Skip to the content
2 layers25.4 × 39.4 mmExpansion, the printed circuit board in 3D

Keychain shaped like Tux that can run Linux.

Size
25.4 × 39.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
17
Pads
55
Tracks, vias
104, 17
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 May 2025
Updated
29 Mar 2026

Overview

Expansion is an open-source printed circuit board by electron271, from the electron271/tuxkeychain repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 25.4 × 39.4 mm with 5 parts on 17 nets, routed with 104 tracks and 17 vias.

It belongs with the computers and single-board computers boards of this library.

README

artwork/README.md

Tux Keychain (/tux)

This folder contains the source files for the artwork of the Tux keychain.

Generated using https://gingerbread.wntr.dev/index.html. Set to 60x50mm.

Parts

5
QtyValueFootprintReferences
1EXPANSIONtuxkeychain:FFC_1x15_P0.5mmJ3
1LConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ5
1Micro_SD_Card_Det2Connector_Card:microSD_HC_Molex_104031-0811J1
1RConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ4
1TRRSConnector_Audio:Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_HorizontalJ2

More from electron271/tuxkeychain

1
  • 6 layers50 × 60 mmTuxkeychain, the printed circuit board in 3D

    Tuxkeychain

    electron271/tuxkeychain

    Keychain shaped like Tux that can run Linux.

    56 parts18CC-BY-SA-4.0

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Expansion PCB?

It measures 25.4 × 39.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Expansion use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Expansion KiCad files?

From the electron271/tuxkeychain repository on GitHub, at the commit this page was made from: the board is expansion/expansion.kicad_pcb and its schematic expansion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Expansion design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).