

IchnaeaV2
2KW Solar Charge Controller w/MPPT
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 444
- Nets
- 209
- Pads
- 1,381
- Tracks, vias
- 2,256, 619
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jan 2024
- Updated
- 12 Mar 2025
Overview
IchnaeaV2 is an open-source printed circuit board by brandonbraun653, from the brandonbraun653/Ichnaea repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 100 mm with 444 parts on 209 nets, routed with 2,256 tracks and 619 vias.
It is built around the RP2040, W25Q32JVZPIQ and 74HC4051PW, with the LM1117MP-3.3, LM1117MP-5.0 and MCAC80N10Y among its other parts. Its parts include 132 resistors, 111 capacitors, 34 transistors, 24 diodes and 15 ICs. It belongs with the RP2040 boards of this library.
Main components
12RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH74HC4051PW
TSSOP-16-40℃~+125℃ 1 12ns 29ns 2V~10V 31ns 5pF 70Ω 8:1 Level shifting TSSOP-16 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, MultiplexersLM1117MP-3.3
SOT-2230℃~+125℃@(Ta) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA 99uVrms Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM1117MP-5.0
SOT-223Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas InstrumentsMCAC80N10Y
DFN5060DFN5060 New Arrivals ROHSMicro Commercial ComponentsUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsESD9B3.3ST5G
SOD-923(0402)ESD And Surge Protection (TVS/ESD)TECH PUBLICESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)PMEG10010ELRX
SOD-123W1 Independent 100V 150nA@100V 1A 50A 770mV@1A SOD-123W Schottky Diodes ROHSNexperiaSchottky DiodesBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsSB10100L
TO-277-55℃~+150℃ 1 Independent 100V 10A 150A 300uA@100V 850mV@10A TO-277 Schottky Diodes ROHSMDDSchottky Diodes
Parts
444| Qty | Value | Footprint | References |
|---|---|---|---|
| 96 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +80 |
| 40 | 10uF-100v | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C4, C11, C13, C17, C19, C25, C31, C35, C37, C41, C42, C43, C44, C45, C46 +24 |
| 34 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R29, R36, R37, R38, R106, R109, R110, R111, R112, R115, R119, R125, R127, R129, R132 +18 |
| 30 | 100nF | Capacitor_SMD:C_0603_1608Metric | C15, C21, C23, C27, C29, C33, C39, C66, C69, C70, C100, C101, C102, C103, C104, C111 +14 |
| 24 | 10uF-25V | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6, C12, C18, C24, C30, C36, C75, C78, C105, C106, C107, C108, C109, C110 +8 |
| 24 | MCAC80N10Y | Mosfets:TRANS_BSC076N06NS3-G | Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q24 +8 |
| 15 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R41, R42, R49, R83, R94, R97, R100, R101, R121, R122, R123, R124, R126, R128 |
| 13 | 100k | Resistor_SMD:R_0603_1608Metric | R60, R87, R88, R91, R93, R107, R108, R113, R114, R116, R117, R118, R120 |
| 12 | 0 | Resistor_SMD:R_0603_1608Metric | R4, R8, R12, R16, R20, R54, R56, R62, R63, R68, R71, R74 |
| 12 | 470nF | Capacitor_SMD:C_0603_1608Metric | C8, C10, C14, C16, C20, C22, C26, C28, C32, C34, C38, C40 |
| 12 | 6.2k | Resistor_SMD:R_0603_1608Metric | R7, R11, R15, R19, R23, R24, R27, R65, R67, R70, R73, R76 |
| 9 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q26, Q28, Q29, Q30, Q31, Q32, Q33, Q34 |
| 9 | ESD9B3.3ST5G | Diode_SMD:D_SOD-923 | D9, D11, D12, D13, D14, D15, D16, D17, D18 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H5, H6, H7, H8 |
| 6 | 4.7uH | Inductors:Bournes_L_PQ2614BLA | L1, L2, L3, L4, L5, L6 |
| 6 | 47k | Resistor_SMD:R_0603_1608Metric | R5, R9, R13, R17, R21, R25 |
| 6 | 6.2k-0.25w | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R10, R14, R18, R22, R26 |
| 6 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D2, D3, D19, D20, D21, D24 |
| 6 | HIP2210 | DFN:TDFN-10-1EP_4x4mm_P0.8mm_EP2.6x3mm | U2, U3, U4, U5, U6, U7 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R48, R51, R85, R95 |
| 4 | 470k | Resistor_SMD:R_0805_2012Metric | R31, R35, R78, R81 |
| 4 | 510 | Resistor_SMD:R_0603_1608Metric | R102, R103, R104, R105 |
| 4 | Screw_Terminal_01x09 | Connectors:CONN_74651195R_WRE | J1, J2, J3, J8 |
| 3 | 47pF | Capacitor_SMD:C_0603_1608Metric | C67, C68, C77 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R90, R92, R131 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric | R53, R55 |
| 2 | 10k-NTC | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | TH1, TH2 |
| 2 | 15k | Resistor_SMD:R_0603_1608Metric | R32, R82 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C49, C52 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R98, R99 |
| 2 | 68k | Resistor_SMD:R_0603_1608Metric | R52, R57 |
| 2 | 787k | Resistor_SMD:R_0805_2012Metric | R33, R39 |
| 2 | 90V-2kA | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | GD1, GD2 |
| 2 | Green LED | LED_SMD:LED_0805_2012Metric | D7, D8 |
| 2 | PMEG10010ELRX | Diode_SMD:D_SOD-123 | D4, D10 |
| 2 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U10, U14 |
| 2 | Yellow LED | LED_SMD:LED_0805_2012Metric | D5, D6 |
| 1 | 0.2m | Resistors:Shunt_5930 | R130 |
| 1 | 1.5mH | Inductor_SMD:L_Changjiang_FNR6045S | L8 |
| 1 | 120k | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 22uH | Inductor_SMD:L_Wuerth_HCI-1040 | L7 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R79 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 510k | Resistor_SMD:R_0603_1608Metric | R58 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R59 |
| 1 | 74HC4051PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U9 |
| 1 | AP66200FVBW-13 | Package_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm | U8 |
| 1 | BMS_Serial | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q27 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_EVQP2 | SW1 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | FanConnector | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J5 |
| 1 | INA180A4 | Package_TO_SOT_SMD:SOT-23-5 | U15 |
| 1 | LM1117MP-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U13 |
| 1 | LM1117MP-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U12 |
| 1 | LTC7871 | Package_QFP:LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U11 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_EVQP2 | SW2 |
| 1 | SB10100L | Package_TO_SOT_SMD:TO-277A | D1 |
| 1 | SMAJ60A | Diode_SMD:D_SMA | D23 |
| 1 | SMAJ90A | Diode_SMD:D_SMA | D22 |
| 1 | SWD Debug | Connectors:JTAG_2x05_P1_27mm_Shrouded_SMD | J4 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | P1 |
More from brandonbraun653/Ichnaea
1- 4 layers96.5 × 96.5 mm

