Skip to the content
12

BLM18AG121SN1D

Unknown maker

Part id
unknown/BLM18AG121SN1D
Category
Uncategorised
Pins
2
Used on
24 open-source boards

Overview

The BLM18AG121SN1D is an uncategorised made by Unknown maker with 2 pins.

PCBKit's library has its KiCad symbol (OPL_Filters_and_Magnetic_Beads:SMD-FERRITE-CHIP-120-OHM-500MA_0603_, from Seeed-opl-kicad) and its footprint (OPL_Inductor:L0603, from Eagle libraries), ready for a KiCad board. 24 open-source boards in 19 repositories on GitHub use it.

Symbol

OPL_Filters_and_Magnetic_Beads:SMD-FERRITE-CHIP-120-OHM-500MA_0603_From Seeed-opl-kicad

Footprint

12
OPL_Inductor:L0603From Eagle libraries

Pinout

2
The pins of the BLM18AG121SN1D
PinNameType
11Passive
22Passive

Open-source boards using it

24See all 24
  • 4 layers35.1 × 76.3 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    New-England-Weather-Balloon-Society/Tiny4FSK

    Horus Binary v2 HAB Tracker

    90 parts96CERN-OHL-W-2.0
  • 4 layers42 × 83.9 mmStratoSoar MK2.2, the printed circuit board in 3D

    StratoSoar MK2.2

    crnicholson/StratoSoar-MK2

    StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.

    116 parts24
  • 4 layers144 × 127 mmFrothfet, the printed circuit board in 3D

    Frothfet

    hoeken/frothfet

    Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

    394 parts14GPL-3.0
  • 8 layers110 × 181.8 mmZest, the printed circuit board in 3D

    Zest

    BerkeleyLab/Zest

    Zest is a FMC mezzanine board with 8 ADC channels and 2 DACs

    441 parts12
  • 4 layers144 × 150 mmKepler x, the printed circuit board in 3D

    Kepler x

    kunichiko/X68k-KeplerX-PCB

    186 parts4MIT
  • 4 layers160.7 × 51.7 mmSendit, the printed circuit board in 3D

    Sendit

    hoeken/sendit

    ESP32 based ADC Input Multitool

    228 parts2GPL-3.0
  • 6 layers22 × 80 mmM2SmartHome, the printed circuit board in 3D

    M2SmartHome

    lukasznowarkiewicz/M2SmartHome

    Setting up a smart home hub, such as running Home Assistant, often requires hardware with sufficient performance and connectivity options.

    257 parts2
  • 6 layers84 × 69 mmClk input fmc, the printed circuit board in 3D

    Clk input fmc

    osprey-dcs/clk-input-fmc

    Clock Input FMC board design

    164 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BLM18AG121SN1D?

Yes. The symbol is OPL_Filters_and_Magnetic_Beads:SMD-FERRITE-CHIP-120-OHM-500MA_0603_ and the footprint OPL_Inductor:L0603, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the BLM18AG121SN1D?

Parts like it in the library: the CC0603JRNPO9BN100 by Unknown maker, the CC0603JRNPO9BN120 by Unknown maker, the CC0603JRNPO9BN220 by Unknown maker and the CC0603JRNPO9BN270 by Unknown maker. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BLM18AG121SN1D?

24 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.