Skip to the content

ESP32

1,360 boards

KiCad boards from 647 GitHub repositories tagged “esp32”, the most starred first; open any of them in PCBKit.

  • 2 layers10 × 149.9 mmSTOF v3, the printed circuit board in 3D

    STOF v3

    OsamaAlsahli/data-glove

    Low cost 16 IMU data glove with real time hand tracking and fingertip force sensing. BEng final year project

    7 parts
  • 2 layers70 × 30 mmShieldHub, the printed circuit board in 3D

    ShieldHub

    rajtik76/weather-station

    Balcony weather station in Plzeň: an ESP32 measuring temperature, humidity, pressure, noise and light, with a calibrated shade air temperature estimate checked against ČHMÚ Plzeň-Mikulka. Laravel and Livewire dashboard.

    6 parts
  • 2 layersAcelerografo ESP32, the printed circuit board in 3D

    Acelerografo ESP32

    RSA-PPP/ppp-2026-08-acelerografo-esp32-kicad

    Migración, auditoría y optimización de PCB de acelerógrafo ESP32 de Autodesk EAGLE a KiCad 10 con estandarización PCBA.

    9 parts
  • 2 layersModule, the printed circuit board in 3D

    Module

    steand/WeatherStation

    Eigenbau Wetterstation/DIY Weather Station

    14 partsGPL-3.0
  • 2 layersCansat pcb, the printed circuit board in 3D

    Cansat pcb

    TecnoEduHub/CONAE-Cansat-2026

    Competencia CANSAT 2026 organizada por la CONAE donde estudiantes de escuela secundaria tienen como desafío : diseñar y operar un satélite a escala.

    4 partsMIT
  • 4 layersHush main, the printed circuit board in 3D

    Hush main

    Terryzhao-dev/Hush

    Bluetooth dictation mic in an aluminium cup that keeps people nearby from hearing you (ESP32, KiCad, CadQuery)

    57 parts
  • 2 layers20 × 20 mmHush puck, the printed circuit board in 3D

    Hush puck

    Terryzhao-dev/Hush

    Bluetooth dictation mic in an aluminium cup that keeps people nearby from hearing you (ESP32, KiCad, CadQuery)

    10 parts
  • 2 layers31.5 × 31.5 mmSensors, the printed circuit board in 3D

    Sensors

    TheFlocke/rc-buggy

    Autonomous rover with BLE control and robotic arm, built for a DLR high school competition.

    16 partsGPL-3.0
  • 2 layers42 × 52 mmHue simple switch mains, the printed circuit board in 3D

    Hue simple switch mains

    tineira/hue-simple-switch

    Wi-Fi wall switch for Philips Hue on a Seeed XIAO ESP32-C6, wired to a toggle switch or push buttons. Controls the Hue Bridge over its local API (not Zigbee).

    28 partsMIT
  • 2 layers37.9 × 23.6 mmV2-fit, the printed circuit board in 3D

    V2-fit

    tineira/hue-simple-switch

    Wi-Fi wall switch for Philips Hue on a Seeed XIAO ESP32-C6, wired to a toggle switch or push buttons. Controls the Hue Bridge over its local API (not Zigbee).

    24 partsMIT
  • 2 layers70 × 88.9 mmV2-fit panel, the printed circuit board in 3D

    V2-fit panel

    tineira/hue-simple-switch

    Wi-Fi wall switch for Philips Hue on a Seeed XIAO ESP32-C6, wired to a toggle switch or push buttons. Controls the Hue Bridge over its local API (not Zigbee).

    145 partsMIT
  • 2 layers60 × 40 mmPower board, the printed circuit board in 3D

    Power board

    VeeT23/SPECTRAL

    Performance line following robot submitted to Southwork Robotics 2026

    29 partsGPL-3.0
  • 2 layers40 × 18 mmSensor module, the printed circuit board in 3D

    Sensor module

    VeeT23/SPECTRAL

    Performance line following robot submitted to Southwork Robotics 2026

    20 partsGPL-3.0
  • 2 layers94 × 46 mmSamplooler stack bottom, the printed circuit board in 3D

    Samplooler stack bottom

    willbearfruits/samplooler

    A small looper you play by tilting it, and instruments for the same board: ESP32-S3 firmware, circuit boards, a browser flasher and a desktop app

    19 partsGPL-3.0
  • 2 layers94 × 46 mmSamplooler stack top, the printed circuit board in 3D

    Samplooler stack top

    willbearfruits/samplooler

    A small looper you play by tilting it, and instruments for the same board: ESP32-S3 firmware, circuit boards, a browser flasher and a desktop app

    12 partsGPL-3.0