

Incidence meter
Incidence meter to measure airfoil angles on RC planes. The project uses an AVR ATMega328p, a set of seven segment LED modules, and an I2C accelerometer module.
- Size
- 109 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 65
- Pads
- 133
- Tracks, vias
- 286, 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Dec 2022
- Updated
- 17 Jan 2023
Overview
Incidence meter is an open-source printed circuit board by eyalabraham, from the eyalabraham/incidence-meter repository on GitHub. It is a 2-layer board of 109 × 48 mm with 28 parts on 65 nets, routed with 286 tracks and 1 via.
It is built around the ATMEGA328-PU, NTE1904 and PN3643, with the MPU-6050 among its other parts. Its parts include 13 resistors, 5 ICs, 3 transistors, 3 switches and 2 connectors. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)NTE1904
TO-220-40℃~+125℃ 1 16V 3.3V Fixed Over Current Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNTE ElectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPN3643
TO-92-3-55℃~+150℃ 1 NPN 100 220mV 30V 500mA 50nA 5V 625mW NPN Standalone TO-92-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
README
schematics/README.mdAVR ATMega328P incidence meter KiCAD schematic and PCB
This project implements an incidence meter to measure airfoil angles on RC planes. The project uses an AVR ATMega328p, a set of seven segment LED modules, and an I2C accelerometer module.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R13 |
| 3 | PN3643 | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2, Q3 |
| 2 | MAN71A | Display_7Segment:MAN71A | U3, U4 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 220uF / 10v | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Calibrate | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW3 |
| 1 | HOLD | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MAN73A | Display_7Segment:MAN73A | U2 |
| 1 | MPU-6050 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | NTE1904 | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | on/off | footprint-library:SPDT_MINIATURE_SLIDE_SW_PHILMORE_30-9185 | SW1 |
Similar boards
- 2 layers104.9 × 75.2 mm

- 2 layers228 × 98 mm

- 2 layers94.6 × 46.1 mm

- 2 layers50 × 50 mm

- 2 layers284.7 × 94.2 mm

Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm

- 2 layers285 × 117 mm

Questions
How big is the Incidence meter PCB?
It measures 109 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Incidence meter use?
28 parts, built around the ATMEGA328-PU, NTE1904, PN3643 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Incidence meter KiCad files?
From the eyalabraham/incidence-meter repository on GitHub, at the commit this page was made from: the board is schematics/incidence-meter.kicad_pcb and its schematic schematics/incidence-meter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Incidence meter design in my own project?
Its repository states no licence, so its author keeps all rights: ask eyalabraham before reusing the design.