
Robots and motor control
4,066 boards- 4 layers46 × 55.8 mm

- 2 layers130 × 60 mm

Controller
Miceuz/StepperOverDMX
A system to control a stepper motor over DMX protocol.
39 parts13Apache-2.0 - 2 layers45 × 45 mm

- 8 layers28.9 × 28.9 mm

OpenAIO Whoop
OpenDrone-hw/OpenAIO-Whoop
Open-source 1S whoop AIO: flight controller, 4-channel brushless ESC, ExpressLRS receiver and analog VTX, 25.5x25.5 mm. Planned.
249 parts13CERN-OHL-S-2.0 - 2 layers33.5 × 29.2 mm

Stepperature
rekursiv/stepperature
Stepperature is a DIY, Open Hardware, Manual Pulse Generator (Quadrature) hand wheel interface for CNC, audio, or other projects.
37 parts13 - 2 layers115 × 115 mm

- 4 layers77.6 × 30.1 mm

- 2 layers18 × 31 mm

Probe adapter
SnakeOilXY/SnakeOilXY-LFR
Large format CoreXY 3D printer with a hybrid design of FR4 and printed parts.
13 parts13GPL-3.0 - 2 layers70 × 119 mm

- 4 layers8.3 × 5 mm

DRV8311 on motor driver
techy-robot/Mighty-Micro-Motors
Tiny drone motors with a high reduction gearbox, a precise mangetic encoder, and a FOC controller
22 parts13CERN-OHL-S-2.0 - 4 layers58.4 × 62.5 mm

CNC Boosterpack
terjeio/CNC_Boosterpack
A BoosterPack that provides 3-axis motor support for some TI LaunchPads
74 parts13 - 2 layers40 × 60 mm

Joint controller board rev d logic
aliahumanoid/alia-humanoid-core
Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.
43 parts12GPL-3.0 - 2 layers101.6 × 53.3 mm

Pcb files
daveydaid/Stewart-Platform-Head-Massager
Stewart-Gough Platform utilising Dynamixel servo motors. Control loop and simulation handled by PC side, sending control information to Arduino for servo actuation.
28 parts12GPL-3.0 - 4 layers65.9 × 52.9 mm

- 2 layers92.5 × 62.5 mm

DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 4 layers139.7 × 41.3 mm

Schemat
konrad1s/LineFollower-Kwark
Fast LineFollower Robot project. Build on STM32 F7 microcontroller with custom PCB. Software, Hardware and QT Application.
74 parts12MIT - 4 layers77.8 × 47 mm

DRIVER 8323 based
M-K-O-Hybrid-open-source/Iskander
Iskander is an open source driver for BLDC motors, the hardware support Six step commutation and FOC, still in the experimental phase but it will be ready as soon as possible
72 parts12MIT - 2 layers58.4 × 80.6 mm

- 6 layers75 × 50 mm

- 4 layers43 × 40.1 mm

- 2 layers20.6 × 49.3 mm

- 4 layers180 × 170 mm

Hw openmower yardforce
xtech/hw-openmower-yardforce
This repository contains the design files for a custom mainboard specifically designed for converting YardForce mowers to OpenMower
293 parts12CC-BY-4.0 - 2 layers32 × 42 mm

- 2 layers55.5 × 50 mm

Breakout
Ataraxia-Mechanica/Stormwalker-120
Stormwalker 120 is a V0 sized, high performance 3D printer capable of 140m/s² acceleration.
28 parts11GPL-3.0