Oscilloscope

20 boards

KiCad boards from 16 GitHub repositories tagged “oscilloscope”, the most starred first; open any of them in PCBKit.

10 layers224.5 × 160 mm
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
586 parts485MIT
2 layers113 × 62.2 mm
FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0
2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT
2 layers30.4 × 100 mm
Scoppy main
ijnekenamay/Euro_Scoppy
Project to make an Eurorack version of "Scoppy" oscilloscope that works with Raspberry pi pico and Android phone.
40 parts11
4 layers100 × 100 mm
AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0
4 layers67 × 157 mm
ICE40hxk4 dev board
smartbench/mainboard
Smartbench Project - Mainboard (KiCad)
383 parts2
4 layers68.6 × 88.9 mm
Adacus
AoToS/Adacus
Mixed signal PCB with op-amps, filters, ADC/DAC interfaces. ADACUS
115 parts1
2 layers88 × 60 mm
DSO Final
ahmedkamel382/STM32-Oscilloscope
A custom Digital Storage Oscilloscope (DSO) built with an STM32F401 Black Pill and a custom PCB. Features a 1.47" SPI display, an analog front-end with hardware over-voltage protection, and real-time DSP for waveform…
25 parts
2 layers80 × 55 mm
RPI Pico Oscilloscope
Alexou1209/RPI-Pico-oscilloscope-and-logic-analyzer
A pocket sized Oscilloscope and logic Analyzer made using a Raspberry Pi Pico 2 (RP2350) and sigrok-pico firmware
42 parts
4 layers109 × 75.5 mm
Arty scope expansion board
Filip-Kubecki/arty-scope-expansion-board
Two-channel oscilloscope analog front-end shield for Arty A7 (KiCad)
138 parts
2 layers66.5 × 21 mm
Pcb design
harneethnatarajan/diy-oscilloscope
DIY oscilloscope built around an ESP32 (in progress).
18 parts
4 layers83 × 120 mm
Jd2oscope
Niftion/jd2oscope
2CH 1MS/s, 12-Bit, 50kHz Oscope (5V) w/320x240 TFT & ESP32
61 parts
2 layers32 × 47.5 mm
Current Probe
Qeteshpony/Current-Probe
Simple current probe to measure current with an oscilloscope
10 partsBSD-2-Clause
2 layers31.8 × 61.6 mm
Rs423
sambazley/dso475
USB interface for Gould DSO 475 oscilloscope
24 partsZlib
2 layers92 × 118 mm
FullScope
st4rk-7/oscilite
Digital storage oscilloscope on STM32F407 with analog frontend, hardware-timed ADC+DMA, custom UI, and custom PCB shield.
22 parts
2 layers70 × 95.4 mm
Entwurf1
wirthda/usb-oscilloscope
Documentation and Overview over an oscilloscope project based on a STM32-µC.
150 parts
2 layers49.8 × 37.3 mm
Osillyscope-2layer
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
27 parts30MIT
2 layers30.4 × 100 mm
Scoppy control
ijnekenamay/Euro_Scoppy
Project to make an Eurorack version of "Scoppy" oscilloscope that works with Raspberry pi pico and Android phone.
39 parts11
4 layers50 × 26 mm
PSU
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
29 parts2GPL-3.0
2 layers36.6 × 44.5 mm
Analog board
smartbench/mainboard
Smartbench Project - Mainboard (KiCad)
48 parts2