

Clk input fmc
Clock Input FMC board design
- Size
- 84 × 69 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 164
- Nets
- 340
- Pads
- 1,004
- Tracks, vias
- 1,452, 348
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Sep 2025
- Updated
- 6 Aug 2026
Overview
Clk input fmc is an open-source printed circuit board by osprey-dcs, from the osprey-dcs/clk-input-fmc repository on GitHub. It is a 6-layer board of 84 × 69 mm with 164 parts on 340 nets, routed with 1,452 tracks and 348 vias.
It is built around the ADL5501AKSZ-R7, TCP-2-33W+ and SN74LVC16244ADGG, with the ADS7253IPW, AT24C64D-SSHM-T and MMCX-J-P-H-ST-TH1 among its other parts. Its parts include 49 resistors, 40 capacitors, 19 connectors, 9 ICs and 6 inductors. It belongs with the lEDs and displays boards of this library.
Main components
12ADL5501AKSZ-R7
SC-70-6-18dBm~6dBm -40℃~+85℃ 1.1mA 2.7V~5.5V 50MHz~6GHz ±1dB SC-70-6 RF Detectors ROHSAnalog DevicesRF DetectorsTCP-2-33W+
SMD-6P-40℃~+85℃ 0.06dB 0.7deg 1.3dB 1.65mm 2 way 30dB 4.06mm 4.83mm 50MHz~3GHz SMD-6P RF Power Splitters / Combiners ROHSMini-CircuitsRF Power Splitters / CombinersSN74LVC16244ADGG
TSSOP-48-6.1mm-40℃~+125℃ 1.65V~3.6V 20uA 24mA 24mA 4 4 4.1ns@3.3V,50pF 74LVC Tri-State Unidirectional TSSOP-48-6.1mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversADS7253IPW
TSSOP-16-40℃~+125℃ 12 1LSB 1MHz 2 4.5V~5.5V SPI Simultaneous sampling TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)AT24C64D-SSHM-T
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMMMCX-J-P-H-ST-TH1
插件1 50Ω 6GHz Bent tip MMCX 插件 Coaxial Connectors (RF) ROHSSamtecCoaxial Connectors (RF)TNPW120650R0BEEN
1206UncategorisedVishay IntertechnologyBLM18AG121SN1D
UncategorisedUnknown makerAPT1608CGCK
0603-40℃~+85℃ 120° 2.5V 20mA 50mcd 570nm 574nm 75mW Discrete Diode Emerald Green Water Clear 0603 LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteGRM1555CYA103GE01D
040210nF 35V C0G ±2% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTESR03EZPF1001
0603-55℃~+155℃ 150V 1kΩ 250mW Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSROHM SemiconductorChip Resistor - Surface MountRC0603FR-07100KL
UncategorisedUnknown maker
README
README.mdRF Input FMC
A single width HPC FMC board which brings in two 50MHz- 3000Mhz clocks to to MGT capable pins when matched with the LBL Marble FMC carrier.
This design is Open Hardware created by Osprey DCS and published under the terms of the CERN Open Hardware Licence Version 2 - Strongly Reciprocal license.
This repository contains KiCad 9 design files.
Block Diagram
Status
Version 1.0 produced and tested.
)
Parts
164| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | MMCX | Connector_Coaxial:MMCX_Molex_73415-1471_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J10, J11, J12, J13, J14, J15, J16, J20 +1 |
| 16 | 50R | Resistor_SMD:R_1206_3216Metric | R9, R35, R36, R37, R38, R39, R40, R41, R42, R43, R44, R45, R46, R47, R48, R49 |
| 13 | 100nF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C17, C18, C23, C28, C29, C32, C39 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22, C25, C26, C27, C30, C31, C38 |
| 8 | 4.75k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R14, R15, R26, R27, R29 |
| 6 | 1nF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C6, C9, C10 |
| 5 | 0603 | Inductor_SMD:L_0603_1608Metric | L1, L2, L4, L5, L6 |
| 5 | Green | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C7, C8 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R31 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R30, R32, R33 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C34, C35, C40 |
| 3 | 49.9R | Resistor_SMD:R_0402_1005Metric | R24, R25, R28 |
| 3 | FDN335N | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | Keystone5000 | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP2, TP3, TP4 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 100R | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 100R | Resistor_SMD:R_Array_Convex_8x0602 | RN3, RN4 |
