

A custom development board for an soc
- Size
- 62 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 95
- Pads
- 329
- Tracks, vias
- 750, 96
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Aug 2020
- Updated
- 24 Aug 2020
Overview
F1c200s is an open-source printed circuit board by Mr-Bossman, from the Mr-Bossman/f1c200s-dev-board repository on GitHub. It is a 2-layer board of 62 × 46 mm with 64 parts on 95 nets, routed with 750 tracks and 96 vias.
It is built around the F1C100S and 10118194-0011LF. Its parts include 22 capacitors, 15 connectors, 13 resistors, 4 ICs and 2 diodes. It belongs with the microcontroller boards boards of this library.
Main components
2README
README.md"# f1c200s-dev-board usb otg needs to be fixed and sdcard locaton and flash pad size and 3.3 requlators pad is rotated"
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C17, C18, C19 |
| 6 | .1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C20, C21, C22 |
| 3 | 220k | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R12, R13 |
| 3 | 22R | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
| 3 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8, J13, J14 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R8 |
| 2 | 105162-0001 | 105162-0001:105162-0001 | J11, J15 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C16 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J6 |
| 2 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J7, J10 |
| 2 | Jumper | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5, JP6 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 10118194-0011LF | 10118194-0011LF:101181940011LF | J12 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 24MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 3.3K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 3.3v | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | AT25xxx | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | CS | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | Conn_02x14_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x14_P2.54mm_Vertical | J1 |
| 1 | F1C100s | F1C100s:F1C100s | U2 |
| 1 | MISO | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP4 |
| 1 | MOSI | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3 |
| 1 | SCK | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | SW_Push | button:button | SW1 |
| 1 | XC6421AB03ER-G | XC6421AB03ER-G:XC6421AB03ER-G | U3 |
Similar boards
- 4 layers47 × 106 mm

- 4 layers129.3 × 113.2 mm

Hid controller pcb
elitetq/hid-controller
Making a custom HID controller PCB for interfacing with operating systems like Windows to play games.
72 parts - 2 layers27.5 × 48.3 mm

ICE40DevBoard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
41 parts915 - 4 layers141.7 × 134.1 mm

- 6 layers50 × 60 mm

Tuxkeychain
electron271/tuxkeychain
Keychain shaped like Tux that can run Linux.
56 parts18CC-BY-SA-4.0 - 4 layers30.1 × 66.6 mm

Network player
naguirre/mds-builder
The Manufacture du Son network player is a custom board built around an Allwinner f1c200s SoC running Linux and an ESP32-C3 companion chip providing Wi-Fi and BLE. Audio is routed out over SPDIF.
80 parts3MIT - 2 layers60.4 × 36 mm

- 4 layers25.5 × 32 mm

Questions
How big is the F1c200s PCB?
It measures 62 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the F1c200s use?
64 parts, built around the F1C100S and 10118194-0011LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F1c200s KiCad files?
From the Mr-Bossman/f1c200s-dev-board repository on GitHub, at the commit this page was made from: the board is f1c200s.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the F1c200s design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mr-Bossman before reusing the design.