Skip to the content
2 layers56 × 91 mmTcbm2sd, the printed circuit board in 3D

CBM 1551 paddle replacement / mass storage using an SD card interfacing with the Commodore C16/116/Plus4 simulating a TCBM bus 1551 disk drive

Size
56 × 91 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
83
Pads
267
Tracks, vias
1,318, 164
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Jul 2024
Updated
5 Oct 2026

Overview

Tcbm2sd is an open-source printed circuit board by ytmytm, from the ytmytm/plus4-tcbm2sd repository on GitHub. It is a 2-layer board of 56 × 91 mm with 27 parts on 83 nets, routed with 1,318 tracks and 164 vias.

It is built around the AMS1117-3.3 and AMS1117. Its parts include 7 capacitors, 5 connectors, 4 ICs, 3 resistors and 2 switches. It belongs with the retro computing and games and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

Main components

2

README

README.md

TCBM2SD


by Maciej 'YTM/Elysium' Witkowiak

CBM 1551 paddle replacement and/or mass storage using an SD card interfacing with the Commodore C16/116/Plus4 simulating a TCBM bus 1551 disk drive.

Ecosystem

This board can also serve as the Commodore-side TCBM interface for the Pi1551, a cycle-exact Commodore 1551 emulator for Raspberry Pi. It can be used with either the Pi1551-HAT or Pi1551-III interface.

It is also the TCBM interface for the 1551-rePico, a 1551 drive replacement that uses a real 6510T with Raspberry Pico 2 emulating the analog parts.

The Parobek function ROM is a useful way to populate the 32/64 KiB ROM socket. It includes the TCBM2SD boot software, so boot.t2sd is not needed when using that ROM.

Detailed manuals

Software

ZIP archive of the above

Media

Commodore Users Europe presentation

Commodore Users Europe presentation about TCBM2SD

Click for video

Photos

The photos and PCB view below show an older board revision and are provided for reference only.

tcbm2sd PCB and Plus/4 to scale tcbm2sd installed in Plus/4 expansion port tcbm2sd populated PCB

Basic operations

Basic operation

Click for video

Fastloader

Fastloader demo

Click for video

Features

Drive simulator

TCBM2SD does not emulate a 1551, but simulates its behavior:

  • DLOAD and DSAVE support for files
  • read-only support for disk images (D64, D71, D81, D80, D82) as subdirectories
  • standard Kernal transfer at about 3100 b/s (a little less than JiffyDOS 1541, and about twice as fast as a 1551 at 1600 b/s); fastload at about 9300 b/s (23× as fast as a 1541, about 6× as fast as a 1551), with patched Directory Browser v1.2; on par with DolphinDOS
  • fastload booter embedded in the flash, available as the * file, which loads and runs BOOT.T2SD from the root directory; this can be any file that runs from BASIC. Directory Browser patched with fastload protocol is recommended. When using the Parobek function ROM, BOOT.T2SD is already included in the ROM and is not needed on the SD card.
  • CBM DOS disk commands: CD, R, S, MD, RD, I, UI, UJ
  • utility commands similar to 1571/81 BURST for fastloader, block-read/write and device number change
  • device number stored permanently in EEPROM or configurable with jumpers
  • support for absolute paths (up to 71 characters)
  • support for SD change detection (if the SD card socket supports it) to automatically initialize card
  • PREV/NEXT buttons to switch between disk images
  • socket for a 32/64 KiB cartridge ROM

Paddle replacement

It has been confirmed that tcbm2sd works as a 1551 paddle cartridge replacement with a real 1551 drive. The Arduino can be removed or disabled for this purpose.

  • PLA 251641-3 and 6523T (28 pin triport) integrated into a single CPLD
  • low part count: CPLD, 3.3V voltage regulator and four capacitors
  • only 8 I/O addresses are needed for I/O, but certain fastloaders require the mirrored registers to be present, so we keep using whole 32-byte space like the original PLA:
    • FEE0-FEFF (instead of FEF0-FEF7) for device 8
    • FEC0-FEDF (instead of FEC0-FEC7) for device 9

Platform for TCBM developments

The paddle part exposes all TCBM bus signals and can be used as a basis for other TCBM hardware projects.

