

BAT2024
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 56
- Pads
- 179
- Tracks, vias
- 395, 118
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Feb 2024
- Updated
- 18 Jun 2024
Overview
BAT2024 is an open-source printed circuit board by Froster2406, from the Froster2406/BAT2024 repository on GitHub. It is a 2-layer board with 49 parts on 56 nets, routed with 395 tracks and 118 vias.
It is built around the BGM220PC22WGA2R, MIC5504-3.3YM5 and JS102011SAQN, with the SSM3J334R,LF and USB4125-GF-A among its other parts. Its parts include 11 resistors, 10 capacitors, 9 diodes, 5 ICs and 2 connectors. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
5BGM220PC22WGA2R
SMD-31P8dBm EFR32BG22 Chip SPI、UART、I2S、I2C、USART SMD-31P Bluetooth Modules ROHSSilicon LabsBluetooth ModulesMIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsJS102011SAQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 6V 9mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide SwitchesSSM3J334R,LF
SOT-23F1 P-Channel 136mΩ@4V 1W 280pF 2V 30V 40pF 4A 5.9nC@10V 55pF P-Channel SOT-23F MOSFETs ROHSToshibaMOSFETsUSB4125-GF-A
SMD-30℃~+85℃ 1 3A 48V 6P Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdBAT2024
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6, R7, R8, R9, R10, R11 |
| 8 | LED_XZCM2CRK53WA-8VF | BAT_Footprint-Library:LEDM168X110N | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C7, C8 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H4 |
| 2 | 0.47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | +3V3 | BAT_Footprint-Library:TestPoint_Pad_D1.0mm | TP3 |
| 1 | +BATT | BAT_Footprint-Library:TestPoint_Pad_D1.0mm | TP2 |
| 1 | BGM220PC22WGA2R | BAT_Footprint-Library:BGM220PC22WGA2R | IC1 |
| 1 | BQ21040DBVR | BAT_Footprint-Library:BatteryManagement_SOT95P280X145-6N | U2 |
| 1 | BatteryHolder_1025-7 | BAT_Footprint-Library:BatteryHolder_10257 | H1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | EEPROM_M95P16-IXMNT_E | BAT_Footprint-Library:EEPROM_SOIC127P600X175-8L | IC2 |
| 1 | GND | BAT_Footprint-Library:TestPoint_Pad_D1.0mm | TP4 |
| 1 | JS102011SAQN | BAT_Footprint-Library:C-K_Switch_JS102011SAQN | S1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LED-Driver_LP55231SQX_NOPB | BAT_Footprint-Library:LED-Driver-QFN50P400X400X80-25N | IC3 |
| 1 | Littlefuse_1210L020WR | BAT_Footprint-Library:Littlefuse_FUSC3226X100N | F1 |
| 1 | MEMS-Microphone_ICS-41351 | BAT_Footprint-Library:MEMS-Mikrofon_ICS41351 | MK1 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SSM3J334R,LF | BAT_Footprint-Library:SSM3J334RLF | Q1 |
| 1 | USB4125-GF-A | BAT_Footprint-Library:USB4125GFA | J1 |
| 1 | VCC | BAT_Footprint-Library:TestPoint_Pad_D1.0mm | TP1 |
More from Froster2406/BAT2024
2- 2 layers45.4 × 12.1 mm

- 2 layers12.9 × 15 mm

Similar boards
- 2 layers100 × 100 mm

Vhf am tx
ayumu-bekki/vhf-am-tx
Seeed Studio XIAO ESP32C6 を用いた 144MHz帯 終段ドレイン変調 AM(A1A / A2A / A3E)送信機プロジェクト。 ARDF(アマチュア無線方向探知)用のフォックスハンティング送信機(A2A)、手動キーのCW送信機(A1A)、および音声AM送信機(A3E)として動作します。
157 partsCERN-OHL-P-2.0 - 4 layers60 × 102 mm

Anthracite top
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
222 parts5CERN-OHL-S-2.0 - 2 layers59.2 × 59.2 mm

- 4 layers40 × 70 mm

DAQv3 5
TPierceUCSD/Wireless-motion-capture-data-sycnhronization-system
© 2025 Taylor Pierce, Emerson Noble, Lucas Davis, Jesus Wilkins, Kenneth J. Loh. Licensed under CC BY 4.0.
54 parts - 4 layers65 × 30 mm

Soleil
protolux-electronics/soleil_hardware
Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi
81 parts22CERN-OHL-P-2.0 - 2 layers94.8 × 67.2 mm

- 2 layers59 × 20 mm

- 2 layers61 × 24.9 mm

PS2-PSU
LegendOfRock69/PS2-PSU
A power supply unit for an advanced trimmed SCPH-7900X Model Playstation 2 Slim
47 parts3
Questions
What parts does the BAT2024 use?
49 parts, built around the BGM220PC22WGA2R, MIC5504-3.3YM5, JS102011SAQN and SSM3J334R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BAT2024 KiCad files?
From the Froster2406/BAT2024 repository on GitHub, at the commit this page was made from: the board is Hardware/V1-2/BAT2024.kicad_pcb and its schematic Hardware/BAT2024.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BAT2024 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Froster2406 before reusing the design.