

MAS LINIE V4
longitudinal counter using atmega1284p and esp32
- Size
- 145.2 × 87.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 67
- Pads
- 231
- Tracks, vias
- 561, 156
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Jan 2025
- Updated
- 5 Aug 2026
Overview
MAS LINIE V4 is an open-source printed circuit board by janos-raul, from the janos-raul/lt_counter repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 145.2 × 87.1 mm with 76 parts on 67 nets, routed with 561 tracks and 156 vias.
It is built around the ATMEGA1284P-AU, AMS1117-3.3 and L7805, with the ULN2803A and SM4001 among its other parts. Its parts include 24 capacitors, 18 resistors, 16 connectors, 7 diodes and 4 ICs. It belongs with the ESP32 and AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA1284P-AU
TQFP-44(10x10)-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysSM4001
DO-213AB-50℃~+175℃ 1 Independent 1.1V@1A 1A 44A 50V 5uA@50V DO-213AB Diodes - General Purpose ROHSDIOTECDiodes - General Purpose
README
README.mdlongitudinal counter
- esp32 dev board
- atmega1284p
- 20x4 LCD display
- JDY-41 transparent serial port radio module for comunication between the avr and esp32
- AHT15 temperature and humidity sensor
- SD-card for logging data and storing html files (also ftp available)
- 1 adc input for diameter measurment with GS 754B
- 1 counter input (ISR driven)
- 2 adc channels of 0-10v input converting to 0-100%
- 2 open colector outputs
- buzzer for alerts
- 24vcc supply voltage
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C6, C7, C10, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +1 |
| 10 | Conn_01x02_Socket | AVR_FOOTPRINT_Library:Degson 2p | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 |
| 7 | SM4001 | Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolder | D1, D3, D4, D5, D6, D7, D8 |
| 6 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13, R15, R16, R17, R18 |
| 3 | 1000/6.3 | Capacitor_SMD:C_Elec_8x10.2 | C8, C11, C12 |
| 3 | Conn_01x03_Socket | AVR_FOOTPRINT_Library:DEGSON 3P-3.5pitch | J12, J13, J14 |
| 3 | LOGO | AVR_FOOTPRINT_Library:egr-sigla | G***, G***, G*** |
| 2 | 22pf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_ACP_CA6-VSMD_Vertical | RV1 |
| 1 | 10nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 2200/25v | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C5 |
| 1 | 2k2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 3k3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 47 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | ATmega1284P-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J16 |
| 1 | Conn_01x14_Socket | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J15 |
| 1 | Conn_ISP | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | L7805 | AVR_FOOTPRINT_Library:D2PAK-STB35NF10T4 | U1 |
| 1 | LED_Dual_AAK | AVR_FOOTPRINT_Library:DEGSON 3P-3.5pitch | LED |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U4 |
| 1 | XTAL20Mhz | AVR_FOOTPRINT_Library:XTALSMD | Y1 |
Similar boards
- 2 layers346.7 × 116.8 mm

- 2 layers153.9 × 99.6 mm

- 4 layers200 × 100 mm

- 4 layers120 × 120 mm

- 2 layers82.5 × 93 mm

- 2 layers120.5 × 120.5 mm

- 2 layers90 × 120 mm

IPD Task 1
Executableexe/AVR-ATmega328P-Minimum-System-Design
PCB design using KiKad for the submission of task 1
37 parts - 2 layers120 × 120 mm

FAnaliDoshi E134 IPDTask01
fanalidoshi456-maker/AVR-microcontroller
PCB design using Atmega328P
37 parts
Questions
How big is the MAS LINIE V4 PCB?
It measures 145.2 × 87.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAS LINIE V4 use?
76 parts, built around the ATMEGA1284P-AU, AMS1117-3.3, L7805 and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAS LINIE V4 KiCad files?
From the janos-raul/lt_counter repository on GitHub, at the commit this page was made from: the board is Kikad/MAS_LINIE_V4.kicad_pcb and its schematic Kikad/MAS_LINIE_V4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAS LINIE V4 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).