
Atmos
HearnChristian/atmos-sense
ESP32-based atmospheric sensing node: BME280 environmental sensing and AS3935 lightning detection over I2C, designed for drone integration. KiCad hardware plus firmware.

building my own kindle from scratch
Kindle is an open-source printed circuit board by AdityaCoppisetti, from the AdityaCoppisetti/Kindle-hackclub repository on GitHub. It is a 4-layer board of 53.5 × 46 mm with 44 parts on 37 nets, routed with 399 tracks and 41 vias.
It is built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3 and USBLC6-2SC6, with the PESD3V3S1UL among its other parts. Its parts include 14 resistors, 12 capacitors, 7 connectors, 4 ICs and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.
hey im dhruv coppisetti and i built my own kindle from scratch using a e ink display and my own custom pcb i designed! i absolutely love e ink displays and have been wanting to build my own kindle from a very long time. i dont want something thats too fancy or has too much, a simple kindle type design works aswell.
i love reading books and with all the travelling that im doing, i havent been able to carry my books and i know i could just download books on my phone and read them that way but i am just a sucker for single purpose technology. and its just so amazing building your own devices and with the hackclub's macondo program i thought i should make this and so i did. before this i havent really made much without using what was in my arduino kit. so in this project, i learnt along the way whatever it took me to make this and you can learn aswell from my journal.md in this project , i go over almost everything
here is how the kindle i designed looks like
i need to answer some questions to explain further why i built this
why am i making this? this is a device for students and avid readers like me who want a distraction free reading device with a long battery life and its open sourced.
what makes it different from a kindle? its fully open sourced hardware and firmware , its extremely repairable , expandable with a microsd card with customizable software and a secondary oled status display for battery , page nuber and reading progress.
display size - 4.2 inch e ink display
battery life- target of 3 to 6 weeks of normal reading with aggressive deep sleep and infrequent e ink refreshes
linux or bare metal? bare metal sice im using an esp32-c3 ( arduino framework with platformIO) this provides much lower power consumption and faster startup than linux
touchscreen? no physical buttons only for a distraction free reading experience and improved battery life.
for this project ill be making my own custom esp32 powered pcb
which looks like this -
it took me multiple versions of the pcb to come to this point you can find all of that in my journal.md
here is how the pcb looks like in kicad's 3d viewer
and obviously here is a lil 360
https://github.com/user-attachments/assets/d5890601-8e93-464f-907f-b951f2e43e23
you print the case from the step files that i have provided in the repo and then you use the rewuired screws to connect the case.
after you recieve the pcb , you take the stencil and then you apply the solder paste on the pcb using the stencil and then you place the required components on their place and reflow using hotplate or hot air blow gun.
and then you connect every module to the sd by using the labels on the silkscreen because i labelled where to solder what very precisely.
and then you connect everything
the 2 touch capacitive buttons on the side are to scroll thru the list of books you have and then the singular button on the side is to select the book.
after you select the book , you use the 2 switches on the right side to flip thru the pages
and even if you forget to turn off the kidnle dont worry as it will automatically go into sleep mode.
and if you want to load books onto the kindle you can do that by taking the sd card out and putting the books on the sd card and then putting the sd card back in the pcb
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R7, R8, R9 |
| 4 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J4, J5, J6 |
| 3 | R | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | R10, R11, R12 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 2 | TBD | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100N | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4U7 | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J8 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J7 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.00mm:PinHeader_1x08_P2.00mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ESD5Zxx | Diode_SMD:D_SOD-882D | D1 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | PESD3V3S1UL | Diode_SMD:D_SOD-882 | D3 |
| 1 | SW_Push | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | SW3 |
| 1 | TBD | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |

HearnChristian/atmos-sense
ESP32-based atmospheric sensing node: BME280 environmental sensing and AS3935 lightning detection over I2C, designed for drone integration. KiCad hardware plus firmware.

pushtiujeniya/ESP32-C3-WROOM02_dev-board
This project is a custom 2-layer development board designed around the ESP32-C3-WROOM-02 Wi‑Fi + Bluetooth MCU module.

anasskrim61-wq/esp32-c3-mini
Custom ESP32-C3 Mini IoT hardware design and KiCad PCB project

bapsenpai-blip/STM32F405-4-layer-flight-controller
My first PCB revision, not fabricated yet, looking for design review


NozomiNetworks/NN-antenna-manager
Open source project for a custom antenna manager for SDR cards

aayanrahman/Star-Notifier
Star-shaped USB-C ESP32-C3 board that lights up when Claude or Cursor is done

Akshath2002/ESP32-Mini-Evaluation-Board
A compact 4-layer ESP32 evaluation board designed in KiCad, focused on reliable power distribution, signal integrity, and ease of prototyping.
It measures 53.5 × 46 mm and has 4 copper layers, 1.6 mm thick.
44 parts, built around the ESP32-C3-WROOM-02-H4, AP2112K-3.3, USBLC6-2SC6 and PESD3V3S1UL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AdityaCoppisetti/Kindle-hackclub repository on GitHub, at the commit this page was made from: the board is ELECTRICALS/kindle.kicad_pcb and its schematic ELECTRICALS/kindle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AdityaCoppisetti before reusing the design.