Skip to the content

Silicon Labs (EFR32, EFM) boards

163 boards
  • 4 layers50.9 × 20.5 mmThule, the printed circuit board in 3D

    Thule

    EnJens/thule

    36 parts
  • 2 layers41 × 34 mmKeychain, the printed circuit board in 3D

    Keychain

    EnJens/XilBadge

    Xil Hackerspace Opening Party Badge

    50 parts
  • 2 layersBAT2024, the printed circuit board in 3D

    BAT2024

    Froster2406/BAT2024

    49 parts
  • 2 layers29 × 33 mmPeugeot auto, the printed circuit board in 3D

    Peugeot auto

    ghostwritter91/Remote_control_2.4GHz

    Remote control based on EFM32ZG110F32 and NRF24

    33 parts
  • 4 layers210.7 × 85 mmTripSitter, the printed circuit board in 3D

    TripSitter

    Henryen-cyber/Datamskinprosjekt

    Hex for MCU are packaged in the Github releases.

    194 parts
  • 2 layers74.5 × 40 mmMain Bike Print, the printed circuit board in 3D

    Main Bike Print

    IoT-Systems-Lab/Smart-Bike

    This repository contains the work for our Smart Bike project, part of the university IoT lab. The goal is to design a lightweight, low-power system that collects and transmits sensor data from a bicycle in real time —…

    128 parts
  • 2 layers35 × 14 mmDongle, the printed circuit board in 3D

    Dongle

    iTeleTram/dongle_hw

    USB to DCC dongle hardware schematics for KiCad

    39 partsApache-2.0
  • 2 layers58.7 × 53.7 mmCW312T EFR32MG21A, the printed circuit board in 3D

    CW312T EFR32MG21A

    jmercerr/CW312T-EFR32MG21

    design transfer project from cw308t to cw312t form for EFR32MG21 target board

    22 parts
  • 6 layers102.6 × 62.6 mmSPANNUNG BLE 1, the printed circuit board in 3D

    SPANNUNG BLE 1

    joeheinz/Tensosense-Schem

    This is my personal design project...

    139 parts
  • 2 layersNoodle spawnling gecko, the printed circuit board in 3D

    Noodle spawnling gecko

    kitspace-forks/noodle-spawnling-gecko

    A brain board for a noode spawnling from spetku based on Silicon Labs uC EFM32HG309

    23 parts
  • 4 layers75.6 × 100 mmFlight log, the printed circuit board in 3D

    Flight log

    knivier/SkyCell

    The telecommunications solution on a balloon...for broke people alike.

    208 partsMIT
  • 4 layers96.5 × 96.5 mmEsc-1s frame, the printed circuit board in 3D

    Esc-1s frame

    kokjo/esc-1s-frame

    FPV Drone ESC, With PCB as FRAME ================================

    110 parts
  • 6 layers40 × 40 mmDragonfangFC, the printed circuit board in 3D

    DragonfangFC

    Kozma04/dragonfang-fc

    190 parts
  • 2 layers29.4 × 10.2 mmEFM8 bug, the printed circuit board in 3D

    EFM8 bug

    kubabuda/EFM8_bug

    Small breakout board, to comfortably use EFM8BB01F8G and try out USB-C pcb connector

    12 parts
  • 6 layers255 × 147 mmKule pcb, the printed circuit board in 3D

    Kule pcb

    Kule-Racing-Spill/kule-pcb

    This repo contains the PCB design files

    168 parts
  • 2 layers28 × 13.5 mmPcb blheli s, the printed circuit board in 3D

    Pcb blheli s

    kyuhyong/blheli_hw

    27 parts
  • 4 layers52.7 × 61.5 mmAhriman, the printed circuit board in 3D

    Ahriman

    matt001k/Ahriman

    DSP Board for Signal Manipulation

    112 parts
  • 6 layers197.5 × 107.7 mmMicroHard, the printed circuit board in 3D

    MicroHard

    MH-Flight-Simulator-X/PCB

    193 parts
  • 2 layers28 × 36 mmEfr32-module breakout, the printed circuit board in 3D

    Efr32-module breakout

    ntn888/efr32_breakout

    Mini breakout for ZYZBP008 Modoule housing an EFR32MG21A020F768IM32. See efr32-module-breakout dir for current. The other dir is an early version with Tuya ZS3L.

    12 parts
  • 2 layers107.5 × 62 mmController efm32hg308, the printed circuit board in 3D

    Controller efm32hg308

    OpenScienceTools/DI-Lambda

    DI-Lambda spectrophotometer

    43 parts
  • 2 layers58.5 × 47 mmCurtainOpeners, the printed circuit board in 3D

    CurtainOpeners

    OpenSource-HomeProjects/curtain-openers-host-pcb

    PCB and Schematics for the Curtain Openers Host Device

    36 parts