOT-23-5-40℃~+85℃ 1 170mΩ 2.5V~5.5V 500mA High Side Switch SOT-23-5 Power Distribution Switches ROHSMicrochip TechnologyPower Distribution SwitchesMIC5317-2.5YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 135mV@(150mA) 150mA 2.5V 200uVrms 29uA 6V 80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMIC5355-S4YMME
MSOP-8-EP-40℃~+125℃@(Tj) 1.2V、3.3V 146uVrms 2 350mV@(500mA) 5.5V 500mA 60dB@(1kHz) 70uA Fixed Over Current Protection、Enable、Thermal Shutdown Positive MSOP-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLFSPXO019966
SMD7252-4PSMD7252-4P Crystal Oscillators ROHSIQDCrystal OscillatorsLM4040DYM3-2.5-TR
SOT-23-40℃~+85℃@(Ta) 150ppm/℃ 15mA 2.5V 70uA Fixed Parallel ±1.98% SOT-23 Voltage Reference ROHSMicrochip TechnologyVoltage Reference
Parts
383| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C201, C204, C206, C208, C209, C216, C217, C1002, C1003, C1005, C1006, C1010, C1011, C1018, C1101, C1102 +51 |
| 29 | Testpoint | library:TestPoint | J401, J402, J403, J404, J405, J406, J501, J502, J603, J604, J605, J701, J1001, J1002, J1003, J1004 +13 |
| 27 | 0R | Resistors_SMD:R_0603_HandSoldering | R213, R214, R215, R216, R217, R218, R219, R220, R221, R222, R223, R224, R1002, R1005, R1103, R1104 +11 |
| 21 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C303, C306, C602, C604, C607, C609, C611, C613, C615, C617, C622, C624, C626, C628, C630, C632 +5 |
| 19 | 10K | Resistors_SMD:R_0603_HandSoldering | R101, R201, R207, R209, R210, R301, R302, R303, R304, R305, R1105, R1106, R1107, R1108, R1109, R1110 +3 |
| 19 | 1K | Resistors_SMD:R_0603_HandSoldering | R212, R309, R310, R311, R312, R313, R314, R315, R316, R317, R318, R319, R320, R321, R1115, R1118 +3 |
| 16 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C302, C304, C315, C317, C907, C1001, C1004, C1007, C1008, C1009, C1012, C1013, C1014, C1015, C1016, C1017 |
| 10 | GREEN | LEDs:LED_0603 | D202, D204, D401, D402, D403, D404, D405, D406, D407, D408 |
| 9 | 220R | Resistors_SMD:R_0603_HandSoldering | R811, R812, R815, R817, R818, R820, R1003, R1012, R1013 |
| 8 | 1K8 | Resistors_SMD:R_0603_HandSoldering | R809, R810, R813, R814, R816, R819, R822, R825 |
| 8 | 680R | Resistors_SMD:R_0603_HandSoldering | R401, R402, R403, R404, R405, R406, R407, R408 |
| 8 | Not used | Resistors_SMD:R_0603_HandSoldering | R833, R834, R835, R836, R837, R838, R839, R840 |
| 7 | L_BLM18AG121SN1D | Inductors_SMD:L_0603_HandSoldering | L1001, L1002, L1003, L1004, L1005, L1006, L1007 |
| 6 | 100R | Resistors_SMD:R_0603_HandSoldering | R307, R308, R821, R823, R824, R826 |
| 6 | 470R | Resistors_SMD:R_0603_HandSoldering | R805, R806, R807, R808, R1010, R1011 |
| 6 | 4K7 | Resistors_SMD:R_0603_HandSoldering | R1006, R1007, R1008, R1009, R1113, R1116 |
| 4 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C202, C203, C310, C312 |
| 4 | 10uF | Capacitors_SMD:C_0603_HandSoldering | C610, C620, C901, C902 |
| 4 | 4.7uF | Capacitors_SMD:C_1206_HandSoldering | C205, C207, C213, C215 |
| 4 | CD4051BM96 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U703, U704, U801, U802 |
| 4 | D_Schottky_BAT54S-7-F | TO_SOT_Packages_SMD:SOT-23 | D701, D702, D1006, D1007 |
| 4 | L_BLM18BA750SZ1D | Inductors_SMD:L_0603_HandSoldering | L201, L202, L203, L204 |
| 4 | Let it open | Resistors_SMD:R_0603_HandSoldering | R802, R804, R1101, R1102 |
| 4 | MIC7300 | TO_SOT_Packages_SMD:SOT-23-5 | U1101, U1102, U1105, U1106 |
| 4 | MountingHole | library:MountingHole | J105, J106, J107, J108 |
| 3 | 1K5 | Resistors_SMD:R_0603_HandSoldering | R202, R204, R205 |
| 3 | 2.2uF | Capacitors_SMD:C_0805_HandSoldering | C210, C211, C212 |
| 3 | 2K2 | Resistors_SMD:R_0603_HandSoldering | R208, R829, R832 |
| 3 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch1.27mm | J101, J601, J602 |
| 2 | 1-3pF | Capacitors_THT:CP_Radial_Tantal_D6.0mm_P5.00mm | C704, C707 |
| 2 | 100pF | Capacitors_SMD:C_0603_HandSoldering | C701, C702 |
| 2 | 13K | Resistors_SMD:R_0603_HandSoldering | R701, R705 |
