

IPD Task1
AVR Atmega328p chip schematic and pcb design
- Size
- 120.5 × 120.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 61
- Pads
- 192
- Tracks, vias
- 598, 25
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Mar 2026
- Updated
- 1 Mar 2026
Overview
IPD Task1 is an open-source printed circuit board by Ebrahim2101, from the Ebrahim2101/IPD-AVR-Board repository on GitHub. It is a 2-layer board of 120.5 × 120.5 mm with 37 parts on 61 nets, routed with 598 tracks and 25 vias.
It is built around the ATMEGA328-PU, AMS1117-3.3 and L7805, with the ULN2803A among its other parts. Its parts include 10 capacitors, 10 connectors, 5 ICs, 4 resistors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | C | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1, C2, C4, C5, C6, C9, C10 |
| 4 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | C_Small_US | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C3, C7, C8 |
| 3 | Conn_01x08 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBV_2,5_8-GF-7,62_1x08_P7.62mm_Vertical_ThreadedFlange_MountHole | J2, J5, J9 |
| 2 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J6, J10 |
| 2 | LED | LED_THT:LED_D8.0mm | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | SW1, SW2 |
| 2 | Screw_Terminal_01x02 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBV_2,5_2-GF-7,62_1x02_P7.62mm_Vertical_ThreadedFlange_MountHole | J7, J11 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x06 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBV_2,5_6-GF-7,62_1x06_P7.62mm_Vertical_ThreadedFlange_MountHole | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J3 |
| 1 | Crystal | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Vertical | Y1 |
| 1 | FerriteBead | Ferrite_THT:LairdTech_28C0236-0JW-10 | FB1 |
| 1 | L293 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | Screw_Terminal_01x06 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBV_2,5_6-GF-7,62_1x06_P7.62mm_Vertical_ThreadedFlange_MountHole | J8 |
| 1 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U2 |
Similar boards
- 4 layers120 × 120 mm

- 2 layers82.5 × 93 mm

- 2 layers120 × 120 mm

FAnaliDoshi E134 IPDTask01
fanalidoshi456-maker/AVR-microcontroller
PCB design using Atmega328P
37 parts - 4 layers117 × 113.8 mm

- 2 layers120 × 120 mm

- 2 layers63.5 × 64 mm

- 2 layers90 × 120 mm

IPD Task 1
Executableexe/AVR-ATmega328P-Minimum-System-Design
PCB design using KiKad for the submission of task 1
37 parts - 2 layers145.2 × 87.1 mm

Questions
How big is the IPD Task1 PCB?
It measures 120.5 × 120.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IPD Task1 use?
37 parts, built around the ATMEGA328-PU, AMS1117-3.3, L7805 and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IPD Task1 KiCad files?
From the Ebrahim2101/IPD-AVR-Board repository on GitHub, at the commit this page was made from: the board is IPD_Task1.kicad_pcb and its schematic IPD_Task1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IPD Task1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ebrahim2101 before reusing the design.