
Bms
mandraga/SombreroBms
A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

The Arduino Uno clone with a CAN bus support for the H9.
H9uno is an open-source printed circuit board by c3h9dx, from the c3h9dx/h9uno repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 30 parts on 38 nets, routed with 465 tracks and 81 vias.
It is built around the ATMEGA32M1-AU, MCP2551-I/SN and LM7805CT, with the MCP1525-I/TT, S1A and NUP2105 among its other parts. Its parts include 15 capacitors, 5 ICs, 4 diodes, 2 resistors and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitors_SMD:C_1206_HandSoldering | C1, C3, C9, C12, C15 |
| 3 | 1u | Capacitors_SMD:C_1206_HandSoldering | C2, C10, C11 |
| 2 | 22p | Capacitors_SMD:C_1206_HandSoldering | C6, C8 |
| 2 | 47u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_Hand | C4, C5 |
| 2 | S1A | Diodes_SMD:SMA_Handsoldering | D3, D4 |
| 1 | 100u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_Hand | C14 |
| 1 | 100u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-D_EIA-7343-31_Hand | C13 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 10uH | Resistors_SMD:R_1210_HandSoldering | L1 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 4n7 | Capacitors_SMD:C_1206_HandSoldering | C7 |
| 1 | ATMEGA32M1-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U2 |
| 1 | Arduino_Uno_Shield | Arduino:Arduino_Uno_Shield | ARD1 |
| 1 | CAN | Connectors_Phoenix:PhoenixContact_MSTBVA-G_05x5.00mm_Vertical | J1 |
| 1 | LED_ALT | LEDs:LED_1206 | D1 |
| 1 | LM7805CT | TO_SOT_Packages_SMD:TO-263-3Lead | U5 |
| 1 | LP2985LV | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | MCP1525 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | U1 |
| 1 | MCP2551-I/SN | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | NUP2105 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D2 |

mandraga/SombreroBms
A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).


ananevego/ProjectFreeCad
Конвертер библиотечных footprint-файлов KiCad .kicadmod в самостоятельные библиотеки FreePCB2 .fpl. Написан на Python 3.10+, внешние зависимости не нужны.





klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the ATMEGA32M1-AU, MCP2551-I/SN, LM7805CT and MCP1525-I/TT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the c3h9dx/h9uno repository on GitHub, at the commit this page was made from: the board is h9uno.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask c3h9dx before reusing the design.