| 2 | 1800pF | Capacitors_SMD:C_0603_HandSoldering | C710, C712 |
| 2 | 180pF | Capacitors_SMD:C_0603_HandSoldering | C709, C711 |
| 2 | 1K2 | Resistors_SMD:R_0603_HandSoldering | R1114, R1117 |
| 2 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C703, C706 |
| 2 | 330R | Resistors_SMD:R_0603_HandSoldering | R1111, R1112 |
| 2 | 47K | Resistors_SMD:R_0603_HandSoldering | R828, R831 |
| 2 | 5-20pF | Capacitors_THT:CP_Radial_Tantal_D6.0mm_P5.00mm | C705, C708 |
| 2 | 50R | Resistors_SMD:R_0805_HandSoldering | R1001, R1004 |
| 2 | 62K | Resistors_SMD:R_0603_HandSoldering | R1121, R1122 |
| 2 | 6K8 | Resistors_SMD:R_0603_HandSoldering | R1119, R1120 |
| 2 | 887K | Resistors_SMD:R_0603_HandSoldering | R702, R706 |
| 2 | 90K9 | Resistors_SMD:R_0603_HandSoldering | R703, R707 |
| 2 | ADC1175 | library:TSSOP-24_4.4x7.8mm_Pitch0.65mm | U1001, U1002 |
| 2 | CONN_COAXIAL | library:BNC_1-1337543-0 | J103, J104 |
| 2 | CPC1017N | library:2.54SOP4 | U701, U702 |
| 2 | D_Schottky_BAT54-7-F | Diodes_SMD:D_SOT-23_ANK | D1004, D1005 |
| 2 | D_Schottky_CDBURT0530LL-HF | Diodes_SMD:D_0603 | D201, D208 |
| 2 | LFSPXO019966 | library:VLGA_4_2.5x2.0mm | Xtal201, Xtal401 |
| 2 | LM4040DYM3-2.5-TR | TO_SOT_Packages_SMD:SOT-23 | D1001, D1003 |
| 2 | MCP4716 | TO_SOT_Packages_SMD:SOT-23-6 | U1103, U1104 |
| 2 | Not used | Capacitors_THT:CP_Radial_Tantal_D6.0mm_P5.00mm | C713, C714 |
| 1 | 12K | Resistors_SMD:R_0603_HandSoldering | R211 |
| 1 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C214 |
| 1 | 93LC56BT-I/OT | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U203 |
| 1 | AS4C1M16S-7TCN | TSOP50-II:TSOP50-II | U501 |
| 1 | CONN_01X25 | Pin_Headers:Pin_Header_Straight_1x25_Pitch1.27mm | J1101 |
| 1 | D_BAS21,215 | Diodes_SMD:D_SOT-23_ANK | D301 |
| 1 | FLASH 2Mb | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U302 |
| 1 | FT2232H | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U205 |
| 1 | Jack Estereo | library:KobiConn_161-3509-E_Jack_3.5mm | J102 |
| 1 | LM2776DBVR | TO_SOT_Packages_SMD:SOT-23-6 | U901 |
| 1 | LM4041EIM3-1.2/NOPB | TO_SOT_Packages_SMD:SOT-23 | D1002 |
| 1 | MIC2005A-2YM5 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U201 |
| 1 | MIC5317-2.5YM5-TR | library:SC-74(5-pins) | U902 |
| 1 | MIC5355-S4YMME | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U204 |
| 1 | RED | LEDs:LED_0603 | D203 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW1101 |
| 1 | TLV3544IPWR | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U803 |
| 1 | TPS72325DBVR | TO_SOT_Packages_SMD:SOT-23-5 | U903 |
| 1 | USB_EXT | library:USB_Micro-B_47642-0001 | J1005 |
| 1 | USB_OTG | library:USB_Micro-B_47642-0001 | J202 |
| 1 | iCE40-HX4K-TQ144 | Housings_QFP:LQFP-144_20x20mm_Pitch0.5mm | U301 |
More from smartbench/mainboard
1- 2 layers36.6 × 44.5 mm

Similar boards
- 4 layers152.9 × 45 mm

Ddr4-spd breakout
antmicro/ddr4-spd-breakout-board
This repository contains open hardware design files for an experimental breakout board which allows reading the Serial Presence Detect (SPD) data from a 288-pin, JEDEC-compliant DDR4 DIMM module.
66 parts4Apache-2.0 - 2 layers142.5 × 72.5 mm

- 2 layers41 × 13 mm

- 4 layers160 × 100 mm

Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
140 parts200 - 4 layers95 × 67 mm

- 4 layers100 × 114.9 mm

- 8 layers50 × 50 mm

- 6 layers100 × 100 mm

Questions
How big is the ICE40hxk4 dev board PCB?
It measures 67 × 157 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ICE40hxk4 dev board use?
383 parts, built around the MIC7300YMM, CD4051BM96, CPC1017N and 93LC56BT-I/OT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ICE40hxk4 dev board KiCad files?
From the smartbench/mainboard repository on GitHub, at the commit this page was made from: the board is iCE40hxk4_dev_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ICE40hxk4 dev board design in my own project?
Its repository states no licence, so its author keeps all rights: ask smartbench before reusing the design.