
TXS0104EPW
Texas InstrumentsExtended
-40℃~+85℃ 1 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-14 Translators, Level Shifters ROHS
- Part id
- ti/TXS0104EPW
- Category
- Translators, Level Shifters
- Package
- TSSOP-14
- Pins
- 14
- In stock
- 45,595 at JLCPCB (C44955)
- Used on
- 17 open-source boards
Overview
The TXS0104EPW is a translators, Level Shifter made by Texas Instruments in a TSSOP-14 package with 14 pins. -40℃~+85℃ 1 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-14 Translators, Level Shifters ROHS.
PCBKit's library has its KiCad symbol (Logic_LevelTranslator:TXS0104EPW, from KiCad's library) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 45,595 are in stock at JLCPCB (part C44955). 17 open-source boards in 16 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
16- Supply, least
- 1.65 V · VCCA, recommended operating min · p. 9
- Supply, most
- 3.6 V · VCCA, recommended operating max · p. 9
- Supply, least
- 2.3 V · VCCB, recommended operating min · p. 9
- Supply, most
- 5.5 V · VCCB, recommended operating max · p. 9
- Supply, absolute maximum
- 4.6 V · VCCA, absolute max · p. 8
- Supply, absolute maximum
- 6.5 V · VCCB, absolute max · p. 8
- Works from
- -40 °C · TA, operating free-air min · p. 9
- Works up to
- 85 °C · TA, operating free-air max · p. 9
- Junction, hottest
- 150 °C · TJ, operating junction max · p. 8
- Takes working
- 14.4 µA · sum of ICCA and ICCB, open inputs and outputs, IO = 0, max · p. 10
- A pin gives at most
- 50 mA · IO, continuous output source or sink absolute max · p. 8
- Junction to air (PW)
- 120.1 K/W · junction-to-ambient thermal resistance · p. 10
- Junction to case (PW)
- 49.4 K/W · junction-to-case top thermal resistance · p. 10
- Junction to board (PW)
- 61.8 K/W · junction-to-board thermal resistance · p. 10
- Data rate, most
- 24 Mbit/s · push-pull max · p. 1
- Data rate, most
- 2 Mbit/s · open-drain max · p. 1
What it is and has
8- Function
- 4-bit bidirectional voltage level translator for open-drain and push-pull applications · p. 1
- Direction control
- No direction control signal required · p. 1
- Maximum data rate
- 24Mbps, push-pull · p. 1
- Maximum data rate
- 2Mbps, open-drain · p. 1
- Power sequencing
- Either VCCA or VCCB may ramp first · p. 1
- Package
- PW, TSSOP-14, 5mm × 6.4mm · p. 1
- IEC 61000-4-2 ESD
- B port, ±8kV contact discharge · p. 1
- IEC 61000-4-2 ESD
- B port, ±10kV air-gap discharge · p. 1
Specifications
49| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 电源电压 VCCA | min -0.5 · max 4.6 V | 8 | |
| 电源电压 VCCB | min -0.5 · max 6.5 V | 8 | |
| 输入电压 VI | A 端口 | min -0.5 · max 4.6 V | 8 |
| 输入电压 VI | B 端口 | min -0.5 · max 6.5 V | 8 |
| 应用到任一处于高阻抗或断电状态输出的电压范围 VO | A 端口 | min -0.5 · max 4.6 V | 8 |
| 应用到任一处于高阻抗或断电状态输出的电压范围 VO | B 端口 | min -0.5 · max 6.5 V | 8 |
| 应用到任一处于高电平或低电平状态输出的电压范围 VO | A 端口; maximum = VCCA + 0.5 | min -0.5 V | 8 |
| 应用到任一处于高电平或低电平状态输出的电压范围 VO | B 端口; maximum = VCCB + 0.5 | min -0.5 V | 8 |
| 输入钳位电流 IIK | VI < 0 | max -50 mA | 8 |
| 输出钳位电流 IOK | VO < 0 | max -50 mA | 8 |
| 持续输出电流 IO | min -50 · max 50 mA | 8 | |
| 流经每个 VCCA、VCCB 或 GND 的持续电流 | min -100 · max 100 mA | 8 | |
| 运行结温 TJ | max 150 °C | 8 | |
| 存储温度 Tstg | min -65 · max 150 °C | 8 | |
| 静电放电 V(ESD) | 人体放电模型 (HBM),符合 ANSI/ESDA/JEDEC JS-001,所有引脚; A 端口; ±2000 V | max 2000 V | 8 |
