.kicad_pcb.jpg?size=s&soon)
RX8-7(STM CENTRE)
bradport02/RX8-Infotainment_System
An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.

An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.
RX8-7(WithoutOpAmps) is an open-source printed circuit board by bradport02, from the bradport02/RX8-Infotainment_System repository on GitHub. It is a 4-layer board of 165.3 × 123.7 mm with 392 parts on 447 nets, routed with 3,036 tracks and 438 vias.
It is built around the MCP2551-I/SN-HG, NJM4556AM and ESD9B5.0ST5G, with the PTS636 SKG25J SMTR LFS, SMAJ24A and SQJ407EP-T1_GE3 among its other parts. Its parts include 154 resistors, 118 capacitors, 26 diodes, 15 transistors and 9 ICs. It belongs with the interfaces and adapters and computers and single-board computers boards and the ESP32 and STM32 boards of this library.
A full-stack aftermarket infotainment replacement for a Mazda RX-8, developed as a final-year individual engineering project (BEng Electronic Engineering, Royal Holloway University of London — First Class, dissertation graded 81%).
The system replaces the OEM head unit and integrates directly with the car's existing CAN bus, audio amplifiers, climate control unit, and CD changer — most of which use undocumented, proprietary protocols that had to be reverse engineered from scratch. It spans custom four-layer PCB design, embedded firmware, and a full Qt/QML application, and is built and running in the vehicle.

A full build demo is available here.
Three-processor system, each handling a distinct role:
| Processor | Role |
|---|---|
| STM32H750VBT6 | CAN bus gateway, real-time vehicle protocol decoding (CCU, CD changer, OEM audio), RTC/backlight/system control |
| Raspberry Pi 5 | Qt6/QML user interface, Bluetooth (BlueZ/oFono/obexd), audio routing (PipeWire/ALSA), CarPlay integration |
| ESP32-S3 | Peripheral control — ambient lighting, WS2812B driving, secondary CAN interface for bench testing |
All three communicate over a custom 20-byte framed UART/IPC protocol (start-byte delimited, CRC8-checked) running between the Pi, STM32, and ESP32.

CAN bus gateway — FDCAN1/FDCAN2 dual-controller bring-up on the STM32H750, forwarding at ~28 µs measured latency. 18 unique CAN IDs decoded from live RX-8 traffic and mapped to vehicle signals (RPM, speed, steering, warnings).

Reverse-engineered vehicle protocols — the RX-8 uses several undocumented buses with no public documentation:
CCU (climate control unit): 4800 baud, 8E1, inverted UART — full packet structure decoded from oscilloscope captures and re-implemented in firmware.

CD changer: proprietary PWM bus, nibble-based BCD encoding with XOR+1 checksum — decoded and replicated.

