Skip to the content

ESP32

1,360 boards

KiCad boards from 647 GitHub repositories tagged “esp32”, the most starred first; open any of them in PCBKit.

  • 2 layers76 × 53 mmEsp32cam, the printed circuit board in 3D

    Esp32cam

    alex-p30/ESP32-CAM-Carrier-Board

    Carrier board for the ESP32-CAM by AI-Thinker

    20 parts
  • 2 layers84 × 84.5 mmRainGauge ST Morpho Shield V1.2, the printed circuit board in 3D

    RainGauge ST Morpho Shield V1.2

    alexandreberg/SAPI_an_open_source_FEWS

    Open-source flood early warning system: LoRa water-level and rain stations, gateway, web dashboard and LightGBM/MLR forecasts. Master's dissertation (IFSC, Brazil).

    59 partsAGPL-3.0
  • 2 layers117.3 × 63 mmEmbeddster, the printed circuit board in 3D

    Embeddster

    alheir/embeddster

    Embeddster is a platform for the 25.27 - Sistemas Embebidos course at ITBA (Instituto Tecnológico de Buenos Aires), using an ESP32 to test and assist with TPs.

    36 partsMIT
  • 4 layers45 × 45 mmESP32-S3-SMALL, the printed circuit board in 3D

    ESP32-S3-SMALL

    AMIFEX-IT/ESP32-S3-SMALL

    Custom ESP32-S3 development board designed in KiCad, featuring the ESP32-S3-WROOM-1-N8R8 module, custom schematic, PCB layout, and supporting hardware design files

    33 partsMIT
  • 2 layers70.8 × 60.7 mmCar, the printed circuit board in 3D

    Car

    AndreHatu/MarioKart

    Senior Design Project using ESP32s to remake Mario Kart with RC Cars

    44 partsMIT
  • 2 layers33 × 33.7 mmKiCAD ESP32 Sensor, the printed circuit board in 3D

    KiCAD ESP32 Sensor

    AndrewMinWu/Laptop-Slouching-Monitor

    Custom ESP32 PCB using a Time-of-Flight (ToF) sensor to accurately monitor distance from a laptop screen. Used to trigger a desktop popup whenever someone slouches.

    23 parts
  • 2 layers36.6 × 35.1 mmMDD ESP32, the printed circuit board in 3D

    MDD ESP32

    anseljh/MDD

    Tiny smart device to deter rodents with an ultraviolet LED that turns on at night

    10 parts
  • 2 layers60 × 40.1 mmPhoto table, the printed circuit board in 3D

    Photo table

    art-of-electronics/photo_table

    Hardware driver for photo table

    19 partsGPL-3.0
  • 2 layers124 × 112 mmVentSense Stage2, the printed circuit board in 3D

    VentSense Stage2

    Aryan-swag/VentSense

    VentSense: 2-of-3 gas/temperature/voltage early warning and per-cell isolation for small Li-ion packs. Vishwakarma Awards 2026-27 Stage 2 (VK26-IITH-SE-0279)

    93 parts
  • 4 layers90 × 54.7 mm1st ESP32 Demo project, the printed circuit board in 3D

    1st ESP32 Demo project

    ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB

    ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial

    87 parts
  • 2 layers192 × 264.1 mmSpotify led matrix, the printed circuit board in 3D

    Spotify led matrix

    austindriggs/spotify-led-matrix

    Spotify Album Cover LED Matrix Display

    90 parts
  • 4 layers67 × 25.8 mmWiTooth v1P1, the printed circuit board in 3D

    WiTooth v1P1

    automote/WiTooth

    WiTooth- BLE to Wi-Fi GW based on ESP32 SoC

    76 partsGPL-3.0
  • 2 layers132.5 × 66.5 mmQtkiln, the printed circuit board in 3D

    Qtkiln

    beckdac/qtkiln

    Open source controller for kilns of all sizes with home assisstant integration

    26 partsMIT
  • 4 layers120 × 100 mmNts player, the printed circuit board in 3D

    Nts player

    beeb/nts-player

    Standalone web-radio player

    99 partsApache-2.0
  • 2 layers45.4 × 31.7 mmRs485-lowpower, the printed circuit board in 3D

    Rs485-lowpower

    belenseptian/RS485LP

    RS-485LP is an open-source RS485 converter featuring a custom PCB and optimized PlatformIO firmware. It is designed to minimize power consumption for battery-operated sensors and remote monitoring systems.

    17 partsGPL-3.0
  • 4 layers165.3 × 123.7 mmRX8-7(WithoutOpAmps), the printed circuit board in 3D

    RX8-7(WithoutOpAmps)

    bradport02/RX8-Infotainment_System

    An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.

    392 parts
  • 2 layers85.6 × 54 mmNeuralCard, the printed circuit board in 3D

    NeuralCard

    Brillar0101/NeuralCard

    A credit-card-sized PCB that runs a neural network: ESP32-S3, 6-axis IMU, and 24 LEDs wired as the network itself. Draw a digit in the air and watch the activations light up

    72 partsCERN-OHL-P-2.0
  • 2 layers175 × 45.8 mmNixieclockin12 V2-1, the printed circuit board in 3D

    Nixieclockin12 V2-1

    broedschroed/NixieClockUltra

    ESP32-S3 powered Nixie tube clock with direct-drive IN-12A tubes, web UI, IR remote, and RGB ambient lighting

    169 partsMIT
  • 2 layers50 × 48 mmDled esp32-controller, the printed circuit board in 3D

    Dled esp32-controller

    CalinRadoni/pax-DLED

    Efficiency, hardware control for digital LEDs and Wi-Fi communications - these are just some of the caracteristics of this controller.

    40 partsGPL-3.0
  • 2 layers99 × 93.5 mmEsp32-rfm gateway, the printed circuit board in 3D

    Esp32-rfm gateway

    CalinRadoni/pax-Gateway

    The purpose of this gateway is to either:

    91 partsGPL-3.0
  • 2 layers80 × 130 mmProyectoFinalCarrito2, the printed circuit board in 3D

    ProyectoFinalCarrito2

    Carlos-Santos-prog/rc-car-esp32

    Vehículo RC de combate con seguidor de línea basado en ESP32. Diseño electrónico completo en KiCad 10.

    93 partsMIT
  • 4 layers100 × 50 mmPcm5102a mux board, the printed circuit board in 3D

    Pcm5102a mux board

    cbaurtx/RetroBox

    RetroBox is an internet radio using an ESP32-S3 system on a chip

    86 parts
  • 2 layers98.5 × 47 mmMedivault, the printed circuit board in 3D

    Medivault

    chislonljoseph/Medivault

    ESP32-based smart medicine storage and reminder PCB designed in KiCad 10 with complete manufacturing files and documentation.

    32 parts
  • 4 layersStealTheMoon, the printed circuit board in 3D

    StealTheMoon

    choicebuilds/automatic-storage-unit

    A 1 layer PCB built from scratch within 36 hours in the RoboTechs hackathon using an ESP32, fabricated using the LPKF Protomat and Protolaser.

    22 parts