| 静电放电 V(ESD) | 人体放电模型 (HBM),符合 ANSI/ESDA/JEDEC JS-001,所有引脚; B 端口; ±15 kV | max 15 kV | 8 |
| 静电放电 V(ESD) | 充电器件模型(CDM),符合 JEDEC 规范 JESD22-C101,所有引脚; A 端口; ±1000 V | max 1000 V | 8 |
| 静电放电 V(ESD) | 充电器件模型(CDM),符合 JEDEC 规范 JESD22-C101,所有引脚; B 端口; ±1000 V | max 1000 V | 8 |
| 静电放电 V(ESD) | 机器模型 (MM); A 端口; ±200 V | max 200 V | 8 |
| 静电放电 V(ESD) | 机器模型 (MM); B 端口; ±200 V | max 200 V | 8 |
| 电源电压 VCCA | VCCA ≤ VCCB | min 1.65 · max 3.6 V | 9 |
| 电源电压 VCCB | VCCA ≤ VCCB | min 2.3 · max 5.5 V | 9 |
| 高电平输入电压 VIH | OE 输入; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V; minimum = VCCA × 0.65 | max 5.5 V | 9 |
| 低电平输入电压 VIL | A 端口 I/O; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | min 0 · max 0.15 V | 9 |
| 低电平输入电压 VIL | B 端口 I/O; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | min 0 · max 0.15 V | 9 |
| 低电平输入电压 VIL | OE 输入; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V; maximum = VCCA × 0.35 | min 0 V | 9 |
| 输入转换 上升或下降速率 Δt/Δv | A 端口 I/O 推挽驱动; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | max 10 ns/V | 9 |
| 输入转换 上升或下降速率 Δt/Δv | B 端口 I/O 推挽驱动; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | max 10 ns/V | 9 |
| 输入转换 上升或下降速率 Δt/Δv | 控制输入; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | max 10 ns/V | 9 |
| 自然通风工作温度 TA | min -40 · max 85 °C | 9 | |
| 结至环境热阻 RθJA | PW (TSSOP), 14 引脚 | typ 120.1 °C/W | 10 |
| 结至外壳(顶部)热阻 RθJC(top) | PW (TSSOP), 14 引脚 | typ 49.4 °C/W | 10 |
| 结至电路板热阻 RθJB | PW (TSSOP), 14 引脚 | typ 61.8 °C/W | 10 |
| 结至顶部特征参数 ψJT | PW (TSSOP), 14 引脚 | typ 6.2 °C/W | 10 |
| 结至电路板特征参数 ψJB | PW (TSSOP), 14 引脚 | typ 61.2 °C/W | 10 |
| 端口 A 输出 低电压 VOLA | IOL = 1mA; VIB ≤ 0.15V; TA = –40°C 至 85°C; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | max 0.4 V | 10 |
| 端口 B 输出 低电压 VOLB | IOL = 1mA; VIA ≤ 0.15V; TA = –40°C 至 85°C; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | max 0.4 V | 10 |
| 输入 漏电流 II | OE; VI = VCCI 或 GND; TA = 25°C; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | min -1 · max 1 uA | 10 |
| 输入 漏电流 II | OE; VI = VCCI 或 GND; TA = –40°C 至 85°C; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | min -2 · max 2 uA | 10 |
| 高阻抗状态 输出电流 IOZ | A 或 B 端口; OE = VIL; TA = 25°C; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | min -1 · max 1 uA | 10 |
| 高阻抗状态 输出电流 IOZ | A 或 B 端口; OE = VIL; TA = –40°C 至 85°C; VCCA = 1.65V 至 3.6V; VCCB = 2.3V 至 5.5V | min -2 · max 2 uA | 10 |
| VCCA 电源电流 ICCA | VI = VO = 开路; IO = 0; TA = –40°C 至 85°C; VCCA = 1.65V 至 VCCB; VCCB = 2.3V 至 5.5V | max 2.4 uA | 10 |
| VCCA 电源电流 ICCA | VI = VO = 开路; IO = 0; TA = –40°C 至 85°C; VCCA = 0; VCCB = 5.5V | max -1 uA | 10 |
| VCCB 电源电流 ICCB | VI = VO = 开路; IO = 0; TA = –40°C 至 85°C; VCCA = 1.65V 至 VCCB; VCCB = 2.3V 至 5.5V | max 12 uA | 10 |
| VCCB 电源电流 ICCB | VI = VO = 开路; IO = 0; TA = –40°C 至 85°C; VCCA = 3.6V; VCCB = 0 | max -1 uA | 10 |
| VCCB 电源电流 ICCB | VI = VO = 开路; IO = 0; TA = –40°C 至 85°C; VCCA = 0; VCCB = 5.5V | max 1 uA | 10 |
| 联合电源电流 ICCA + ICCB | VI = VO = 开路; IO = 0; TA = –40°C 至 85°C; VCCA = 1.65V 至 VCCB; VCCB = 2.3V 至 5.5V | max 14.4 uA | 10 |
| 输入电容 CI | OE; TA = 25°C; VCCA = 3.3V; VCCB = 3.3V | typ 2.5 pF | 10 |
| 输入电容 CI | OE; TA = –40°C 至 85°C; VCCA = 3.3V; VCCB = 3.3V | max 3.5 pF | 10 |
- 4 layers56.5 × 65 mm