OEM audio output stage: characterised the differential amplifier output (NJM4556A, virtual-ground biasing) to interface cleanly with the new head unit.
Custom 4-layer PCB (KiCad, JLCPCB-manufactured) — integrates the STM32H750, CAN transceivers, TDA7719/TDA7388 audio ICs, Si4703 FM tuner, automotive-grade power protection (reverse polarity, TVS clamping, ACC ignition switching), and connectors for all vehicle interfaces.
| Populated (front) | Populated (back) | Final assembly |
|---|---|---|
![]() | ![]() | ![]() |
Qt6/QML application — StackView-based navigation, live CAN data display, climate control, ambient lighting control, Bluetooth calling/audio/contacts (PBAP), CarPlay via Carlinkit, and CD/media playback pages.
Automotive-grade hardware engineering — proper reverse-polarity and TVS protection on all vehicle-facing inputs, differential CAN/USB routing, and debugging of real automotive edge cases (back-feed through body diodes, RTC domain persistence across power cycles, etc.).
├── Application/ # Qt6/QML UI running on the Raspberry Pi 5
├── Embedded Software/ # STM32H750 firmware (CAN gateway, protocol decoders, UART/IPC) + ESP32-S3 firmware
├── PCBs/ # KiCad schematics and 4-layer PCB layout
├── Documents/ # Dissertation, supporting reports, protocol definitions, and photo evidence
└── README.mdEmbedded firmware (C, HAL-style drivers, DMA, interrupt-driven UART), four-layer PCB design and bring-up (KiCad), Qt/QML application development, CAN bus systems (FDCAN, socketcan), reverse engineering of undocumented serial and PWM protocols from oscilloscope/logic analyser captures, automotive electrical design (protection, power architecture), and cross-processor system integration.
Core CAN gateway, protocol decoding, PCB, and primary UI pages (climate, ambient lighting, Bluetooth, CarPlay, CD) are implemented and tested on hardware. See individual folders for current state of any in-progress subsystems.
Bradley Port — Final-year BEng Electronic Engineering, Royal Holloway University of London. LinkedIn · Portfolio [blocked]
| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C100, C102, C107, C110, C111, C112, C118, C120, C130, C208, C209, C211, C212, C213, C225, C227 +28 |
| 41 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R103, R104, R206, R207, R208, R209, R210, R211, R213, R372, R373, R400, R401, R402, R403, R404 +25 |
| 16 | 0R | Resistor_SMD:R_0603_1608Metric | R331, R332, R333, R341, R343, R345, R361, R365, R374, R375, R376, R377, R378, R379, R380, R381 |
| 13 | 1u | Capacitor_SMD:C_0805_2012Metric | C200, C201, C202, C203, C204, C205, C206, C207, C214, C220, C221, C600, C603 |
| 13 | NPN | SOT-23[Corrected]:SOT-23-3(CORRECTED) | Q300, Q301, Q400, Q401, Q402, Q403, Q404, Q500, Q501, Q502, Q503, Q600, Q601 |
| 12 | 4k7 | Resistor_SMD:R_0603_1608Metric | R336, R337, R339, R340, R342, R344, R355, R356, R357, R363, R364, R371 |
| 11 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R367, R368, R406, R407, R410, R411, R412, R503, R514, R517, R608 |
| 11 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D106, D107, D109, D110, D111, D113, D114, D200, D400, D504, D605 |
| 10 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C215, C216, C217, C218, C409, C410, C412, C413, C507, C508 |
| 9 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R507, R520, R606, R607, R611, R612, R700, R703, R704 |
| 8 | 220u | Capacitor_SMD:CP_Elec_6.3x5.3 | C335, C336, C337, C338, C339, C340, C347, C348 |
| 8 | 4R7 | Resistor_SMD:R_0603_1608Metric | R346, R347, R348, R352, R353, R354, R369, R370 |
| 7 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R102, R108, R111, R205, R416, R518, R613 |
| 6 | 10u | Capacitor_SMD:CP_Elec_4x5.4 | C103, C117, C121, C124, C405, C408 |
| 6 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R105, R106, R505, R508, R604, R605 |
| 5 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D502, D503, D600, D601, D602 |
| 4 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R200, R201, R202, R203 |
| 4 | 10u | Inductor_SMD:L_Bourns_SRP5030T | L200, L201, L202, L203 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C108, C109, C503, C518 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R349, R350, R351, R366 |
| 4 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C400, C401, C701, C702 |
| 4 | 27k | Resistor_SMD:R_0603_1608Metric | R334, R335, R338, R362 |
| 4 | 4k3 | Resistor_SMD:R_0603_1608Metric | R328, R329, R330, R360 |
| 4 | 4u7 | Capacitor_SMD:CP_Elec_5x4.5 | C332, C333, C334, C346 |
| 4 | NJM4556A | Package_SO:SSOP-8_3.9x5.05mm_P1.27mm | U304, U305, U306, U307 |
