
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Efr32bg breakout is an open-source printed circuit board by ntn888, from the ntn888/efr32bg_breakout repository on GitHub. It is a 2-layer board of 22 × 35 mm with 12 parts on 25 nets, routed with 164 tracks and 5 vias.
It is built around the E104-BT53A3. Its parts include 4 resistors, 3 connectors, 2 diodes, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards and the Silicon Labs (EFR32, EFM) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J3 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | E104-BT53A3 | efr32bg_breakout_stuff:E104-BT53A3_module | U1 |
| 1 | SW_Push | efr32bg_breakout_stuff:SW_SPST_TS-1088-AR02016 | SW1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 22 × 35 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the E104-BT53A3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ntn888/efr32bg_breakout repository on GitHub, at the commit this page was made from: the board is efr32bg_breakout.kicad_pcb and its schematic efr32bg_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ntn888 before reusing the design.