- 4 layers219 × 108.5 mm

Z80DevBoard
gianluca-rainis/Z80DevBoard
An advanced development board for the Z80 microprocessor, powered by an RP2040.
182 parts7CERN-OHL-S-2.0 - 4 layers70.5 × 79.5 mm

M4 CAN Feather Carrier
2468shrm/M4_CAN_Feather_Carrier_v6
Sixth version of the M4 Feather CAN Express carrier board. Hopefully, "the last".
70 parts1 - 2 layers83.5 × 59 mm

ESP32Breakout
GadgetReboot/ESP32_5V_Dev_Board
ESP32 dev board with on board 3.3v to 5v buffers to some external pins, PT8211 I2S DAC, and Micro SD Card Socket
37 parts1 - 4 layers91 × 110 mm

Pico Robotic Controller
2468shrm/Pico-Robotic-Controller
A carrier board for a Raspberry Pi Pico (W) for use in FRC robotics. Similar to the XRP board.
103 parts - 4 layers80 × 80 mm

Telemetry
chithigun23/ANUFS-Telemetry
To use custom hardware to measure parameters and dynamics of an ICE Formula SAE car.
159 parts - 2 layers59.1 × 49.1 mm

Desktopia
Diabltica/Desktopia
Desktopia is an open-source project for easy height control of your IKEA Skarsta/Trotten sit-stand desk, providing a comfortable and customizable workspace experience
76 parts - 4 layers72.8 × 63 mm

Parts like it
8NXS0104PWJ
TSSOP-14-40℃~+125℃ 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Auto Direction Detection、Power-Off Protection Bidirectional TSSOP-14 Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersTXB0104PW
TSSOP-14-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional CMOS CMOS Tri-State TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersNXB0104PWJ
TSSOP-14-40℃~+125℃ 1.2V~3.6V 1.65V~5.5V 100Mbps 2 4 Auto Direction Detection、Power failure protection、输出使能高阻 Bidirectional Tri-State TSSOP-14 Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersTXU0304PW
TSSOP-14-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXU0104PW
TSSOP-14-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersLSF0204PW
TSSOP-14-40℃~+125℃ 1 1.8V~5.5V 4 800mV~4.5V Auto Direction Detection Bidirectional Push-Pull、Open-drain TTL TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXB0104QPWRQ1
TSSOP-14-40℃~+125℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Automatic direction detection、Power-off protection、Output enable high-impedance Bidirectional CMOS CMOS Level translator Tri-State TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersNXS0104PW-Q100J
TSSOP-14-40℃~+125℃ 1.65V~3.6V 2.3V~5.5V 24Mbps 4 Auto Direction Detection、Power-Off Protection Bidirectional Tri-State TSSOP-14 Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
Questions
Is there a KiCad symbol and footprint for the TXS0104EPW?
Yes. The symbol is Logic_LevelTranslator:TXS0104EPW and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TXS0104EPW?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the TXS0104EPW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TXS0104EPW?
JLCPCB lists it as part C44955, with 45,595 in stock; the sellers' links on this page open their listings.
What can replace the TXS0104EPW?
Parts like it in the library: the NXS0104PWJ by Nexperia, the TXB0104PW by Texas Instruments, the NXB0104PWJ by Nexperia and the TXU0304PW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TXS0104EPW?
17 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.