Commodore

94 boards

KiCad boards from 62 GitHub repositories tagged “commodore”, the most starred first; open any of them in PCBKit.

2 layers25.7 × 76.6 mm
OpenKickstartSwitcher
SukkoPera/OpenKickstartSwitcherCDTV
Open Hardware Kickstart Switcher for the Commodore CDTV
12 parts7
2 layers33.5 × 62.7 mm
Fixteen
SukkoPera/Fixteen
Internal 64 kB RAM Expansion for the Commodore 16
16 parts6
2 layers54 × 47.5 mm
Plus4Serial
SukkoPera/Plus4Serial
RS-232 Serial Port Adapter for the Commodore Plus/4
13 parts6
2 layers52.3 × 51.8 mm
ReBlast
SukkoPera/ReBlast
8-Bit DAC/ADC Add-On for Commodore 16/Plus4 SIDcards
27 parts6
2 layers26.9 × 59.8 mm
TapecartFlasher
hackup/TapecartFlasherNano
Arduino Nano Shield for Flashing Tapecarts
18 parts5
2 layers
C64-autofire
lutzbellmann/c64-autofire
Autofire Adapter for the Commodore 64 Control Ports
11 parts5GPL-3.0
2 layers65 × 63.2 mm
NessieSoup
SukkoPera/NessieSoup
Connect a Super Nintendo controller to your Commodore 64/128/+4/VIC-20/PET
8 parts4
2 layers56 × 91 mm
Burstcart via
ytmytm/plus4-burstcart
Burst (fast serial) capable cartridge for Commodore C16/116/Plus4
24 parts4
2 layers143.3 × 77.5 mm
Pedisk
mnaberez/pedisk2
Reverse engineering the CGRS Microtech PEDISK II disk system for Commodore PET/CBM computers
43 parts3
2 layers40.6 × 19 mm
Din-6-breadboard
baldengineer/Arduino-1541
Interact with a Commodore 1541 from an Arduino
25 parts2MIT
2 layers89.2 × 87.9 mm
WheelOfJoy
SukkoPera/WheelOfJoy
8-player joystick adapter for the Commodore 16, 116 and Plus/4
39 parts2
2 layers47.8 × 45.4 mm
WheelOfJoy
SukkoPera/WheelOfJoyMini
4-player joystick adapter for the Commodore 16, 116 and Plus/4 with 2-button support
26 parts2
2 layers52.1 × 70 mm
Plus4i8255
SukkoPera/Plus4i8255
Intel 8255 Interface for the Commodore 16, 116 and Plus/4
13 parts1
2 layers103 × 40.8 mm
VIC-20-InternalRAM
jimbro1000/VIC-20-ROM-and-RAM
Board to simplify replacement of 2364 mask roms on a VIC-20 and provide internal ram expansion
11 parts
2 layers127 × 69.9 mm
Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446
2 layers271.8 × 78.7 mm
PCPI AppliCard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
82 parts446
2 layers367.5 × 124.2 mm
Platinum IIe keyboard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
106 parts446
2 layers92.8 × 71.8 mm
USBSID Pico v1.0
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
96 parts125GPL-2.0
2 layers52.6 × 18.5 mm
Volume daughterboard
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
32 parts125GPL-2.0
2 layers341.2 × 124.5 mm
Vic2020keyboard
danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts
76 parts78
2 layers50 × 41.6 mm
Nunchuk64-tht
djtulan/nunchuk64
A Nintendo (Nunchuk) Controller Adapter for Commodore 64.
21 parts62GPL-3.0
2 layers97.8 × 97.8 mm
C64 Pi1541-II Faceplate
tebl/C64-Pi1541-II
I wanted a Pi1541 module that did not feel like I was handling bare electronics, so I made one that hides most of the scary bits (no 3d-printer required).
9 parts59
2 layers97.8 × 97.8 mm
C64 Pi1541-II FaceplateB
tebl/C64-Pi1541-II
I wanted a Pi1541 module that did not feel like I was handling bare electronics, so I made one that hides most of the scary bits (no 3d-printer required).
9 parts59
2 layers100 × 23.2 mm
C64 Pi1541-III Module Panel
tebl/C64-Pi1541-III
I wanted a Pi1541-module that did not feel like I was handling bare electronics, so I made another that manages to hide most of the scary bits without needing a 3d-printer.
15 parts44