Skip to the content
PCBKitNew board

Verilog

77 boards

KiCad boards from 40 GitHub repositories tagged “verilog”, the most starred first; open any of them in PCBKit.

  • 4 layers25.4 × 58.5 mmShrike lite, the printed circuit board in 3D

    Shrike lite

    vicharak-in/shrike

    Low cost microcontroller + FPGA board for makers , hobbyist and student for endless possibility.

    60 parts537GPL-2.0
  • 2 layers237.5 × 102.9 mmInstruction, the printed circuit board in 3D

    Instruction

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    112 parts301Unlicense
  • 6 layers31.7 × 110 mmEurorack pmod pcb, the printed circuit board in 3D

    Eurorack pmod pcb

    apfaudio/eurorack-pmod

    A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.

    155 parts241
  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    214 parts195MIT
  • 2 layers249.9 × 89.4 mmCSCvon8, the printed circuit board in 3D

    CSCvon8

    DoctorWkt/CSCvon8

    A crazy small 8-bit CPU built with only seventeen 7400-series chips.

    55 parts112GPL-3.0
  • 2 layers33 × 71.1 mmFpga composite video, the printed circuit board in 3D

    Fpga composite video

    Slamy/fpga-composite-video

    Verilog implementation of PAL, NTSC and SECAM color encoding

    22 parts76MIT
  • 4 layers38 × 38 mmReSDMAC, the printed circuit board in 3D

    ReSDMAC

    mbtaylor1982/ReSDMAC

    Verilog code to replace the Commodore SDMAC found in the A3000

    36 parts51CC-BY-SA-4.0
  • 4 layers65 × 30 mmSizif xxs, the printed circuit board in 3D

    Sizif xxs

    UzixLS/zx-sizif-xxs

    Smallest ZX Spectrum clone with real Z80 and FPGA

    90 parts50MIT
  • 2 layers170 × 64 mmZx multisound, the printed circuit board in 3D

    Zx multisound

    UzixLS/zx-multisound

    ZX Spectrum soundcard for NEMOBUS/ZXBUS

    200 parts40MIT
  • 2 layers140 × 85 mmSizif128, the printed circuit board in 3D

    Sizif128

    UzixLS/zx-sizif-128

    Easy-to-build minimalistic ZX Spectrum clone

    112 parts34MIT
  • 4 layers100.9 × 77.5 mmYm2610-pcb, the printed circuit board in 3D

    Ym2610-pcb

    dan-rodrigues/ym2610-pcb

    FPGA-based PCB to control a YM2610 sound synthesis chip.

    168 parts31
  • 2 layers127 × 76.2 mmHx8k brk mem, the printed circuit board in 3D

    Hx8k brk mem

    msinger/iceboy

    Game Boy clone for Lattice iCE40 FPGAs

    23 parts26
  • 2 layers56 × 91 mmTcbm2sd, the printed circuit board in 3D

    Tcbm2sd

    ytmytm/plus4-tcbm2sd

    CBM 1551 paddle replacement / mass storage using an SD card interfacing with the Commodore C16/116/Plus4 simulating a TCBM bus 1551 disk drive

    27 parts19
  • 2 layers53 × 72 mmIpod cf udma, the printed circuit board in 3D

    Ipod cf udma

    dantidote/sphinxmoth

    FPGA interposer that makes flash storage fully work in FireWire iPods (1G/2G): CF or SD, restore, sync, playback. The UDMA-CRC ASIC/PLD that TI's TSB43AA82 reference design called for in 2001.

    32 parts18MIT
  • 2 layers99.1 × 40 mmZX BUS Mouse, the printed circuit board in 3D

    ZX BUS Mouse

    proboterror/ZX_BUS_Mouse

    ZX BUS Kempston Mouse Controller

    31 parts18
  • 4 layers110 × 55 mmPhloppy 0, the printed circuit board in 3D

    Phloppy 0

    piotr-wiszowaty/phloppy_0

    Commodore Amiga floppy drive emulator

    85 parts12GPL-3.0
  • 4 layers214.1 × 131.7 mmQsic, the printed circuit board in 3D

    Qsic

    dabridgham/QSIC-verilog

    QBUS Storage and I/O Card

    263 parts11
  • 4 layers175.6 × 122.1 mmA4092, the printed circuit board in 3D

    A4092

    A4091/A4092

    A4092 SCSI-2 Host Controller

    94 parts10
  • 6 layers124.5 × 135.4 mmMicroZed carrier board v4, the printed circuit board in 3D

    MicroZed carrier board v4

    viktor-nikolov/MicroZed-carrier-board

    MicroZed development carrier board

    116 parts7CC0-1.0
  • 4 layers91.4 × 102.9 mmFPGC4IOboard, the printed circuit board in 3D

    FPGC4IOboard

    bartpleiter/FPGC5

    A completely self designed (game) computer, implemented in hardware using an FPGA. Basically every component is self designed, from the ISA up to the PCB and software.

    150 parts6GPL-3.0
  • 4 layers140 × 140 mmFpgaboard, the printed circuit board in 3D

    Fpgaboard

    msinger/gbreveng

    Stuff for Gameboy reverse engineering and some documentation

    342 parts6
  • 2 layers33 × 19.5 mmQspi pmod adapter, the printed circuit board in 3D

    Qspi pmod adapter

    algofoogle/tt07-raybox-zero

    TT07 resub of tt04-raybox-zero "3D" VGA ray caster demo (like Wolf3D)

    12 parts4Apache-2.0
  • 4 layers65 × 40 mmHEXBERRY V-20Q100, the printed circuit board in 3D

    HEXBERRY V-20Q100

    logitiles/HEXBERRY-V-20Q100-0.91

    Open Hardware FPGA platform

    195 parts4CERN-OHL-S-2.0
  • 4 layers110 × 100 mmFidget, the printed circuit board in 3D

    Fidget

    transistorfet/fidget

    An FPGA board that can interface to the Computie expansion bus using an iCE40HX1K

    99 parts4GPL-3.0