Skip to the content
PCBKitNew board

Commodore

94 boards

KiCad boards from 62 GitHub repositories tagged “commodore”, the most starred first; open any of them in PCBKit.

  • 2 layers31.5 × 75.7 mmZ80-dot gal, the printed circuit board in 3D

    Z80-dot gal

    ytmytm/c128-z80-8mhz

    Double the clock speed of Z80 in C128

    11 parts29
  • 2 layers44.5 × 35.8 mmOpenA1200RTC, the printed circuit board in 3D

    OpenA1200RTC

    screwbreaker/OpenA1200RTC

    Open Hardware RTC module for the Amiga 1200.

    14 parts27
  • 2 layers111.6 × 37.5 mmOpenAmiga2000CoproAdapter, the printed circuit board in 3D

    OpenAmiga2000CoproAdapter

    SukkoPera/OpenAmiga2000CoproAdapter

    Move your Amiga 2000 CPU to the Coprocessor slot!

    19 parts27
  • 2 layers28.2 × 28.2 mmOpenAmigaMouseTrigger, the printed circuit board in 3D

    OpenAmigaMouseTrigger

    SukkoPera/OpenAmigaMouseTrigger

    Control Amiga add-on boards through mouse buttons

    11 parts27
  • 2 layers99.7 × 74.9 mmC64 Joykey 2040, the printed circuit board in 3D

    C64 Joykey 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    69 parts27
  • 2 layers99.7 × 64.1 mmPlayOnTape Module, the printed circuit board in 3D

    PlayOnTape Module

    tebl/C64-PlayOnTape

    It's a tapuino, mostly because I wanted to build one. Uses an Arduino to load tapes on the good old Commodore 64.

    32 parts22
  • 2 layers54.6 × 53.3 mmPicovic, the printed circuit board in 3D

    Picovic

    jfoucher/picovic

    Vic-20 emulation on a Raspberry Pi Pico

    22 parts20MIT
  • 2 layers56 × 91 mmTcbm2sd, the printed circuit board in 3D

    Tcbm2sd

    ytmytm/plus4-tcbm2sd

    CBM 1551 paddle replacement / mass storage using an SD card interfacing with the Commodore C16/116/Plus4 simulating a TCBM bus 1551 disk drive

    27 parts19
  • 2 layers30.3 × 35.8 mmAtkDongle, the printed circuit board in 3D

    AtkDongle

    SukkoPera/AtkDongle

    Troubleshoot parallel and serial ports on Amiga Computers

    16 parts17
  • 2 layers87.8 × 83.5 mmChip tester, the printed circuit board in 3D

    Chip tester

    sajattack/yo6530

    FPGA Gateware for Commodore MOS 6530 RRIOT

    8 parts16MIT
  • 2 layers100 × 100 mm1551-III Pico, the printed circuit board in 3D

    1551-III Pico

    ytmytm/1551-rePico

    Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.

    80 parts16GPL-3.0
  • 2 layers60.8 × 99.9 mmReSeed, the printed circuit board in 3D

    ReSeed

    SukkoPera/ReSeed

    Sounds from C64 now for Plus/4!

    59 parts15
  • 2 layers99.1 × 82.4 mmC64ExpansionBreakout, the printed circuit board in 3D

    C64ExpansionBreakout

    hackup/C64ExpansionBreakout

    Breakout Board for the Expansion Port of the C64

    11 parts14
  • 2 layers51.8 × 26.4 mmOpenAmigaFourPlayerAdapter, the printed circuit board in 3D

    OpenAmigaFourPlayerAdapter

    SukkoPera/OpenAmigaFourPlayerAdapter

    Connect up to four joysticks to your Amiga!

    6 parts14
  • 2 layers30.5 × 42.9 mmOpenC16JoyAdapter, the printed circuit board in 3D

    OpenC16JoyAdapter

    SukkoPera/OpenC16JoyAdapter

    Open Hardware Joystick Adapter for C-16, C-116 and Plus/4

    9 parts14
  • 2 layers60.8 × 85 mm16up, the printed circuit board in 3D

    16up

    SukkoPera/16up

    User Port Cartridge for the Commodore 16, 116 and Plus/4

    20 parts13
  • 2 layers41 × 43.6 mmDatassetteAudioAdapter, the printed circuit board in 3D

    DatassetteAudioAdapter

    SukkoPera/DatassetteAudioAdapter

    Replace the Commodore Datassette with any audio source!

    20 parts13
  • 2 layers26.9 × 26 mmC64TapePortBreakOut, the printed circuit board in 3D

    C64TapePortBreakOut

    SukkoPera/OpenC64TapePortBreakOut

    Commodore 1530 Datassette Connector Breakout PCB

    6 parts13
  • 2 layers55.9 × 43.9 mmRfreplacement, the printed circuit board in 3D

    Rfreplacement

    pmandes/C64-RF-Modulator

    Commodore C64C RF modulator replacement with S-Video and stereo audio output.

    36 parts9MIT
  • 2 layers56.3 × 82 mmHannes256, the printed circuit board in 3D

    Hannes256

    SukkoPera/Hannes256

    256 kB RAM Expansion for the Commodore 16/+4

    38 parts8
  • 2 layers54.3 × 72.2 mmHannes512, the printed circuit board in 3D

    Hannes512

    SukkoPera/Hannes512

    512 kB RAM Expansion for the Commodore 16/+4

    25 parts8
  • 2 layers60.8 × 99.9 mmSoundX, the printed circuit board in 3D

    SoundX

    SukkoPera/SoundX

    An AdLib card for your Commodore 16/116/+4!

    55 parts8
  • 2 layers30.5 × 12.7 mmSyncFix64, the printed circuit board in 3D

    SyncFix64

    hackup/SyncFix64

    LM1881 based quick-fix for the C64 VSync

    16 parts7