Skip to the content

AVR

195 boards

KiCad boards from 102 GitHub repositories tagged “avr”, the most starred first; open any of them in PCBKit.

  • 2 layers85.6 × 54 mmBusiness card pcb, the printed circuit board in 3D

    Business card pcb

    roepkefeller/business-card-pcb

    A PCB business card that shows you your own pulse. Optical PPG sensor drives a ten-LED heart; NFC tag serves the vCard with the card switched off. ATtiny1616, MAX30102, CR2032.

    59 parts1
  • 2 layers31.8 × 36.8 mmHandbrake, the printed circuit board in 3D

    Handbrake

    StarGate01/Handbrake

    Firmware and Hardware for an analog handbrake game controller using an attiny85 and v-usb

    12 parts1
  • 2 layers100 × 80 mmTorqeedo pcb, the printed circuit board in 3D

    Torqeedo pcb

    antoinem01/torqeedo_motor

    Arduino sketch to control a Torqeedo electric outboard motor over RS485, with speed control and safety switches

    43 partsGPL-3.0
  • 2 layers68.6 × 53.3 mmH9uno, the printed circuit board in 3D

    H9uno

    c3h9dx/h9uno

    The Arduino Uno clone with a CAN bus support for the H9.

    30 parts
  • 2 layers50 × 50 mmSoldering Sponge Automatic Water Dispenser, the printed circuit board in 3D

    Soldering Sponge Automatic Water Dispenser

    EECSB/Soldering-Sponge-Automatic-Water-Dispenser

    ATtiny45-based device that keeps a soldering sponge moist automatically (3D-printed case + KiCad PCB + firmware).

    23 partsUnlicense
  • 2 layers109 × 48 mmIncidence meter, the printed circuit board in 3D

    Incidence meter

    eyalabraham/incidence-meter

    Incidence meter to measure airfoil angles on RC planes. The project uses an AVR ATMega328p, a set of seven segment LED modules, and an I2C accelerometer module.

    28 parts
  • 2 layers35.6 × 34.3 mmOpenscex, the printed circuit board in 3D

    Openscex

    gufranco/openscex-modchip

    Stealth SCEx region-unlock modchip firmware for PlayStation and PSone on an ATtiny85: internal oscillator trimmed against the console's SUBQ frame rate, one region per build, MISRA C:2012 clean, simulator- and…

    13 partsMIT
  • 4 layers17.8 × 43.2 mmFTNano, the printed circuit board in 3D

    FTNano

    HackableElectronics/FTNano

    Arduino Nano compatible development board

    38 partsGPL-3.0
  • 2 layers68.6 × 53.3 mmFTUno, the printed circuit board in 3D

    FTUno

    HackableElectronics/FTUno

    Arduino Uno R3 compatible development board

    60 partsGPL-3.0
  • 2 layers39.6 × 23.9 mmTester serw, the printed circuit board in 3D

    Tester serw

    ironiron/servo-tester

    Small servo tester designed for Attiny13a. Pulse width 0.5-2.5ms; 3 modes: oscillating, normal and neutrum.

    10 partsUnlicense
  • 2 layers145.2 × 87.1 mmMAS LINIE V4, the printed circuit board in 3D

    MAS LINIE V4

    janos-raul/lt_counter

    longitudinal counter using atmega1284p and esp32

    76 partsGPL-2.0
  • 2 layers28.4 × 41.7 mmBinaryClock, the printed circuit board in 3D

    BinaryClock

    JaredWright/BinaryClock

    A fully custom wall-mounted binary clock for the AIS Denver office

    20 parts
  • 2 layers148 × 98 mmLight box, the printed circuit board in 3D

    Light box

    kiu/lightdesk

    Custom desk light and RGB strip controller

    38 parts
  • 2 layers90 × 70 mmKapTesterV2, the printed circuit board in 3D

    KapTesterV2

    Lancarr8/KapTesterV2

    Capacitance Tester – ATmega328P based PCB project (AP2)

    41 parts
  • 2 layers76 × 45.2 mmMasjid2, the printed circuit board in 3D

    Masjid2

    Mahmoud1205/AthanLamp

    Hardware, software, and devlog of the Athan Lamp project.

    60 partsMIT
  • 2 layers20.3 × 20.3 mmKropelka, the printed circuit board in 3D

    Kropelka

    majkrzak/kropelka

    Fluid level ISM band radio sensor.

    4 parts
  • 2 layers18.5 × 33.3 mmArduino Pro Mini XL, the printed circuit board in 3D

    Arduino Pro Mini XL

    michpro/Arduino_Pro_Mini_XL

    ATmega1284P uC module in Arduino Pro Mini format

    21 partsCERN-OHL-P-2.0
  • 4 layers74 × 49.5 mmLight tracker dfm, the printed circuit board in 3D

    Light tracker dfm

    nmahadevan12/Light-Tracker

    Solo dual-axis light tracker on ATmega328P — MOSFET H-bridges, fixed-point Kalman, UART telemetry, 4-layer KiCad PCB.

    54 parts
  • 2 layers52 × 75 mmEsp avr, the printed circuit board in 3D

    Esp avr

    nskemish/esp-avr

    Za MacOS je potrebno uraditi u terminalu

    8 partsCERN-OHL-P-2.0
  • 4 layers99.9 × 99.9 mmSignal generator, the printed circuit board in 3D

    Signal generator

    Pejo-306/digital-function-generator-v2

    Цифров генератор на сигнали с тъчскрийн

    157 partsMIT
  • 2 layers170.2 × 108.6 mmIrrigator, the printed circuit board in 3D

    Irrigator

    peterbudai/irrigator

    Simple WiFi-enabled garden irrigation controller hardware

    45 partsMIT
  • 2 layers117 × 94.6 mm5x5x5 Led Cube, the printed circuit board in 3D

    5x5x5 Led Cube

    qb-creates/LedCube

    5x5x5 LED Cube using an ATmega32

    53 parts