2 layers76 × 46 mm
Kampela D1
Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem
185 parts21GPL-3.0
2 layers120.5 × 46 mm
Kampela E1
Alzymologist/Kampela21Hardware signer and key storage for Substrate ecosystem
- Size
- 120.5 × 46 mm
- Copper layers
- 2
- Thickness
- 1.09 mm
- Parts
- 192
- Nets
- 103
- Pads
- 531
- Tracks, vias
- 832, 473
- Pours
- 524
- Routed
- Yes
- KiCad
- KiCad 7 (file 20230410)
- Created
- 18 Aug 2022
- Updated
- 16 Sep 2023
Overview
Kampela E1 is an open-source printed circuit board by Alzymologist, from the Alzymologist/Kampela repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 120.5 × 46 mm with 192 parts on 103 nets, routed with 832 tracks and 473 vias.
It is built around the EFM32PG23B200F512IM40-C, AP63200WU and AT25XE321D-UUN-T, with the TPS62171DSG, APS6404L-SQN-SN and LMV7271MF among its other parts. Its parts include 87 capacitors, 35 resistors, 10 diodes, 7 ICs and 7 connectors. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
12
EFM32PG23B200F512IM40-C
QFN-40(5x5)-40℃~+125℃ 1.71V~3.8V 29 32 Bit 512KB 64KB 80MHz ARM Cortex-M33 Built-in+External FLASH QFN-40(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSilicon LabsMicrocontrollers (MCU/MPU/SOC)
AP63200WU
TSOT-23-6-40℃~+85℃ 1 22uA 2A 3.8V~32V 500kHz Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
AT25XE321D-UUN-T
WLCSP-12(1.8x2.4)-40℃~+85℃ 1.65V~3.6V 100,000 cycles 104MHz 20 Years 24uA 32Mbit SPI WLCSP-12(1.8x2.4) NOR FLASH ROHSRenesas ElectronicsNOR FLASH
TPS62171DSG
WSON-8-EP(2x2)-40℃~+85℃@(TA) 1 1.8V 17uA 2.25MHz 3V~17V 500mA Buck Buck Built-in Fixed Yes WSON-8-EP(2x2) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
APS6404L-SQN-SN
SOP-8SOP-8 PSRAM ROHSAP MemoryUncategorised
LMV7271MF
SOT-23-5SOT-23-5 Comparators ROHSTexas InstrumentsComparators
TXU0104PW
TSSOP-14-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 200Mbps 4 Level translator Power-off protection、Output enable high-impedance、Integrated pull-up resistor Tri-State Unidirectional TSSOP-14 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
BAT54WS
SOD-3231 Independent 100mA 1V@100mA 2uA@25V 30V 600mA SOD-323 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
BAS70-04W
SOT-323-31 Pair Series Connection 100mA 10uA@70V 410mV@1mA 70V 70mA SOT-323-3 Schottky Diodes ROHSNexperiaSchottky DiodesPMF250XNEX
SOT-323-55℃~+150℃ 1 N-channel 1.05nC@4.5V 1A 212mΩ@4.5V 275mW 30V 750mV 8.5pF 81pF SOT-323 MOSFETs ROHSNexperiaMOSFETs
SSM6N35AFE,LF
SOT-563(SOT-666)10pF 12pF 1V 2 N-Channel 20V 250mA 250mW 340pC@4.5V 36pF 9Ω@1.2V N-Channel SOT-563(SOT-666) MOSFETs ROHSToshibaMOSFETsBAV99W
SOT-3231 Pair Series Connection 1.25V@150mA 100V 150mA 200mW 4A 4ns 500nA@80V SOT-323-3 Switching Diodes ROHSNexperiaSwitching Diodes
README
hardware/development/Kampela_C1_electronics/README.mdKampela integration prototype
This is the design for the first version of complete Kampela device.
