2 layers47 × 39 mm
Peugeot odbiornik
ghostwritter91/Remote_control_2.4GHz
Remote control based on EFM32ZG110F32 and NRF24
29 parts
2 layers29 × 33 mm
Peugeot auto
ghostwritter91/Remote_control_2.4GHzRemote control based on EFM32ZG110F32 and NRF24
- Size
- 29 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 27
- Pads
- 119
- Tracks, vias
- 450, 116
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Oct 2017
- Updated
- 31 Oct 2017
Overview
Peugeot auto is an open-source printed circuit board by ghostwritter91, from the ghostwritter91/Remote_control_2.4GHz repository on GitHub. It is a 2-layer board of 29 × 33 mm with 33 parts on 27 nets, routed with 450 tracks and 116 vias.
It is built around the EFM32ZG110F32-QFN24T, NRF24L01 and LP2989DGK, with the SI2300DS among its other parts. Its parts include 11 capacitors, 8 resistors, 4 ICs, 2 diodes and 2 transistors. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
4
EFM32ZG110F32-QFN24T
QFN-24-EP(5x5)-40℃~+85℃ 1.98V~3.8V 17 24MHz 32 Bit 32KB 4KB ARM Cortex-M0+ Built-in FLASH QFN-24-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSilicon LabsMicrocontrollers (MCU/MPU/SOC)
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICsLP2989DGK
UncategorisedTexas Instruments
SI2300DS
SOT-23-3(TO-236-3)-55℃~+150℃ 1 N-channel 1.1W 1.5V 19pF 3.6A 30V 320pF 6.5nC@10V 68mΩ@4.5V SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.md- Remote control using EFM32ZG110F32-QFN24T and NRF24L01
- PCBs for receiver and transmitter in KiCAD.
- Software projects in Simplicity Studio v3.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | CNSN_RLC_SMD:CNSN_C_0402 | C5, C6, C7, C8, C9, C10, C11 |
| 3 | 10K | CNSN_RLC_SMD:CNSN_C_0402 | R4, R5, R8 |
| 2 | 330R | Resistors_SMD:R_0603_HandSoldering | R2, R3 |
| 2 | 4K7 | CNSN_RLC_SMD:CNSN_C_0402 | R6, R7 |
| 2 | Si2300DS | SOT-23 | Q1, Q2 |
| 2 | TP-1198 | switches:TP-1198_4.5x4.5x0.55mm | SW1, SW2 |
| 1 | 10nF/16V | CNSN_RLC_SMD:CNSN_C_0402 | C1 |
| 1 | 12V | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | W1 |
| 1 | 1uF | CNSN_RLC_SMD:CNSN_C_0402 | C4 |
| 1 | 2.2uF/25V | CNSN_RLC_SMD:CNSN_C_0402 | C2 |
| 1 | 330K | Resistors_SMD:R_0805 | R1 |
| 1 | 4.7uF/10V | CNSN_RLC_SMD:CNSN_C_0402 | C3 |
| 1 | BAT-85 30V/200mA | Diodes:DO-34_(SOD68) | D2 |
| 1 | BLM15AG100SZ1D | CNSN_RLC_SMD:CNSN_L_0402 | L1 |
| 1 | EFM32ZG110F32-QFN24T | QFN:QFN-24-1EP_5x5mm_Pitch0.65mm | U3 |
| 1 | GND | Measurement_Points:Measurement_Point_Square-SMD-Pad_Small | W2 |
| 1 | LP2989 | VSSOP:VSSOP8 | U2 |
| 1 | Led_Bicolor_Common_Catode | LEDs:LED_3ARG9HWA | D1 |
| 1 | Mounting_Hole_M5 | Mounting_Holes:MountingHole_5.3mm_M5 | M1 |
| 1 | NRF24L01 | NRF:NRF24L01 | U1 |
| 1 | SWD_Simplified | CNSN_Connectors:CNSN_SWD_SimplifiedConnector(pitch1.27) | U4 |
More from ghostwritter91/Remote_control_2.4GHz
1Similar boards
- 2 layers100 × 60 mm
Ppse-2021
thomasnonis/ppse-2021
This is the repository for SALMO, the Solar Azimuth and eLevation Motorized lOcator. It is a PCB used for driving a tracking solar panel system, using GPS location and a MPPT algorithm to maximise the incident power.
133 parts5 - 4 layers75 × 75 mm
USAN r0
alu-source/open_USAN
This project documents the software and hardware of an ultrasonic anemometer, created in cooperation between FH Aachen and DLR Göttingen
262 parts1 - 2 layers39.3 × 59.9 mm
- 2 layers75 × 50 mm
- 4 layers50 × 50 mm
Kamikaze drone
Prachannagven/stm32f765-facial-detection
A project built around the STM32F765VIT6 chip to perform basic facial detection and to act as a flight controller for a micro drone.
92 parts1 - 2 layers130 × 68 mm
- 2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers92.5 × 82.8 mm
Rifle and sensors
DAlexis/caustic-lasertag-system
Caustic project is a full-featured indoor and outdoor lasertag system
268 parts16
Questions
How big is the Peugeot auto PCB?
It measures 29 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Peugeot auto use?
33 parts, built around the EFM32ZG110F32-QFN24T, NRF24L01, LP2989DGK and SI2300DS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Peugeot auto KiCad files?
From the ghostwritter91/Remote_control_2.4GHz repository on GitHub, at the commit this page was made from: the board is PCBS/pilot/peugeot_auto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Peugeot auto design in my own project?
Its repository states no licence, so its author keeps all rights: ask ghostwritter91 before reusing the design.