Skip to the content
2 layers58.5 × 47 mmCurtainOpeners, the printed circuit board in 3D

PCB and Schematics for the Curtain Openers Host Device

Size
58.5 × 47 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
50
Pads
162
Tracks, vias
357, 43
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 May 2026
Updated
15 May 2026

Overview

CurtainOpeners is an open-source printed circuit board by OpenSource-HomeProjects, from the OpenSource-HomeProjects/curtain-openers-host-pcb repository on GitHub. It is a 2-layer board of 58.5 × 47 mm with 36 parts on 50 nets, routed with 357 tracks and 43 vias.

It is built around the AP63200WU and DRV8871DDA. Its parts include 14 capacitors, 6 resistors, 4 ICs, 2 connectors and 2 switches. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.

Main components

2

Parts

36
QtyValueFootprintReferences
30.1 mFCapacitor_SMD:C_0805_2012MetricC2, C12, C13
310KResistor_SMD:R_0805_2012MetricR4, R5, R6
20.1 uFCapacitor_SMD:C_0805_2012MetricC3, C5
210 uFCapacitor_SMD:C_0805_2012MetricC1, C8
222 uFCapacitor_SMD:C_0805_2012MetricC6, C7
24.7 uHInductor_SMD:L_0805_2012MetricL1, L2
2SW_ReedConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalSW1, SW2
11.0 uFCapacitor_SMD:C_0805_2012MetricC11
110 pFCapacitor_SMD:C_0805_2012MetricC10
1100 pFCapacitor_SMD:C_0805_2012MetricC14
1100ufCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC4
110pFCapacitor_SMD:C_0805_2012MetricC9
1182kResistor_SMD:R_0805_2012MetricR3
132KResistor_SMD:R_0805_2012MetricR2
162kResistor_SMD:R_0805_2012MetricR1
1AP63200WUPackage_TO_SOT_SMD:TSOT-23-6U1
1Conn_01x05_PinConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ1
1Crystal_GND24_SmallCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1
1DRV8871DDAPackage_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalViasU2
1EFR32ZG23A020F512GM48-CRMyCustomFootprints:EFR32ZG23A020F512GM48-CRU4
1Motor_DCConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalM1
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutU3
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ2

The 32 most common of 36 parts.

Similar boards

  • 2 layers120.5 × 46 mmKampela E1, the printed circuit board in 3D

    Kampela E1

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    192 parts21GPL-3.0
  • 6 layers36 × 47.4 mmFpv findland esc, the printed circuit board in 3D

    Fpv findland esc

    juhtipuhti/fpv_findland_esc

    166 parts5GPL-3.0
  • 2 layers78.5 × 46 mmKampela G5, the printed circuit board in 3D

    Kampela G5

    Kalapaja/kampela-hardware

    Hardware design schematics and supplementary files for Kampela hardware signer

    198 parts5GPL-3.0
  • 4 layers41.5 × 24 mmFrmw dcin big, the printed circuit board in 3D

    Frmw dcin big

    a-little-wifi/frmw-dcin

    Barrel jack laptop power supply adapter module for framework laptops

    64 parts3
  • 4 layers200 × 100 mmProjekt Mechatronik DC AC, the printed circuit board in 3D

    Projekt Mechatronik DC AC

    DriveLink-HM/DriveLink

    A Variable Frequency Drive, designed and built for Projekt Mechatronik in SoSe26

    190 parts2GPL-3.0
  • 6 layers49.3 × 39.3 mmVoronToolheadPCB, the printed circuit board in 3D

    VoronToolheadPCB

    shxshxshxshx/VoronToolheadPCB

    USB Toolhead Board for Voron Stealthburner

    99 parts2GPL-3.0
  • 2 layers102 × 103 mmOhmsprint, the printed circuit board in 3D

    Ohmsprint

    Jockkoo/Ohmsprint-2026-4Digitalca

    Ohmsprint hackaton 2026. KiCad

    123 parts1
  • 4 layers120 × 46 mmTATAMI STM32-V2, the printed circuit board in 3D

    TATAMI STM32-V2

    AgustinPrietoValdez/competition-robots

    Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.

    115 partsMIT

Questions

How big is the CurtainOpeners PCB?

It measures 58.5 × 47 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CurtainOpeners use?

36 parts, built around the AP63200WU and DRV8871DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CurtainOpeners KiCad files?

From the OpenSource-HomeProjects/curtain-openers-host-pcb repository on GitHub, at the commit this page was made from: the board is CurtainOpeners.kicad_pcb and its schematic CurtainOpeners.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CurtainOpeners design in my own project?

Its repository states no licence, so its author keeps all rights: ask OpenSource-HomeProjects before reusing the design.