
Kampela H1
Kalapaja/kampela-hardware
Hardware design schematics and supplementary files for Kampela hardware signer

Hardware design schematics and supplementary files for Kampela hardware signer
Kampela G5 is an open-source printed circuit board by Kalapaja, from the Kalapaja/kampela-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 78.5 × 46 mm with 198 parts on 94 nets, routed with 904 tracks and 625 vias.
It is built around the EFM32PG23B200F512IM40-C, AP63200WU and AT25XE321D-UUN-T, with the TPS62171DSG, APS6404L-SQN-SN and LMV7271MF among its other parts. Its parts include 83 capacitors, 37 resistors, 9 diodes, 7 ICs and 7 connectors. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.

Kampela NFC Tag is used as a Kampela companion for direct NFC communication with a phone, while Kampela remains be completely passive device minimizing the transmittion of any RF signal even not changing the NFC receiver quality factor to communicate with a user smartphone.
A nice bonus of this approach is that the tag is the second security factor - Kampela doesn't work without the correct tag to prevent simple attacks.
Kampela NFC Tag is also poured into a transparent enclosure to protect it from the harsh environment and silent modification.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 47x16 | Capacitor_SMD:C_1210_3225Metric | C6, C10, C11, C13, C15, C17, C19, C58, C59, C60, C61, C62, C63, C64, C65, C66 +20 |
| 27 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +11 |
| 15 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C5, C20, C23, C25, C26, C32, C33, C35, C36, C37, C38, C40, C41, C42, C46 |
| 11 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R6, R17, R18, R23, R24, R25, R26, R27, R28, R29 |
| 7 | 4.7x25 | Capacitor_SMD:C_0603_1608Metric | C28, C43, C45, C49, C52, C53, C56 |
| 6 | 1x6.3 | Capacitor_SMD:C_0402_1005Metric | C34, C39, C50, C51, C55, C57 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R13, R20, R21, R34, R35 |
| 5 | 1x50 | Capacitor_SMD:C_0402_1005Metric | C47, C48, C54, C86, C87 |
| 4 | 100K | Resistor_SMD:R_0402_1005Metric | R5, R7, R40, R42 |
| 4 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3, FID4 |
| 3 | , , | ||
| 3 | 100p | Capacitor_SMD:C_0402_1005Metric | C2, C3, C27 |
| 3 | 22x6.3 | Capacitor_SMD:C_0603_1608Metric | C29, C30, C31 |
| 3 | 52.3K | Resistor_SMD:R_0402_1005Metric | R2, R3, R16 |
| 3 | BAT54WS | Diode_SMD:D_SOD-323F | D2, D7, D10 |
| 3 | E_ANT | MyLib:TestPoint_Pad_2.4x3.5mm | J1, J2, J8 |
| 3 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R30, R33 |
| 2 | 10x16 | Capacitor_SMD:C_0603_1608Metric | C22, C24 |
| 2 | 150K | Resistor_SMD:R_0402_1005Metric | R12, R14 |
| 2 | 2.2 | Resistor_SMD:R_0603_1608Metric | R10, R32 |
| 2 | 47 | Capacitor_SMD:C_0603_1608Metric | C12, C14 |
| 2 | 470K | Resistor_SMD:R_0402_1005Metric | R19, R31 |
| 2 | 47K | Resistor_SMD:R_0402_1005Metric | R4, R41 |
| 2 | BLM15AG102SZ1D | Inductor_SMD:L_0402_1005Metric | FB1, FB3 |
| 2 | BLM18KG102SN1D | Inductor_SMD:L_0603_1608Metric | FB2, FB4 |
| 2 | SSM6N35AFE | Package_TO_SOT_SMD:SOT-563 | Q3, Q4 |
| 2 | SolderJumper_2_Open | MyLib:SolderJumper_0.8.x1mm | JP1, JP11 |
| 1 | D3Z13BF-7 | Diode_SMD:D_SOD-323F | D5 |
| 1 | 0.1 | Capacitor_SMD:C_0402_1005Metric | C44 |
| 1 | 0.47R | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 100 | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 10x25 | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 130K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 156125RG73000 | MyLib:SMD4_WL-SBRW-1205_REV-MOUNT_WRE | D4 |
| 1 | 15p | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 2.2uH | Inductor_SMD:L_Wuerth_MAPI-3015 | L2 |
| 1 | 3.3uH | Inductor_SMD:L_Wuerth_MAPI-3015 | L1 |
| 1 | 39MHz | MyLib:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 976K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | AP63200WU | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | APS6404L-SQN | MyLib:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm | U4 |
| 1 | AT25XE321D-UUN-T | MyLib:WLCSP 12-ball 3 x 2 x 3 Array | U5 |
| 1 | BAS70-04W | Package_TO_SOT_SMD:SOT-323_SC-70 | D9 |
| 1 | BAS70WS | Diode_SMD:D_SOD-323F | D6 |
| 1 | BC846BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q9 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J7 |
| 1 | Conn_01x08 | MyLib:PinHeader_1x08_P1.27mm_Vertical | J6 |
| 1 | D3Z5V1BF-7 | Diode_SMD:D_SOD-323F | D8 |
| 1 | E2154CS0C1 | MyLib:GDEY027T91-T01_bended | J4 |
| 1 | EFM32PG23B200F512IM40 | MyLib:QFN-40_EP_5x5_Pitch0.4mm | U6 |
| 1 | FC2012AN | MyLib:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | LMV7271 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NR3015T100M | Inductor_SMD:L_Wuerth_MAPI-3015 | L3 |
| 1 | NTR5105PT1G | Package_TO_SOT_SMD:SOT-23 | Q8 |
| 1 | NX138BKWX | Package_TO_SOT_SMD:SOT-323_SC-70 | Q5 |
| 1 | PMF250XNEX | Package_TO_SOT_SMD:SOT-323_SC-70 | Q2 |
| 1 | SB0603WC01-RG | MyLib:LED_DUAL_0603 | D12 |
| 1 | TOUCH | MyLib:HRS_FH34SRJ-6S-0.5SH(50) | J5 |
| 1 | TPS62171DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U3 |
| 1 | TXU0104PW | Package_DFN_QFN:Texas_R-PUQFN-N12 | U7 |

Kalapaja/kampela-hardware
Hardware design schematics and supplementary files for Kampela hardware signer

Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem

ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core


nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.




hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 78.5 × 46 mm and has 2 copper layers, 1.09 mm thick.
198 parts, built around the EFM32PG23B200F512IM40-C, AP63200WU, AT25XE321D-UUN-T and TPS62171DSG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kalapaja/kampela-hardware repository on GitHub, at the commit this page was made from: the board is Kampela_G5.kicad_pcb and its schematic Kampela.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).