Embedded linux

18 boards

KiCad boards from 12 GitHub repositories tagged “embedded-linux”, the most starred first; open any of them in PCBKit.

2 layers46.6 × 36.2 mm
Cold start power supply
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
29 parts72MIT
2 layers75 × 60 mm
DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0
6 layers50 × 60 mm
Tuxkeychain
electron271/tuxkeychain
Keychain shaped like Tux that can run Linux.
56 parts18CC-BY-SA-4.0
4 layers50 × 50 mm
Trellis core
protolux-electronics/trellis_core
A barebones KiCad project for Allwinner T113-based designs
89 parts13CERN-OHL-P-2.0
4 layers100 × 75 mm
IMX6ULL tryout
cebrax/iMX6ULL_tryout
iMX6ULL development board
223 parts8GPL-3.0
2 layers100.1 × 60.1 mm
Rpi shieled 2
nader3254/ann-Medics
Remote medical device based on embedded Linux System with Qt5 beautiful Gui and android application included
10 parts5
4 layers86 × 56 mm
Rv1106
EPSILON0-dev/Raven1106
Raspberry Pi-style SBC based on the Rockchip RV1106G3
217 parts4
4 layers30.1 × 66.6 mm
Network player
naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.
80 parts3MIT
2 layers80.5 × 99.9 mm
Automative Hexapod
NguyenTrongPhuc552003/reinforcement-autonomous-hexapod
Intelligent hexapod control system with AI-based adaptive gait, kernel drivers, and user-space coordination.
160 parts3GPL-2.0
2 layers38.1 × 24.1 mm
Charging interlock rev a
dsorensen228/sherman
Desktop robot project with C++ personality and display runtimes, Python hardware services, Pico 2 firmware, and PCB and enclosure design.
17 parts1
4 layers89.7 × 66 mm
Luckfox core3506 adapter
Rufilla/LuckFox-Core3506-Carrier
A carrier board for the LuckFox 3506 designed in KiCAD 10
131 parts1Apache-2.0
2 layers90 × 70 mm
Carrier proto
flyboy-byte/riscv-pico
Real Linux on a Raspberry Pi Pico, with its own PS/2 keyboard and VGA screen — the RP2040 emulates a RISC-V CPU, SPI PSRAM becomes system memory, and the guest drives real GPIO pins.
18 partsMIT
2 layers36.1 × 17.3 mm
TachAdapter
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
13 parts72MIT
2 layers67 × 59 mm
Touch panel
whitfijs-jw/Volvo240-DigitalDash
Volvo 240 Digital Dash Project. It's not much, but its honest work.
18 parts72MIT
2 layers56.5 × 53 mm
DUTler v1
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
13 parts23Apache-2.0
2 layers25.4 × 39.4 mm
Expansion
electron271/tuxkeychain
Keychain shaped like Tux that can run Linux.
5 parts18CC-BY-SA-4.0
2 layers30.1 × 65.1 mm
Dac
naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.
29 parts3MIT
2 layers110.1 × 111.8 mm
Automative Hexapod
NguyenTrongPhuc552003/reinforcement-autonomous-hexapod
Intelligent hexapod control system with AI-based adaptive gait, kernel drivers, and user-space coordination.
70 parts3GPL-2.0