Skip to the content
1234567891011121314

TXU0104PW

Texas InstrumentsExtended

-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHS

Part id
ti/TXU0104PW
Category
Translators, Level Shifters
Package
TSSOP-14
Pins
14
In stock
8,286 at JLCPCB (C2938871)
Used on
9 open-source boards

Overview

The TXU0104PW is a translators, Level Shifter made by Texas Instruments in a TSSOP-14 package with 14 pins. -40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHS.

PCBKit's library has its KiCad symbol (Analog & Interface:TXU0104PW, from CERN's library) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 8,286 are in stock at JLCPCB (part C2938871). 9 open-source boards in 5 repositories on GitHub use it.

Symbol

8OE2A13A24A35A41VCCA6NC7GND13B1Y12B2Y11B3Y10B4Y14VCCB9NC
Analog & Interface:TXU0104PWFrom CERN's library

Footprint

1234567891011121314
Package_SO:TSSOP-14_4.4x5mm_P0.65mmFrom KiCad's library

From the datasheet

15
Supply, least
1.08 V · VCCA, recommended operating, min · p. 6
Supply, most
5.5 V · VCCA, recommended operating, max · p. 6
Supply, least
1.08 V · VCCB, recommended operating, min · p. 6
Supply, most
5.5 V · VCCB, recommended operating, max · p. 6
Supply, absolute maximum
6.5 V · VCCA, absolute maximum · p. 5
Supply, absolute maximum
6.5 V · VCCB, absolute maximum · p. 5
Works from
-40 °C · TA, operating free-air temperature, min · p. 6
Works up to
125 °C · TA, operating free-air temperature, max · p. 6
Junction, hottest
150 °C · junction temperature, absolute maximum · p. 5
Takes working
6 µA · sum of ICCA and ICCB, unloaded, inputs at supply or GND, -40°C to 125°C, max · p. 9
A pin gives at most
25 mA · per output, continuous source or sink, absolute maximum · p. 5
Junction to air (PW)
135.8 K/W · junction to ambient · p. 6
Junction to board (PW)
78.8 K/W · junction to board · p. 6
Junction to case (PW)
65 K/W · junction to case, top · p. 6
Data rate, most
200 Mbit/s · max data rate, VCCI = 3.0–3.6 V, VCCO = 4.5–5.5 V, single channel switching · p. 10

Open-source boards using it

9See all 9
  • 4 layers51.4 × 60.6 mmGb rp2040 cart, the printed circuit board in 3D

    Gb rp2040 cart

    deltabeard/DBGC

    A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.

    67 parts57
  • 2 layers120.5 × 46 mmKampela E1, the printed circuit board in 3D

    Kampela E1

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    192 parts21GPL-3.0
  • 4 layers101.6 × 101.6 mmSbc, the printed circuit board in 3D

    Sbc

    dpicken/atari-hw

    Hardware for Atari 8-bit projects

    118 parts6MIT
  • 2 layers78.5 × 46 mmKampela G5, the printed circuit board in 3D

    Kampela G5

    Kalapaja/kampela-hardware

    Hardware design schematics and supplementary files for Kampela hardware signer

    198 parts5GPL-3.0
  • 4 layers55 × 65 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    Synthron/LogicAnalyzer

    Customized Hardware from https://github.com/gusmanb/logicanalyzer

    33 parts2
  • 2 layers90 × 38 mmKampela, the printed circuit board in 3D

    Kampela

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    156 parts21GPL-3.0
  • 2 layers115 × 46 mmKampela C1, the printed circuit board in 3D

    Kampela C1

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    171 parts21GPL-3.0
  • 2 layers76 × 46 mmKampela D1, the printed circuit board in 3D

    Kampela D1

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    185 parts21GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TXU0104PW?

Yes. The symbol is Analog & Interface:TXU0104PW and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TXU0104PW?

TSSOP-14, with 14 pins. Its footprint is drawn on this page.

Where is the TXU0104PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TXU0104PW?

JLCPCB lists it as part C2938871, with 8,286 in stock; the sellers' links on this page open their listings.

What can replace the TXU0104PW?

Parts like it in the library: the TXS0104EPW by Texas Instruments, the NXS0104PWJ by Nexperia, the TXB0104PW by Texas Instruments and the NXB0104PWJ by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TXU0104PW?

9 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.