For development, another daughterboard or a ready-to-use microcontroller module can be used. All TCBM bus signals are exposed at the cartridge edge (TCBM connector) or Arduino footprint. Signals are already at 3.3 V logic, so no additional level shifter is necessary for a Raspberry Pi.

Please note that if a TCBM cable is connected then both pins 1 and 16 of the TCBM connection must be connected to GND. It's used by Arduino to detect if TCBM cable is attached so that Arduino can disable itself.

Availability

The information published here includes everything required to manufacture the PCB (Gerber files) and program the firmware.

If you want a completed unit, please drop me a message (you will find my email address at the top of loader/loader.asm). I might have some units to sell; please include your country.

Case

You might also be interested in a cartridge case. It should fit inside this one, although it requires cutting a slot for the SD card.

This example shows revision 1.1 without NEXT/PREV buttons

General view Side view Opened case

There is also an updated case project that should fit revision 1.3 and 1.4 PCBs without any extra holes.

Credits

This project builds on work and documentation provided by others:

Parts

27
QtyValueFootprintReferences
40.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4
310µCapacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S_HandSolderC5, C6, C7
210KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3
2SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabelsJP3, JP4
12.2RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
127C512Package_DIP:DIP-28_W15.24mm_SocketU4
1ALT_A6_A7Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1AMS1117Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1Arduino Pro MiniArduino:Arduino_Pro_MiniU2
1BUT_NEXTLittleSixteen:SW_PUSH_6mm_OR_SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW2
1BUT_PREVLittleSixteen:SW_PUSH_6mm_OR_SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW1
1C16_CARTRIDGEc264-magic-cart-rev1:C16_CARTU$1
1JTAGConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1SD CARDConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ5
1SD connectorSD2IECplug:Conn_uSDcardXS1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabelsJP2
1TCBMConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ1
1XC9572XL-VQ64Package_QFP:TQFP-64_10x10mm_P0.5mmU1

Similar boards

  • 2 layers89.6 × 79 mmTDR 5351 core, the printed circuit board in 3D

    TDR 5351 core

    MR-DOS/TDR_diploma_thesis

    Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

    199 parts33GPL-3.0
  • 2 layers99 × 54 mmRocciBoard, the printed circuit board in 3D

    RocciBoard

    Robotics-Competence-Center-Illertal-e-V/RocciBoard-PCB

    Layout and Schematic for the Rocci Board

    223 parts3
  • 2 layers355 × 120 mmAniboard, the printed circuit board in 3D

    Aniboard

    cheyao/aniboard

    An Anime-themed MX keyboard

    392 partsZlib
  • 2 layers56 × 91 mmBurstcart cpld-44, the printed circuit board in 3D

    Burstcart cpld-44

    ytmytm/plus4-burstcart

    Burst (fast serial) capable cartridge for Commodore C16/116/Plus4

    16 parts4
  • 2 layers92.4 × 52.7 mmOscilloscope power other, the printed circuit board in 3D

    Oscilloscope power other

    yogendra-kumawat/pcb-hub

    This folder contains the complete KiCad project for the writing machine motor driver board.

    23 partsMIT
  • 2 layers74.4 × 51.2 mmEsp32-wroom timer, the printed circuit board in 3D

    Esp32-wroom timer

    AlessandroAU/Chorus32-ESP32LapTimer

    This is an ESP32 port of the popular Chorus RF Laptimer

    66 parts102GPL-3.0
  • 2 layers44 × 20.5 mmQrng, the printed circuit board in 3D

    Qrng

    Spooky-Manufacturing/QRNG

    Quantum Random Number Generator

    29 parts86GPL-3.0
  • 4 layers125 × 90 mmAnalog board, the printed circuit board in 3D

    Analog board

    EERNINUO/ArbWave30

    ArbWave30 – 30MHz 任意波形发生器 | FPGA + 高速DAC | SCPI 可控

    295 parts53GPL-3.0

Questions

How big is the Tcbm2sd PCB?

It measures 56 × 91 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tcbm2sd use?

27 parts, built around the AMS1117-3.3 and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tcbm2sd KiCad files?

From the ytmytm/plus4-tcbm2sd repository on GitHub, at the commit this page was made from: the board is tcbm2sd/tcbm2sd.kicad_pcb and its schematic tcbm2sd/tcbm2sd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tcbm2sd design in my own project?

Its repository states no licence, so its author keeps all rights: ask ytmytm before reusing the design.