Similar boards
- 6 layers80.9 × 63 mm

- 4 layers100 × 50 mm

Test
aidanbrzezinski/test
. ├─ 3D # STEP 3D model export ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts used in the project │ ├─ scripts # External…
211 partsMIT - 2 layers184 × 67.5 mm

- 4 layers54 × 120 mm

Kartonaut
Jan-Philipp-Munsch/kartonaut
TVC model rocket (after BPS.space Scout F): Teensy 4.1 flight firmware, mainboard spec, project log
174 partsMIT - 4 layers481.3 × 23.7 mm

Faraday rescue bms
nhallsny/faraday-rescue
Open source battery for e-bikes made by the now-defunct Faraday Bicycles
155 parts8CERN-OHL-P-2.0 - 4 layers135 × 70 mm

Bms c1
OpenConverters/Faraday
The living record of ABT #422 (closed 2026-08-01; this file is its successor — update it as boards land). The program: grow the open-source converter corpus, track (a) the derive success rate of the critical-mesh…
210 partsMIT - 4 layers135 × 70 mm

- 4 layers126.6 × 37.7 mm

Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT
Questions
How big is the IchnaeaV2 PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IchnaeaV2 use?
444 parts, built around the RP2040, W25Q32JVZPIQ, 74HC4051PW and LM1117MP-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IchnaeaV2 KiCad files?
From the brandonbraun653/Ichnaea repository on GitHub, at the commit this page was made from: the board is hw/ver2/IchnaeaV2/IchnaeaV2.kicad_pcb and its schematic hw/ver1/PowerStage/IchnaeaV1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IchnaeaV2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).