

Analog board
Smartbench Project - Mainboard (KiCad)
- Size
- 36.6 × 44.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 35
- Pads
- 139
- Tracks, vias
- 388, 5
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 30 Mar 2017
- Updated
- 15 Mar 2018
Overview
Analog board is an open-source printed circuit board by smartbench, from the smartbench/mainboard repository on GitHub. It is a 2-layer board of 36.6 × 44.5 mm with 48 parts on 35 nets, routed with 388 tracks and 5 vias.
It is built around the TLV3544ID, CPC1017N and MAX4522CSE+, with the BLM18AG121SN1D among its other parts. Its parts include 15 resistors, 14 capacitors, 11 connectors, 6 ICs and 2 inductors. It belongs with the computers and single-board computers and sensors and measurement boards and the FPGA and CPLD boards of this library.
Main components
4TLV3544ID
SOIC-14-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 100mA 150V/us 1pA 2.5V~5.5V 200MHz 2mV 3pA 4 4.5uV/℃ 5.2mA 7.5nV/√Hz@1MHz 80dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierCPC1017N
SOP-4-2.54mm1.2V 1.5kV 100mA 10ms 10ms 16Ω 60V One set normally open: 2A (SPST - normally open) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSLittelfuse/IXYSSolid State Relays (MOS Output)MAX4522CSE+
SOIC-16-6V~-2V、2V~12V、2V~6V 0℃~+70℃ 15ns 1:1 4 45ns 5pF 65Ω SOIC-16 Analog Switches, Multiplexers ROHSMaxim Integrated (Analog Devices)Analog Switches, MultiplexersBLM18AG121SN1D
UncategorisedUnknown maker
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J102, J103, J104, J105, J106, J107, J108, J109, J110 |
| 5 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C101, C105, C106, C107, C108 |
| 4 | 10pF | Capacitors_SMD:C_0603_HandSoldering | C111, C112, C113, C114 |
| 4 | 1K | Resistors_SMD:R_0603_HandSoldering | R102, R109, R110, R113 |
| 4 | 2K2 | Resistors_SMD:R_0603_HandSoldering | R101, R107, R111, R114 |
| 4 | CPC1017N | library:2.54SOP4 | U103, U104, U105, U106 |
| 3 | 4K7 | Resistors_SMD:R_0603_HandSoldering | R103, R108, R112 |
| 2 | BLM18AG121SN1D | Capacitors_SMD:C_0603_HandSoldering | L101, L102 |
| 2 | 10K | Resistors_SMD:R_0603_HandSoldering | R106, R115 |
| 2 | 10uF 10V Tantalum | Capacitors_SMD:C_1206_HandSoldering | C109, C110 |
| 2 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J101, J111 |
| 1 | 1800pF | Capacitors_SMD:C_0603_HandSoldering | C104 |
| 1 | 180pF | Capacitors_SMD:C_0603_HandSoldering | C103 |
| 1 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C102 |
| 1 | 887K | Resistors_SMD:R_0603_HandSoldering | R104 |
| 1 | 90K9 | Resistors_SMD:R_0603_HandSoldering | R105 |
| 1 | MAX4522CSE+ | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U101 |
| 1 | TLV3544 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U102 |
More from smartbench/mainboard
1- 4 layers67 × 157 mm

Similar boards
- 4 layers84.5 × 129.5 mm

- 6 layers147 × 90 mm

- 4 layers86.4 × 68.6 mm

- 2 layers90 × 95 mm

Xt60 parallelizer
limpkin/xt60_parallelizer
a custom board to monitor custom battery packs
57 parts16MIT - 2 layers161.3 × 88.5 mm

- 2 layers

GCAN gauge
willemcvu/gCAN-gauge
An open-source ESP32-based programmable digital gauge targeted at EV conversions
49 parts4MIT - 4 layers100 × 100 mm

AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0 - 6 layers56.7 × 54.7 mm

Better md80
darshp848/bldc-controller-60v
60 V, 20 A / 80 A peak BLDC motor controller that fits the MD80 v3.0 mounting. KiCad 10, 6 layers.
144 parts1
Questions
How big is the Analog board PCB?
It measures 36.6 × 44.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Analog board use?
48 parts, built around the TLV3544ID, CPC1017N, MAX4522CSE+ and BLM18AG121SN1D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Analog board KiCad files?
From the smartbench/mainboard repository on GitHub, at the commit this page was made from: the board is nueva_etapa_analogica/analog_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Analog board design in my own project?
Its repository states no licence, so its author keeps all rights: ask smartbench before reusing the design.