2 layers87 × 47 mm
ATMEGA328P
74 boardsKiCad boards from 53 GitHub repositories tagged “atmega328p”, the most starred first; open any of them in PCBKit.
- 2 layers149.2 × 83.7 mm
Nodo BMS 1 1
AugustoS97/BMS-BatterySystem
Repositorio con el diseño de un BMS y una batería como TFM
117 parts7GPL-3.0 - 2 layers119.6 × 123.9 mm
Cpc6128 rom board
bmpc/amstrad_cpc6128_romboard
A ROM Board for the Amstrad CPC 6128 capable of loading two expansion ROMs simultaneously from an SD card.
44 parts6 - 2 layers57.4 × 66.3 mm
- 2 layers70.1 × 32 mm
Senior Design Power PCB
LewisCollum/frostAV
From an almost fully 3D printed chassis, to sign detection using Yolo, FrostAV provides a broad and multifaceted source of inspiration for your own autonomous vehicle project.
16 parts5MIT - 2 layers
- 2 layers30.5 × 22.5 mm
Retro Bubble LED Watch
xJacksee/Retro_Bubble_LED_Watch
Retro wrist watch built with ATMega328PB uC and HP 5082-7415 obsolete LED 7-segment display
24 parts3MIT - 4 layers92 × 48.7 mm
ATMega Board
DoImant/KiCad-ATMega-Board
ATMega Barebone PCB. Applicable for battery powered applications. Usable microcontrollers: ATTiny88, ATmega48A/PA, 88A/PA, 168A/PA, 328/P
29 parts2CC-BY-SA-4.0 - 2 layers94.5 × 67.6 mm
AtmegaStepperDriver
eGuardianDev/atmegaStepperDriver
Open source stepper driver powered by atmega328p chip. First prototype designed for used in 3D printer.
102 parts2GPL-3.0 - 2 layers143.5 × 64.8 mm
- 2 layers74.9 × 48.3 mm
- 2 layers29.2 × 52.7 mm
- 2 layers73 × 48 mm
Berg wire jumper extender
nandanghawate/arduino-atmega328-custom-hw-sw-projects-NG
This will be / is the collection of sample circuits, PCB layouts, codes and libraries that I will create during the process of exploring ATMEGA328, Arduino - Uno, Nano, Mini
19 parts2 - 2 layers61 × 51 mm
Avr irremote led lamp
QuintusJoyal/avr-irremote-led-lamp
the signals on the bus go blink, blink, blink
29 parts2 - 2 layers86.4 × 59.7 mm
Omnichord
rootmeanclaire/avr-omnichord
An Omnichord-style MIDI controller written for the ATmega328P using a PS/2 keyboard for input
12 parts2GPL-3.0 - 2 layers62.5 × 61.5 mm
Jeden board
Wojtekb30/Jeden-board
KiCad hardware project. A ATMega328P-based development board with Arduino Uno's functionality.
29 parts2 - 2 layers170.2 × 119.4 mm
Sentinel
YousefAliAicha/sentinel-arduino-firmware
Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.
25 parts2MIT - 2 layers239.3 × 121.3 mm
- 2 layers60 × 63 mm
ATMEGA328P AU BASE CYUSB v1.0
kgsully/MCU.ATMEGA328P-AU-Base
Base Schematic and PCB for ATMEGA328P-AU w/ USB-UART Bridge
52 parts1 - 2 layers60 × 70 mm
- 2 layers100.1 × 54.7 mm
BinLora
manasdas17/LoRa-SmartGarbageCollection
Deploying smart garbage bins for real time waste management system is one of the key applications of a smart city system.
38 parts1 - 2 layers56.9 × 45 mm
TempLoggerNG
miree/tempLoggerNG
Four channel pt-100 temperature logging device using an ADS1248 and an ATMEGA328p with V-USB
29 parts1GPL-2.0 - 2 layers273.9 × 208.8 mm
Placa todo en uno
NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ
Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).
50 parts1 - 2 layers46.5 × 65 mm
SAN PCB
SyedIhteshamuddin/All-Arduino-Projects
Embedded systems, PCB design, and electronics projects documenting my journey toward Electrical Engineering.
19 parts1