Skip to the content
PCBKitNew board

Buildroot

13 boards

KiCad boards from 7 GitHub repositories tagged “buildroot”, the most starred first; open any of them in PCBKit.

  • 2 layers46.6 × 36.2 mmCold start power supply, the printed circuit board in 3D

    Cold start power supply

    whitfijs-jw/Volvo240-DigitalDash

    Volvo 240 Digital Dash Project. It's not much, but its honest work.

    29 parts72MIT
  • 2 layers36 × 64 mmExtension clk adc, the printed circuit board in 3D

    Extension clk adc

    oscimp/oscimpDigital

    OscillatorIMP ecosystem for the digital characterization of ultrastable oscillators and Software Defined Radio (SDR) frontend processing

    34 parts59
  • 2 layers100 × 84 mmCyclope, the printed circuit board in 3D

    Cyclope

    RICCIARDI-Adrien/Cyclope

    Raspberry Pi powered robot with camera live stream and 360° lidar.

    88 parts5MIT
  • 4 layers58 × 66 mmH616 devboard, the printed circuit board in 3D

    H616 devboard

    Bogdan8266/h616-board

    8-layer Allwinner H616/618 SBC with DDR3, USB, Wi-Fi/BT and battery power support, designed for embedded Linux.

    165 parts4CERN-OHL-P-2.0
  • 4 layers30.1 × 66.6 mmNetwork player, the printed circuit board in 3D

    Network player

    naguirre/mds-builder

    The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.

    80 parts3MIT
  • 4 layers79.4 × 119.4 mmPokeboy hw, the printed circuit board in 3D

    Pokeboy hw

    cameo-5958/pokeboy

    Game Boy handheld with its own emulator and a Gen 1 Pokemon battle AI that runs on the device

    111 partsMIT
  • 2 layers90 × 70 mmCarrier proto, the printed circuit board in 3D

    Carrier proto

    flyboy-byte/riscv-pico

    Real Linux on a Raspberry Pi Pico, with its own PS/2 keyboard and VGA screen — the RP2040 emulates a RISC-V CPU, SPI PSRAM becomes system memory, and the guest drives real GPIO pins.

    18 partsMIT
  • 2 layers36.1 × 17.3 mmTachAdapter, the printed circuit board in 3D

    TachAdapter

    whitfijs-jw/Volvo240-DigitalDash

    Volvo 240 Digital Dash Project. It's not much, but its honest work.

    13 parts72MIT
  • 2 layers67 × 59 mmTouch panel, the printed circuit board in 3D

    Touch panel

    whitfijs-jw/Volvo240-DigitalDash

    Volvo 240 Digital Dash Project. It's not much, but its honest work.

    18 parts72MIT
  • 2 layers39.5 × 56 mmDebug Adapter, the printed circuit board in 3D

    Debug Adapter

    Bogdan8266/h616-board

    8-layer Allwinner H616/618 SBC with DDR3, USB, Wi-Fi/BT and battery power support, designed for embedded Linux.

    25 parts4CERN-OHL-P-2.0
  • 8 layersH616 devboard, the printed circuit board in 3D

    H616 devboard

    Bogdan8266/h616-board

    8-layer Allwinner H616/618 SBC with DDR3, USB, Wi-Fi/BT and battery power support, designed for embedded Linux.

    142 parts4CERN-OHL-P-2.0
  • 8 layers50 × 50 mmH616 devboard, the printed circuit board in 3D

    H616 devboard

    Bogdan8266/h616-board

    8-layer Allwinner H616/618 SBC with DDR3, USB, Wi-Fi/BT and battery power support, designed for embedded Linux.

    161 parts4CERN-OHL-P-2.0
  • 2 layers30.1 × 65.1 mmDac, the printed circuit board in 3D

    Dac

    naguirre/mds-builder

    The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.

    29 parts3MIT