Skip to the content
12

SM4001

DIOTECExtended

-50℃~+175℃ 1 Independent 1.1V@1A 1A 44A 50V 5uA@50V DO-213AB Diodes - General Purpose ROHS

Part id
diotec/SM4001
Category
Diodes, General Purpose
Package
DO-213AB
Pins
2
In stock
0 at JLCPCB (C212747)
Used on
20 open-source boards

Overview

The SM4001 is a diodes, General Purpose made by DIOTEC in a DO-213AB package with 2 pins. -50℃~+175℃ 1 Independent 1.1V@1A 1A 44A 50V 5uA@50V DO-213AB Diodes - General Purpose ROHS.

PCBKit's library has its KiCad symbol (Diode:SM4001, from KiCad's library) and its footprint (Diode_SMD:D_MELF, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C212747). 20 open-source boards in 19 repositories on GitHub use it.

Symbol

Diode:SM4001From KiCad's library

Footprint

12
Diode_SMD:D_MELFFrom KiCad's library

Pinout

2
The pins of the SM4001
PinNameType
1KPassive
2APassive

Open-source boards using it

20See all 20
  • 2 layers19 × 106 mmPetRockMain1, the printed circuit board in 3D

    PetRockMain1

    jsenzel1/petrock

    Eurorack components and footprints for KiCad.

    117 parts48
  • 2 layers109.4 × 108.5 mmQUAAD V1 1, the printed circuit board in 3D

    QUAAD V1 1

    mzourack/QUAAD

    quad 4-step Eurorack CV sequencer

    191 parts45
  • 2 layers49.5 × 106 mmSupra board, the printed circuit board in 3D

    Supra board

    jsenzel1/supra

    is multimode Eurorack module with 4 different experiments in long term time. you can run up to 2 modes at once. use the 4 way joystick and buttons to interact with the modes on the oled

    119 parts4
  • 2 layers89.8 × 55.6 mmC64-Pi Pico USB Keyboard, the printed circuit board in 3D

    C64-Pi Pico USB Keyboard

    baldengineer/C64-Pi-Pico-USB-Keyboard-Adapter

    Adapter to use serial/usb/wireless keyboard to type on C64

    49 parts3
  • 2 layersTR v0.1, the printed circuit board in 3D

    TR v0.1

    razvysme/Paisa-Soda

    A triple trigger delay for Eurorack systems.

    50 parts3CC0-1.0
  • 2 layers346.7 × 116.8 mmTeensyPoly41, the printed circuit board in 3D

    TeensyPoly41

    elephark/TeensyPoly41

    Hardware synth PCB using Teensy 4.1

    119 parts2
  • 2 layers153.9 × 99.6 mmControl mini, the printed circuit board in 3D

    Control mini

    eliasmonzon/kicad_mio

    64 parts1
  • 2 layers33.9 × 59.6 mmArduino Minimal Design, the printed circuit board in 3D

    Arduino Minimal Design

    SushantSaroch13/Arduino-Minimal-Design

    A minimal Arduino-compatible board built around the ATmega328P-M microcontroller with an integrated CH340E USB-to-Serial interface for direct programming via USB.

    41 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SM4001?

Yes. The symbol is Diode:SM4001 and the footprint Diode_SMD:D_MELF, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SM4001?

DO-213AB, with 2 pins. Its footprint is drawn on this page.

Where is the SM4001 datasheet?

DIOTEC publishes it: the Datasheet link on this page opens it.

Where can I order the SM4001?

JLCPCB lists it as part C212747, with 0 in stock; the sellers' links on this page open their listings.

What can replace the SM4001?

Parts like it in the library: the DL4007 by MDD, the DL4007 by FUXINSEMI, the SM4007 by YFW and the SM4007 by YONGYUTAI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SM4001?

20 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.