
CANNONBALL
user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with

Custom ESP32 PCB using a Time-of-Flight (ToF) sensor to accurately monitor distance from a laptop screen. Used to trigger a desktop popup whenever someone slouches.
KiCAD ESP32 Sensor is an open-source printed circuit board by AndrewMinWu, from the AndrewMinWu/Laptop-Slouching-Monitor repository on GitHub. It is a 2-layer board of 33 × 33.7 mm with 23 parts on 26 nets, routed with 170 tracks and 25 vias.
It is built around the ESP32-C3-WROOM-02-H4 and AP2112K-3.3. Its parts include 7 resistors, 5 capacitors, 2 ICs and 2 connectors. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
├── hardware/ # Schematic, PCB, and gerbers
├── firmware/ # PlatformIO C++ code, and Python script
└── docs/ # DatasheetsSpending long hours working at a computer, I noticed my posture deteriorating as I constantly leaned closer to the monitor. Over time, this habit leads to back pain and eye strain (probably why my eyesight is so bad). Therefore, to prevent future issues and to force myself to build better sitting habits, I designed a PCB using an ESP32 and a Time-of-Flight (ToF) sensor to accurately monitor my distance from the screen and trigger a desktop popup whenever I slouch.
The Schematic and PCB were designed in KiCad.
Short Demo
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | BOOT, RST |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_D1.0mm | 3V3 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | 5V |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | EN |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | GND |
| 1 | IO0 | TestPoint:TestPoint_Pad_D1.0mm | IO9 |
| 1 | USB_C_Receptacle_USB2.0_16P | USBC:GCT_USB4105-GF-A | J1 |
| 1 | VL53L0X_Module | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |

user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with


pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.



anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project

bapsenpai-blip/STM32F405-4-layer-flight-controller
My first PCB revision, not fabricated yet, looking for design review

It measures 33 × 33.7 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the ESP32-C3-WROOM-02-H4 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AndrewMinWu/Laptop-Slouching-Monitor repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD_ESP32_Sensor.kicad_pcb and its schematic Hardware/KiCAD_ESP32_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AndrewMinWu before reusing the design.