| 3 | 120R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R701, R705, R706 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric | R107, R112, R121 |
| 3 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U700, U702, U703 |
| 3 | NA | Capacitor_SMD:C_0603_1608Metric | C402, C403, L400 |
| 3 | PTS636SKG25JSMTR_LFS | PTS636SKG25JSMTR_LFS:PTS636SKG25JSMTRLFS | SW500, SW600, SW601 |
| 3 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J100, J502, J601 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R113, R204 |
| 2 | 10k | Resistor_SMD:R_1210_3225Metric | R100, R101 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C219, C607 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C106, C114 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C504, C505 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C513, C514 |
| 2 | 1N5402 | Diode_SMD:D_SOD-128 | D101, D103 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R512, R513 |
| 2 | 2K2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R116, R120 |
| 2 | 32.768K | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | X400, X501 |
| 2 | 3k3 | Resistor_SMD:R_0603_1608Metric | R358, R359 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R421, R422 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R212, R603 |
| 2 | 47u | Capacitor_SMD:CP_Elec_6.3x5.9 | C116, C223 |
| 2 | 47u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C122, C123 |
| 2 | D_Zener | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | D100, D104 |
| 2 | FerriteBead | Capacitor_SMD:C_0603_1608Metric | FB100, FB400 |
| 2 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP100, JP101 |
| 2 | LM75B | Package_SO:TSSOP-8_3x3mm_P0.65mm | U704, U705 |
| 2 | SMAJ24A | Diode_SMD:D_SMA | D102, D500 |
| 2 | SQJ407EP-T1_GE3 | SQJ407EP-T1_GE3:PowerPAK-SO-8L_Option-2_VIS | Q101, Q102 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP500, TP501 |
| 1 | 1.5KExxA | Diode_THT:D_DO-201AE_P15.24mm_Horizontal | D108 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C343 |
| 1 | 100u | Capacitor_SMD:CP_Elec_10x10 | C115 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R708 |
| 1 | 10u | Capacitor_SMD:CP_Elec_8x10.5 | C101 |
| 1 | 10u | Inductor_SMD:L_1210_3225Metric | L401 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C406 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R118 |
| 1 | 1N4001 | Diode_SMD:D_SOD-123 | D505 |
| 1 | 1N4007 | Diode_SMD:D_SMA_Handsoldering | D105 |
| 1 | 1N4007 | Diode_SMD:D_SMA | D112 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R115 |
| 1 | 1k8 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R119 |
| 1 | 1u | Capacitor_SMD:CP_Elec_4x5.7 | C105 |
| 1 | 1u | Capacitor_SMD:CP_Elec_4x5.4 | C127 |
| 1 | 220u | Capacitor_SMD:CP_Elec_10x10 | C104 |
| 1 | 22k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R602 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C113 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C125 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C126 |
| 1 | 240R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R114 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | X500 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R117 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R519 |
| 1 | 34958-0383 | 34958-0383:349580383 | J800 |
| 1 | 35RASMT6CHNTRX | 35RASMT6CHNTRX:35RASMT6CHNTRX | J401 |
| 1 | 4.7uH | XAL7030-472MEC:XAL7030472MEC | L100 |
The 345 most common of 392 parts.
.kicad_pcb.jpg?size=s&soon)
bradport02/RX8-Infotainment_System
An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.

bradport02/RX8-Infotainment_System
An infotainment system for the Mazda RX-8 that integrates seamlessly with the climate control unit.

NicholasKorth/BedCooler
A dual-zone heating and cooling controller for a bed: a 6-layer KiCad board with an STM32G474 real-time controller and a Raspberry Pi Compute Module 5 host.


hiro-akihabara/OpnBeat
OpnBeat is open source Lo-fi sampler project

electrified/rc2014-ym2151
Yamaha's DX21, DX27 and DX100 synthesisers used a derivative IC which is very similar.


SmittyHalibut/station-console
A station console, to connect an operator, logger, and radio together.


It measures 165.3 × 123.7 mm and has 4 copper layers, 1.6 mm thick.
392 parts, built around the MCP2551-I/SN-HG, NJM4556AM, ESD9B5.0ST5G and PTS636 SKG25J SMTR LFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bradport02/RX8-Infotainment_System repository on GitHub, at the commit this page was made from: the board is PCBs/RX8-7/RX8-7(WithoutOpAmps).kicad_pcb and its schematic PCBs/RX8-7/Audio3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bradport02 before reusing the design.