
Network player
naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.

The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF. This site documents how to build the firmware, flash it onto a board, and develop on top of it.
Dac is an open-source printed circuit board by naguirre, from the naguirre/mds-builder repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.1 × 65.1 mm with 29 parts on 48 nets, routed with 139 tracks and 4 vias.
It is built around the ES9023P and LP5912-3.3DRVR. Its parts include 10 capacitors, 6 connectors, 3 resistors, 3 ICs and 1 diode. It belongs with the audio and music and radio and wireless boards of this library.
Open-source network audio player firmware. The board is built around an Allwinner F1C200s SoC running Linux and an ESP32-C3 companion chip handling Wi-Fi and BLE. Audio is routed out over SPDIF.
📖 Full documentation: https://naguirre.github.io/mds-builder/
make build # build firmware natively (Buildroot)
make build CONTAINER=1 # build inside the Docker containerOutput images land in output/images/. See the flashing guide for getting them onto a board.
buildroot_config/ — Buildroot defconfigs per machinemds_external/ — BR2_EXTERNAL tree (boards, packages, overlays, FIT image)mds-hardware/ — KiCad sources (see mds-hardware/README.md)doc/ — Zola site, source for the published docssrc/esp-hosted/ — vendored ESP-Hosted sourcescd doc && zola serveThe KiCad projects and PCB versions (v1, v1.1, v2) live under mds-hardware/. Schematics, PCB PDFs and gerbers are published alongside the documentation under /hardware/<version>/.
mds-hardware/): CERN-OHL-P v2 — see mds-hardware/LICENSE| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 10uF/25V | Capacitor_SMD:CP_Elec_4x5.8 | C3, C8, C9 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C10 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | NetTie_2 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | NT1, NT2 |
| 1 | 1N5822/SS34/SMA | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.2uF/50V | Capacitor_SMD:CP_Elec_4x5.8 | C2 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 3v3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | ES9023 | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U2 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | GNDA | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | LEFT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | LP5912-3.3DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U5 |
| 1 | RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | TCXO 49.152 MHz | Oscillator:Oscillator_SMD_Fordahl_DFAS11-4Pin_7.0x5.0mm_HandSoldering | U1 |

naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.

SharKingStudios/Fracture
An infinitely expandable, velocity sensing split midi keyboard.


jamesratzlaff/Serdaco-X16
I wanted to make a case for the Serdaco DreamBlaster X16. Since I rarely do anything half-way when it comes to visualization, I busted out the datasheets and got to work. This is not a functionally accurate PCB.


OpenDrone-hw/OpenFC-Lite-Mini
Open-source Betaflight flight controller. RP2354A, 20x20 mm, 6-layer, 3-6S, CERN-OHL-S-2.0.

OpenDrone-hw/OpenFC-Lite
Open-source Betaflight flight controller. RP2354B, 30.5x30.5 mm, 6-layer, 3-8S, CERN-OHL-S-2.0.


greghulette/Wireless_Communication_Board-WCB
Repository for the Wireless Commuincation Board (WCB)
It measures 30.1 × 65.1 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ES9023P and LP5912-3.3DRVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the naguirre/mds-builder repository on GitHub, at the commit this page was made from: the board is mds-hardware/dac/dac.kicad_pcb and its schematic mds-hardware/dac/dac.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).