Skip to the content
2 layers28 × 36 mmEfr32-module breakout, the printed circuit board in 3D

Efr32-module breakout

ntn888/efr32_breakout

Mini breakout for ZYZBP008 Modoule housing an EFR32MG21A020F768IM32. See efr32-module-breakout dir for current. The other dir is an early version with Tuya ZS3L.

Size
28 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
29
Pads
72
Tracks, vias
205, 3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Feb 2025
Updated
16 Feb 2025

Overview

Efr32-module breakout is an open-source printed circuit board by ntn888, from the ntn888/efr32_breakout repository on GitHub. It is a 2-layer board of 28 × 36 mm with 12 parts on 29 nets, routed with 205 tracks and 3 vias.

Its parts include 4 resistors, 3 connectors, 1 capacitor, 1 IC and 1 switch. It belongs with the interfaces and adapters boards and the Silicon Labs (EFR32, EFM) boards of this library.

README

README.md

efr32 Module Breakout

Mini breakout for ZYZBP008 Modoule housing an EFR32MG21A020F768IM32. See efr32-module-breakout dir for current. The other dir is an early version with Tuya ZS3L.

Parts

12
QtyValueFootprintReferences
21KResistor_SMD:R_0603_1608MetricR1, R3
2Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ2, J3
2LEDLED_SMD:LED_0603_1608MetricA00, PWR
10.1uFCapacitor_SMD:C_0603_1608MetricC1
110KResistor_SMD:R_0603_1608MetricR4
1330Resistor_SMD:R_0603_1608MetricR2
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ1
1SW_PushButton_Switch_SMD:SW_SPST_SKQG_WithoutStemSW1
1ZYZBP008local_Library:ZYZBP008_moduleU1

More from ntn888/efr32_breakout

1
  • 4 layers34 × 28 mmSl test, the printed circuit board in 3D

    Sl test

    ntn888/efr32_breakout

    Mini breakout for ZYZBP008 Modoule housing an EFR32MG21A020F768IM32. See efr32-module-breakout dir for current. The other dir is an early version with Tuya ZS3L.

    11 parts

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Efr32-module breakout PCB?

It measures 28 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Efr32-module breakout use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Efr32-module breakout KiCad files?

From the ntn888/efr32_breakout repository on GitHub, at the commit this page was made from: the board is efr32-module-breakout/efr32-module-breakout.kicad_pcb and its schematic efr32-module-breakout/efr32-module-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Efr32-module breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask ntn888 before reusing the design.