Skip to the content

ATMEGA328P

74 boards

KiCad boards from 53 GitHub repositories tagged “atmega328p”, the most starred first; open any of them in PCBKit.

  • 2 layers275.2 × 103.5 mmMain panel charger, the printed circuit board in 3D

    Main panel charger

    ZeniteSolar/MCS19

    Módulo de Carregamento do Sistema da embarcação solar Guarapuvu II (Zênite Solar)

    222 parts1GPL-3.0
  • 4 layers60 × 47 mmStepper controller, the printed circuit board in 3D

    Stepper controller

    abdallah-yasser/stepper-motor-controller-pcb

    4-layer KiCad PCB: Arduino-compatible stepper motor controller (ATmega328P + DRV8825)

    63 partsMIT
  • 2 layers65 × 100 mmSpeechRecogHardware, the printed circuit board in 3D

    SpeechRecogHardware

    AiwendilsCode/Arduino-speech-commands-recognition

    Implementation of neural network for recognizing speech commands on Arduino Nano.

    36 partsGPL-3.0
  • 2 layersPCB design, the printed circuit board in 3D

    PCB design

    andre-fajar-n/Motor-Speed-Controller

    Skill test for position Electrical Embedded Engineer in eFishery

    46 parts
  • 2 layers80 × 90 mmSST, the printed circuit board in 3D

    SST

    artsi0m/SST

    Мой диплом

    40 partsCERN-OHL-P-2.0
  • 2 layers68 × 44.6 mmCat Gate Controller v1.0, the printed circuit board in 3D

    Cat Gate Controller v1.0

    bgmbzk/Cat-Gate-Controller-v1.0

    ATmega328P based automated cat-gate controller with DRV8833 motor driver, designed in KiCad with a focus on high-current power management and noise reduction.

    18 parts
  • 2 layers94 × 56.3 mmRemote unit, the printed circuit board in 3D

    Remote unit

    danielmcmillan/irrigation-system

    Hardware and software for irrigation control and monitoring

    63 partsMIT
  • 4 layers64.6 × 55.2 mmWhisker, the printed circuit board in 3D

    Whisker

    HeyPCB/whisker

    Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.

    118 partsCERN-OHL-S-2.0
  • 2 layers70 × 120 mmMultimetre V2, the printed circuit board in 3D

    Multimetre V2

    hilham1990/Multimetre

    AkademiUsta Multimetre: ATmega328P + 16 bit ADS1115 ADC, OLED ekran ve Li-ion pil ile açık kaynak el multimetresi. KiCad 10 dosyaları, Gerber ve LCSC kodlu BOM. Kart henüz üretilmedi.

    86 parts
  • 2 layers98 × 99.5 mmOttolinkPCB, the printed circuit board in 3D

    OttolinkPCB

    Jackhammer9/Ottolink

    4-DoF anthropomorphic robotic manipulator

    41 parts
  • 2 layers82.8 × 53.3 mmServoBoard V21, the printed circuit board in 3D

    ServoBoard V21

    jeffrey500/ServoBoard

    A custom PCB that drives up to 4 PWM servos. The board uses the atmega328PB and has variable input and variable servo voltage using the LM2596S buck and AMS1117 LDO. The board also has 3 6n137 optocouplers.

    70 parts
  • 2 layers90 × 70 mmKapTesterV2, the printed circuit board in 3D

    KapTesterV2

    Lancarr8/KapTesterV2

    Capacitance Tester – ATmega328P based PCB project (AP2)

    41 parts
  • 2 layers120 × 70 mmSMART THERMOSTAT, the printed circuit board in 3D

    SMART THERMOSTAT

    leo-recover/domotics

    A simple domotics system using Raspberry-Pi, several smart nodes, and radio modules

    64 partsMIT
  • 2 layers46.5 × 19.6 mmArduino nano custom board, the printed circuit board in 3D

    Arduino nano custom board

    marwantm/arduino-nano-custom-board

    Custom 2-layer Arduino Nano clone built around the ATmega328P.

    37 parts
  • 4 layers44.2 × 71.1 mmSFP-32 Clampshell, the printed circuit board in 3D

    SFP-32 Clampshell

    MichalVarsanyi/TQFP-32-Clampshell

    Clampshell is a device used for programming SMD packaged integrated circuits. It makes a connection to all the pins without the need for soldering.

    20 partsMIT
  • 2 layers83.8 × 73.7 mmPayload pcb, the printed circuit board in 3D

    Payload pcb

    nleve/bacon

    Balloon Ascent Controller - CE Senior Project

    43 partsMIT
  • 4 layers74 × 49.5 mmLight tracker dfm, the printed circuit board in 3D

    Light tracker dfm

    nmahadevan12/Light-Tracker

    Solo dual-axis light tracker on ATmega328P — MOSFET H-bridges, fixed-point Kalman, UART telemetry, 4-layer KiCad PCB.

    54 parts
  • 2 layers92.1 × 99.4 mmPower Gauge PCB, the printed circuit board in 3D

    Power Gauge PCB

    oct-karim/Mini-Power-Gauge

    A mini power gauge that mesures current and voltage.

    54 parts
  • 4 layers124 × 89.4 mmATMega 328 PU Board, the printed circuit board in 3D

    ATMega 328 PU Board

    olexsu/ATmega328_control_Board

    Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.

    140 parts
  • 2 layers21.6 × 80.6 mmFireFly, the printed circuit board in 3D

    FireFly

    rjhsun/FireFly

    Open source ATmega8 target board

    41 parts
  • 4 layers60 × 60 mmATmega TMC2209 Driver, the printed circuit board in 3D

    ATmega TMC2209 Driver

    sbbxiii/The-Armadillo

    The Armadillo: Custom Arduino-compatible ATmega328P stepper motor controller PCB with Trinamic TMC2209 silent driver and single-wire UART

    52 partsMIT
  • 2 layers80 × 60 mmSmart grid fault detector, the printed circuit board in 3D

    Smart grid fault detector

    shawnsony07/smart-grid-fault-detector

    An ATmega328P-based smart grid fault detector featuring high-side current sensing via INA180A1 and voltage monitoring.

    39 parts
  • 2 layers113 × 113.2 mm8bit quad fc, the printed circuit board in 3D

    8bit quad fc

    VasilKalchev/8bit-quad.hw

    Flight controller PCB for a custom-built quadcopter based on the ATmega328 microcontroller.

    66 partsCERN-OHL-P-2.0
  • 2 layers199.1 × 127.5 mmMcc18, the printed circuit board in 3D

    Mcc18

    ZeniteSolar/MCC18

    A modular MPPT using Ćuk converter designed for a Solar Boat

    89 partsGPL-3.0