| 2 | 100k | Resistor_SMD:R_Array_Convex_8x0602 | RN1, RN2 |
| 2 | 11.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 15nF | Capacitor_SMD:C_0603_1608Metric | C36, C37 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C19, C33 |
| 2 | 24.9R | Resistor_SMD:R_0402_1005Metric | R22, R23 |
| 2 | 3.65k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | 475R | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | ADL5501 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2, U4 |
| 2 | MountingHole | clk-input-fmc:MountingHole_3.0mm_3.8mm_Pad_3.3mm_UniversalMarbleSlot | H3, H4 |
| 2 | MountingHole | clk-input-fmc:MountingHole_3.0mm_M2.5_Pad_3.3mm_UniversalMarbleSlot | H1, H2 |
| 2 | SMA | clk-input-fmc:SMA_Amphenol_901-144_Vertical | CLK1, CLK2 |
| 2 | TCM2-43X+ | clk-input-fmc:Mini-Circuits_DB1627 | T1, T2 |
| 2 | TCP-2-33W+ | clk-input-fmc:Mini-Circuits_DB1627 | U1, U3 |
| 1 | 0+ | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP5 |
| 1 | 0- | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP6 |
| 1 | 0805 | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 11.5k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 12+ | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP11 |
| 1 | 12- | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP12 |
| 1 | 4+ | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP7 |
| 1 | 4- | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP8 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 8+ | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP9 |
| 1 | 8- | clk-input-fmc:TestPoint_Pad_0.14mmx0.5mm | TP10 |
| 1 | 8.2k | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | ADC_CLK | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | ADC_CS | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | ADC_DIN | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | ADC_DOUTA | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | ADC_DOUTB | TestPoint:TestPoint_Pad_D1.0mm | TP20 |
| 1 | ADS7253 | clk-input-fmc:Texas_RTE0016D_WQFN-16-1EP_3x3mm_P0.5mm_EP0.8x0.8mm_ThermalVias | U7 |
| 1 | ASP-134488-01 | Connector_Samtec:Samtec_FMC_ASP-134602-01_10x40_P1.27mm_Vertical | P1 |
| 1 | AT24C64D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | Keystone5001 | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | LMK01801 | clk-input-fmc:Texas_RGZ0048A_VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias | U5 |
| 1 | LMK_CLK | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | LMK_DATA | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | LMK_LE | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | Osprey Logo | clk-input-fmc:Logo_2X | Logo1 |
| 1 | SN74LVC16244A-EP | Package_SO:TSSOP-48_6.1x12.5mm_P0.5mm | U8 |
| 1 | TPS7B92050DBVR | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | WP Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19 |
Similar boards
- 8 layers110 × 181.8 mm

- 6 layers254 × 130 mm

- 4 layers35 × 30 mm

- 6 layers228.6 × 110.7 mm

Driver
thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules
690 parts4MIT - 6 layers90.2 × 95.9 mm

- 4 layers49 × 80 mm

70MHz Soil Sensor
jhns-de/70MHz-Soil-Sensor
Soil moisture and electrical conductivity (EC) sensor based on 70 MHz impedance measurement, developed as part of my master’s thesis.
130 parts2 - 6 layers139.7 × 88.9 mm

- 2 layers62 × 69.1 mm

Questions
How big is the Clk input fmc PCB?
It measures 84 × 69 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Clk input fmc use?
164 parts, built around the ADL5501AKSZ-R7, TCP-2-33W+, SN74LVC16244ADGG and ADS7253IPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clk input fmc KiCad files?
From the osprey-dcs/clk-input-fmc repository on GitHub, at the commit this page was made from: the board is clk-input-fmc.kicad_pcb and its schematic adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clk input fmc design in my own project?
Its repository states no licence, so its author keeps all rights: ask osprey-dcs before reusing the design.