Parts
192| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | 47x16 | Capacitor_SMD:C_1210_3225Metric | C6, C10, C11, C13, C15, C17, C19, C58, C59, C60, C61, C62, C63, C64, C65, C66 +21 |
| 17 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C4, C20, C23, C25, C26, C32, C33, C35, C36, C37, C38, C40, C41, C42, C46 +1 |
| 11 | 10K | Resistor_SMD:R_0402_1005Metric | R6, R7, R17, R18, R23, R24, R25, R26, R27, R28, R29 |
| 10 | SolderJumper_2_Open | MyLib:SolderJumper_0.8.x1mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 9 | 4.7x25 | Capacitor_SMD:C_0402_1005Metric | C34, C43, C45, C49, C52, C53, C56, C57, C87 |
| 7 | 1x50 | Capacitor_SMD:C_0402_1005Metric | C39, C47, C48, C50, C51, C54, C55 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP8 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R20, R21, R34, R35 |
| 4 | 22x6.3 | Capacitor_SMD:C_0603_1608Metric | C28, C29, C30, C31 |
| 4 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2, FID3, FID4 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10x16 | Capacitor_SMD:C_0603_1608Metric | C21, C22, C24 |
| 3 | BAT54WS | Diode_SMD:D_SOD-323F | D2, D7, D10 |
| 3 | E_ANT | MyLib:TestPoint_Pad_2.4x3.5mm | J1, J2, J8 |
| 3 | VAL** | MiceBite:mouse-bite-2mm_DEEP | mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 2 | , | ||
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R30, R33 |
| 2 | 100p | Capacitor_SMD:C_0402_1005Metric | C3, C27 |
| 2 | 150K | Resistor_SMD:R_0402_1005Metric | R12, R14 |
| 2 | 2.2 | Resistor_SMD:R_0603_1608Metric | R10, R32 |
| 2 | 47 | Capacitor_SMD:C_0603_1608Metric | C12, C14 |
| 2 | 470K | Resistor_SMD:R_0402_1005Metric | R19, R31 |
| 2 | 976K | Resistor_SMD:R_0402_1005Metric | R8, R11 |
| 2 | BAS70-04W | Package_TO_SOT_SMD:SOT-323_SC-70 | D4, D9 |
| 2 | BLM15AG102SZ1D | Inductor_SMD:L_0402_1005Metric | FB1, FB3 |
| 2 | BLM18KG102SN1D | Inductor_SMD:L_0603_1608Metric | FB2, FB4 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | PMF250XNEX | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q2 |
| 2 | SSM6N35AFE | Package_TO_SOT_SMD:SOT-563 | Q3, Q4 |
| 1 | D3Z13BF-7 | Diode_SMD:D_SOD-323F | D5 |
| 1 | 0.1 | Capacitor_SMD:C_0402_1005Metric | C44 |
| 1 | 0.47R | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 100 | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 130K | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 2.2uH | Inductor_SMD:L_Wuerth_MAPI-3015 | L2 |
| 1 | 22K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 3.3uH | Inductor_SMD:L_Wuerth_MAPI-3015 | L1 |
| 1 | 39MHz | MyLib:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 47K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 52.3K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 53.6K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 6.8K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 68 | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 82p | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | AP63200WU | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | APS6404L-SQN | MyLib:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm | U4 |
| 1 | AT25XE321D-UUN-T | MyLib:WLCSP 12-ball 3 x 2 x 3 Array | U5 |
| 1 | BAV99W | Package_TO_SOT_SMD:SOT-323_SC-70 | D1 |
| 1 | BZX84J-B9V1 | Diode_SMD:D_SOD-323F | D3 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J7 |
| 1 | Conn_01x08 | MyLib:PinHeader_1x08_P1.27mm_Vertical_Prog | J6 |
| 1 | D3Z5V1BF-7 | Diode_SMD:D_SOD-323F | D8 |
| 1 | E2154CS0C1 | MyLib:GDEY027T91-T01_bended | J4 |
| 1 | EFM32PG23B200F512IM40 | MyLib:QFN-40_EP_5x5_Pitch0.4mm | U6 |
| 1 | FC2012AN | MyLib:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | LMV7271 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | NC | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | NR3015T100M | Inductor_SMD:L_Wuerth_MAPI-3015 | L3 |
| 1 | NX138BKWX | Package_TO_SOT_SMD:SOT-323_SC-70 | Q5 |
| 1 | SB0603WC01-RG | MyLib:LED_DUAL_0603 | D12 |
| 1 | TOUCH | MyLib:HRS_FH34SRJ-6S-0.5SH(50) | J5 |
| 1 | TPS62171DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U3 |
| 1 | TXU0104PW | Package_DFN_QFN:Texas_R-PUQFN-N12 | U7 |
More from Alzymologist/Kampela
4- 2 layers115 × 46 mm
Kampela C1
Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem
171 parts21GPL-3.0 - 2 layers90 × 38 mm
Kampela
Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem
156 parts21GPL-3.0 - 2 layers100 × 38 mm
CoilDisp
Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem
119 parts21GPL-3.0
Similar boards
- 2 layers78.5 × 46 mm
Kampela G5
Kalapaja/kampela-hardware
Hardware design schematics and supplementary files for Kampela hardware signer
198 parts5GPL-3.0 - 2 layers82.5 × 127 mm
Power supply
nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.
59 parts - 2 layers43.2 × 31.8 mm
- 4 layers100 × 100 mm
- 4 layers82 × 55 mm
Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 6 layers40 × 100 mm
Digi
cookiemonsternz/Eurorack-DIGI
DIGI utilises an ice40UP5K fpga chip, featuring 5280 luts and a 48Mhz clock. This is accompanied by a USB-SPI interface for easy programming.
139 parts - 2 layers32 × 20 mm
- 2 layers121.5 × 136.5 mm
Questions
How big is the Kampela E1 PCB?
It measures 120.5 × 46 mm and has 2 copper layers, 1.09 mm thick.
What parts does the Kampela E1 use?
192 parts, built around the EFM32PG23B200F512IM40-C, AP63200WU, AT25XE321D-UUN-T and TPS62171DSG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kampela E1 KiCad files?
From the Alzymologist/Kampela repository on GitHub, at the commit this page was made from: the board is hardware/development/Kampela_E1/Kampela_E1.kicad_pcb and its schematic hardware/development/Kampela_A1/CoilDisp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kampela E1 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).