Skip to the content
4 layers52.9 × 79.1 mmRealFCV1, the printed circuit board in 3D

My first PCB revision, not fabricated yet, looking for design review

Size
52.9 × 79.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
94
Nets
103
Pads
410
Tracks, vias
804, 343
Pours
10
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Aug 2026
Updated
12 Aug 2026

Overview

RealFCV1 is an open-source printed circuit board by bapsenpai-blip, from the bapsenpai-blip/STM32F405-4-layer-flight-controller repository on GitHub. It is a 4-layer board of 52.9 × 79.1 mm with 94 parts on 103 nets, routed with 804 tracks and 343 vias.

It is built around the ESP32-C3-WROOM-02-H4, BMP280 and AP2112K-3.3, with the USBLC6-2SC6, ICM-20602 and SS14 among its other parts. Its parts include 29 capacitors, 28 resistors, 11 diodes, 8 ICs and 7 connectors. It belongs with the ESP32, STM32 and RISC-V boards of this library.

Main components

6

README

README.md

STM32F405-4-layer-flight-controller

Review Request!!!

Project status: PRE-FAB / UNTESTED

MCU: STM32F405RGT6

IMU: ICM-20602

Barometer: BMP280

Telemetry: ESP32-C3-WROOM-02 - DroneBrigde method

Layers: 4

Software target: ArduPilot

PCB: KiCad 10

DRC: https://github.com/labtroll/KiCad-DesignRules

Parts

94
QtyValueFootprintReferences
15100nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C14, C18, C20, C21, C23, C24, C29
1010kRResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR2, R3, R6, R9, R17, R20, R21, R24, R25, R26
101kRResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR7, R8, R12, R13, R14, R15, R16, R27, R28, R29
8LED_REDLED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolderD2, D5, D6, D7, D8, D10, D11, D12
41uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC13, C16, C25, C26
44.7kRResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR10, R11, R18, R19
45.1kRResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR4, R5, R22, R23
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_TopBottomH1, H2, H3, H4
4SW_PushButton_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxGSW1, SW2, SW3, SW4
32.2uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC11, C12, C15
3SS14Diode_SMD:D_SMAD3, D4, D9
212pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC9, C10
2AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5_HandSolderingU2, U7
2TestPointTestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mm-VIN_BEC1, +VIN_BEC1
2USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6_HandsolderingU3, U8
2USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1, J8
10.1uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC22
110nFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC19
110uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC28
14.7uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC27
14.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingU5
1Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1Conn_01x04_SocketConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ4
1Conn_01x06_SocketConnector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_HorizontalJ5
1Conn_01x08_SocketConnector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_HorizontalJ3
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY1
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U6
1ICM-20602Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5yU4
1Micro_SD_CardConnector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5J2
1STM32F405RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1

Similar boards

  • 4 layers36 × 36 mmRl fc f405.routed, the printed circuit board in 3D

    Rl fc f405.routed

    GabuGravin41/rlpcb

    RL PCB sits beside KiCad and works like a senior hardware engineer looking over your shoulder. You describe what you want to build; it helps you choose real parts from your KiCad libraries, works out the values, places…

    65 parts2
  • 4 layers64 × 60 mmDronemagnav, the printed circuit board in 3D

    Dronemagnav

    ajisrawi/dronemagnav

    Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.

    60 parts11
  • 2 layers40 × 40 mmProject2, the printed circuit board in 3D

    Project2

    Parwaz-Dynamics/Embedded-In-Bones

    My personal embedded systems learning journey projects.

    48 parts
  • 4 layers36 × 36 mmFc f405, the printed circuit board in 3D

    Fc f405

    fkontiebo/flight-controller

    Contrôleur de vol 4 layers basé sur STM32F405RGT6, conçu comme plateforme de navigation autonome avec bus CAN.

    97 partsMIT
  • 4 layers46.3 × 38.6 mmRrr, the printed circuit board in 3D

    Rrr

    PositiveAltitude/rrr-hardware

    77 parts10
  • 2 layers100 × 75 mmAeroFC, the printed circuit board in 3D

    AeroFC

    angelowickramasinghe/Project-Drone

    AeroFC-1S 1S brushed micro-quad flight controller (KiCad) — schematic, PCB, Gerbers, LCSC BOM

    57 parts
  • 6 layers47.6 × 41.5 mmOLL.E fpv pcb, the printed circuit board in 3D

    OLL.E fpv pcb

    Tamim101/ardupilot-drone-pcb

    141 parts
  • 2 layers47.6 × 41.5 mmOLL.E fpv pcb, the printed circuit board in 3D

    OLL.E fpv pcb

    Tamim101/flight-controller-PCB

    130 parts

Questions

How big is the RealFCV1 PCB?

It measures 52.9 × 79.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the RealFCV1 use?

94 parts, built around the ESP32-C3-WROOM-02-H4, BMP280, AP2112K-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RealFCV1 KiCad files?

From the bapsenpai-blip/STM32F405-4-layer-flight-controller repository on GitHub, at the commit this page was made from: the board is RealFCV1.kicad_pcb and its schematic RealFCV1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RealFCV1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask bapsenpai-blip before reusing the design.