
Dac
naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.

The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF. This site documents how to build the firmware, flash it onto a board, and develop on top of it.
Network player is an open-source printed circuit board by naguirre, from the naguirre/mds-builder repository on GitHub, published under the MIT licence. It is a 4-layer board of 30.1 × 66.6 mm with 80 parts on 118 nets, routed with 1,036 tracks and 105 vias.
It is built around the F1C100S, ESP32-C3-MINI-1 and W25N01GVZEIG, with the EA3036QDR, BC817 and MMBT3904 among its other parts. Its parts include 29 capacitors, 26 resistors, 4 ICs, 3 transistors and 3 switches. It belongs with the audio and music and radio and wireless boards and the ESP32 and RISC-V boards of this library.
Open-source network audio player firmware. The board is built around an Allwinner F1C200s SoC running Linux and an ESP32-C3 companion chip handling Wi-Fi and BLE. Audio is routed out over SPDIF.
📖 Full documentation: https://naguirre.github.io/mds-builder/
make build # build firmware natively (Buildroot)
make build CONTAINER=1 # build inside the Docker containerOutput images land in output/images/. See the flashing guide for getting them onto a board.
buildroot_config/ — Buildroot defconfigs per machinemds_external/ — BR2_EXTERNAL tree (boards, packages, overlays, FIT image)mds-hardware/ — KiCad sources (see mds-hardware/README.md)doc/ — Zola site, source for the published docssrc/esp-hosted/ — vendored ESP-Hosted sourcescd doc && zola serveThe KiCad projects and PCB versions (v1, v1.1, v2) live under mds-hardware/. Schematics, PCB PDFs and gerbers are published alongside the documentation under /hardware/<version>/.
mds-hardware/): CERN-OHL-P v2 — see mds-hardware/LICENSE| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C7, C9, C11, C12, C13, C14, C17, C18, C19, C20, C34 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R9, R10, R13, R14, R15, R16, R17, R23, R24 |
| 9 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C6, C8, C10, C33, C37 |
| 7 | 0R | Resistor_SMD:R_0402_1005Metric | R11, R12, R20, R21, R22, R25, R26 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C15, C21, C35, C36 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 15k | Resistor_SMD:R_0402_1005Metric | R2, R4, R6 |
| 3 | 2.2uH | Inductor_SMD:L_0805_2012Metric | L1, L2, L3 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2, SW3 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C38 |
| 1 | 24MHz | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | EA3036 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U6 |
| 1 | ESP32-C3-MINI-1 | espressif:ESP32-C3-MINI-1 | U4 |
| 1 | F1C100s | Package_DFN_QFN:QFN-88_EP_10x10_Pitch0.4mm | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | TP_1v1 | TestPoint:TestPoint_Pad_D1.0mm | 1v1 |
| 1 | TP_2v5 | TestPoint:TestPoint_Pad_D1.0mm | 2v5 |
| 1 | TP_3v3 | TestPoint:TestPoint_Pad_D1.0mm | 3v3 |
| 1 | TP_5v | TestPoint:TestPoint_Pad_D1.0mm | 5v1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GT-USB-7010 | J4 |
| 1 | W25N01GVZEIG | Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U3 |

naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.

TreeNewbeer/Coonix
Coonix is a funny project about building a application platform in Allwinner-v3s processor.

balmerdx/AllwinnerV3S_KiCad
Its a cheap "single board computer". Closest analogue Lichee PI.

electron271/tuxkeychain
Keychain shaped like Tux that can run Linux.



vrubel/indicator-fun-V3s
"indicator.fun" device implementation on the processor Allwinner V3s


It measures 30.1 × 66.6 mm and has 4 copper layers, 7.78 mm thick.
80 parts, built around the F1C100S, ESP32-C3-MINI-1, W25N01GVZEIG and EA3036QDR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the naguirre/mds-builder repository on GitHub, at the commit this page was made from: the board is mds-hardware/network_player/network_player.kicad_pcb and its schematic mds-hardware/dac/dac.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).