

ESP32-S3-SMALL
Custom ESP32-S3 development board designed in KiCad, featuring the ESP32-S3-WROOM-1-N8R8 module, custom schematic, PCB layout, and supporting hardware design files
- Size
- 45 × 45 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 44
- Pads
- 142
- Tracks, vias
- 193, 43
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Sep 2026
- Updated
- 10 Sep 2026
Overview
ESP32-S3-SMALL is an open-source printed circuit board by AMIFEX-IT, from the AMIFEX-IT/ESP32-S3-SMALL repository on GitHub, published under the MIT licence. It is a 4-layer board of 45 × 45 mm with 33 parts on 44 nets, routed with 193 tracks and 43 vias.
It is built around the ESP32-S3-WROOM-1-N16, LM1117MP-3.3 and ESD9B3.3ST5G. Its parts include 9 resistors, 6 capacitors, 4 diodes, 4 connectors and 2 ICs. It belongs with the microcontroller boards boards and the ESP32 boards of this library.
Main components
3ESP32-S3-WROOM-1-N16
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsESD9B3.3ST5G
SOD-923(0402)ESD And Surge Protection (TVS/ESD)TECH PUBLIC
README
README.mdESP32-S3-N8R8 Development Board
A custom ESP32-S3 development board designed in KiCad, based on the ESP32-S3-WROOM-1-N8R8 module.
The project includes the complete hardware design workflow, from schematic capture and component selection to PCB layout and fabrication-ready files.
Overview
This project is a custom development board built around the ESP32-S3-WROOM-1-N8R8, providing a flexible platform for embedded systems, IoT, wireless communication, and general-purpose microcontroller applications.
The board was designed from the ground up in KiCad, with emphasis on:
- Clean schematic organization
- Practical PCB layout
- Component accessibility
- Expandability
- Design-for-manufacturing considerations
- Reproducible hardware development
Features
- Microcontroller: ESP32-S3-WROOM-1-N8R8
- MCU Architecture: Xtensa® dual-core 32-bit LX7
- Wireless: 2.4 GHz Wi-Fi and Bluetooth Low Energy
- PCB Design: KiCad
- Custom schematic and PCB layout
- Custom component/library integration
- Designed for embedded and IoT applications
- Fabrication-ready PCB design
Project Structure
ESP32-S3-N8R8-Development-Board/
│
├── hardware/
│ ├── schematic/
│ │ └── ESP32-S3-Board.kicad_sch
│ │
│ ├── pcb/
│ │ └── ESP32-S3-Board.kicad_pcb
│ │
│ ├── libraries/
│ │ └── Morten_library.kicad_sym
│ │
│ └── fabrication/
│ ├── gerbers/
│ ├── drill/
│ └── BOM.csv
│
├── docs/
│ ├── schematic.pdf
│ ├── pcb.pdf
│ └── images/
│
├── 3d/
│ └──File and folder names may differ slightly depending on the final project organization.
Hardware Design
Schematic
The schematic was developed in KiCad and contains the electrical connections required for the ESP32-S3-based development board.
The design includes the ESP32-S3 module together with the supporting circuitry required for reliable operation and external interfacing.
PCB Layout
The PCB was designed in KiCad with consideration for:
- Component placement
- Signal routing
- Power distribution
- Grounding
- Connector accessibility
- Board manufacturability
- Physical component clearances
Main Component
ESP32-S3-WROOM-1-N8R8
The central component of the board is the ESP32-S3-WROOM-1-N8R8 module.
The N8R8 configuration provides:
- 8 MB Quad SPI flash
- 8 MB Octal PSRAM
- Integrated Wi-Fi
- Bluetooth Low Energy
- Dual-core processing
- Extensive GPIO and peripheral interfaces
Design Tools
| Tool | Purpose |
|---|---|
| KiCad | Schematic and PCB design |
| Git | Version control |
| GitHub | Project hosting and collaboration |
Repository Contents
This repository is intended to contain the complete hardware design files required to inspect, modify, and manufacture the board.
Schematic Files
KiCad schematic files containing the complete electrical design.
PCB Files
KiCad PCB layout files containing component placement, routing, board outline, copper layers, and other PCB design information.
Libraries
Custom and third-party KiCad symbol/footprint libraries required by the project.
Fabrication Files
Manufacturing outputs such as Gerber files, drill files, and BOM data can be found in the hardware/fabrication/ directory.
Getting Started
1. Clone the Repository
git clone https://github.com/AMIFEX-IT/ESP32-S3-SMALL.git2. Open the Project
Open the KiCad project file in KiCad.
From there, the schematic and PCB layout can be inspected or modified.
3. Libraries
If KiCad reports missing symbols or footprints, make sure the custom libraries included in the repository are correctly added to the project.
Design Status
Status: Completed
The current repository contains the completed schematic and PCB design.
Future revisions may include:
- Hardware testing
- PCB fabrication
- Bring-up and validation
- Firmware development
- Design revisions based on testing
Applications
This development board can serve as a platform for:
- Internet of Things (IoT)
- Embedded systems
- Wireless communication
- Sensor interfaces
- Automation
- Robotics
- Prototyping
- ESP32-S3 firmware development
Future Improvements
Potential improvements for future revisions include:
- Additional power-management features
- Expanded peripheral interfaces
- Improved connector selection
- Hardware debugging interface
- Additional protection circuitry
- Board revision based on prototype testing
License
This project is provided for educational, development, and hardware-design purposes.
See the LICENSE file for the specific licensing terms.
Author
ICON
Custom ESP32-S3 hardware development project designed using KiCad.
Acknowledgements
- Espressif Systems for the ESP32-S3 platform
- KiCad for the open-source electronic design automation tools
- Morten's Lab for the referenced KiCad component library
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R6, R8, R9 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 2K2 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | ESD9B3.3ST5G | Diode_SMD:D_SOD-923 | D3, D4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | CLV1L-FKB | LED_SMD:LED_Cree-PLCC4_3.2x2.8mm_CCW | D1 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | ESP32-S3-WROOM-1-N16 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Pin 2x3 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | Pin 2x5 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | SW_SPST | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | Screw_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
Similar boards
- 2 layers71 × 47.5 mm

- 4 layers61 × 60.7 mm

ESP32-S3 IOT
dohaahmed2135-oss/kicad-learning-projects
Welcome to my KiCad Learning Projects repository!
42 parts - 2 layers50 × 25 mm

- 4 layers100 × 100 mm

- 2 layers85 × 56 mm

AT01
hshahzada/automated-tourniquet
2023/2024 Capstone Design Project for Biomedical Engineering
72 parts - 4 layers85 × 56 mm

- 2 layers57.8 × 34 mm

DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5 - 2 layers62 × 100 mm

ESP32-S3-HUB75-Driver
wszeto9/ESP32-S3-HUB75-Driver
This board serves as the Matrix Display driver for MIT's 2.007 gameboards in Spring 2024 and Spring 2025. The board can take 4 button inputs, Stemma-QT I2C sensors, and breaks out 8 GPIO pins for future use.
137 parts3MIT
Questions
How big is the ESP32-S3-SMALL PCB?
It measures 45 × 45 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32-S3-SMALL use?
33 parts, built around the ESP32-S3-WROOM-1-N16, LM1117MP-3.3 and ESD9B3.3ST5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-S3-SMALL KiCad files?
From the AMIFEX-IT/ESP32-S3-SMALL repository on GitHub, at the commit this page was made from: the board is ESP32-S3-SMALL.kicad_pcb and its schematic ESP32-S3-SMALL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-S3-SMALL design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).